Как установить CyanogenMod на свой Android. Как без проблем установить CyanogenMod на свой Android Прошивка андроид 5.1 для mtk 6580 cyanogenmod
v.5.1.1 Build 20
В целом, развитие CM переехал в CM13.0.
Список изменений:
Build 21
- Updated sources
Build 20
- Updated sources
Build 19
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 18
- Audio related fixes mostly
- Reverted boost to speaker & headphones, as it wasn"t needed and caused disortions
- Fixed broken AIF2 logic, earpiece speaker should now be much louder and with less disortions (Dhiru broke it)
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 17
- Misc audio corrections (+3db boost)
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 16
- Enabled kCollectorTypeHSpaceCompact for ART
- Changed malloc implementation to dlmalloc
# Both of above changes should greatly improve memory management and cut memory usage on low-memory devices
# Thanks to arter97 for finding them out and suggesting to use in i9300
Disabled ZRAM by default
- Implemented dex-preoptimization for ART
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 15
- Added workaround for bluetooth deadlocks found in AOSP Lollipops
- Added a possibility to change wi-fi MAC address (thanks to siracuervo)
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 14
- Fallback to B13 DRM blobs to fix chromecast
- Misc HWC improvements/fixes
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 13
- One more try on fixing Netflix (changed DRM blobs)
- I decided to go back to closed-source sensors, as open-source ones still didn"t satisfy me in terms of stability
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 12
- Went back to closed-source sensors, as open-source ones aren"t working completely perfect yet
- Fixed netflix, it should work properly now
- Updated sources
Build 11
- Increased earpiece volume slightly, as it was barely heard outdoor
- Fixed SELinux derps introduced in B10 (sysfs denials)
- Fixed more SELinux denials related to recently changed parts (open-source sensors & bluetooth)
- KERNEL: Fixed dm-crypt not accepting discard requests which resulted in failed encryption (CM10.2 regression)
- Updated sources
Build 10
- Fixed (compass) and reintroduced open-source sensors
- Misc SELinux updates
- Misc hwcomposer fixes and improvements
- Updated sources
- Android 5.1.1 revision 6 (LMY48G)
- Probably other things that I forgot already
Build 9
- Our CM sources have been rebased and resynced to fix derps and other misc issues
- Fixed most (if not all) hardware encoder/decoder issues
- Improved stability, compatibility, battery life and performance drastically while encoding/decoding movies
- hwcomposer improvements and fixes
- Wi-Fi firmware updates & cleanup
- Updated sources
Build 7
- Fixed mobile networks search (for good this time)
- Added proper touchkey backlight support. They don"t light up on screen touch anymore (stock behaviour)
- Hopefully fixed Wi-Fi dropouts during night
- Updated sources
Build 6
- Fixed mobile networks search
- Various kernel cleanups & stability improvements
- Updated sources
Build 5
- Kernel: Various improvements, zRAM should be more responsive now.
- RIL: Fixed & Updated Exynos4RIL java class, long shutdown issue resolved
- Updated sources
Build 4
- Android 5.1.1
- Kernel: Changed version type to -CM-ArchiKernel-base, hope you won"t mix it up with AK now
- Kernel: Does not include BFQ anymore, CFQ is default.
- Updated sources
Build 3
- Major updates to RIL (again)
- ArchiKernel: Haptic: Made get() and store() consistent
- Updated sources
Build 2
- Major updates to RIL client (V11)
- Updated i9300 RIL header (V11)
- Major updates to RIL blobs (XXUGOA2)
- Network settings FC fixed
- MMSes fixed
- Sensors fixes
- Added vibration intensity to stock kernel
- Updated sources
Build 1
- Initial release
- Everything what worked in CM12.0 should work, too
- Fast overview: HWC, RIL, Wi-FI, RIL, Sensors, Camera are fine, rest is untested
- MMSes not yet fixed (known bug from CM12.0)
Android Marshmallow update is out for many devices, still many users stuck with old Android Lollipop. Many devices which have stopped updating their version to Marshmallow will try Custom ROMs like CM12.1. But after flashing a custom ROM, you need to flash Gapps to get Google Services. We provide Gapps for Android 5.1/Lollipop so that your device will function without any problem. If you are planning to upgrade your phone or wants to flash CM12.1 based ROM, then you need to or gapps for Android 5.1 .
Gapps are the Google-based application such as Google play store, chrome, youtube, etc. which comes pre-installed on almost every device. Without Gapps, you can’t use Google services. Any custom ROM you flashed comes without any gapps you have to download google apps for Lollipop and flash it via custom recovery. We provide you the link with that you can easily Download Gapps for CyanogenMod 12.1 or Android Lollipop. So download gapps for cm12.1 before installing a new custom ROM and use your device without any problem. Most of the developers are using CyanogenMod 12.1 as the base for their ROMs, and most of other custom ROMs like Resurrection Remix , ParanoidAndroid, OmniROM, SlimROM etc are based on Android 5.1 or 5.1.1 Lollipop. So you need CyanogenMod 12.1 Gapps for all these ROMs. Most of the people don’t use all Google Apps like Google Games, Google Newsstand, Google Movies, Google Books and other.That’s why we list all types of Gapps package for CM12.1, which works fine on Lollipop based ROMs.
Download Gapps for CM12.1 or Lollipop based ROMs –
1) Open Gapps for CM12.1 –
Open Gapps is the most popular and one of the best Gapps for CM12/12.1. If you want to download gapps for cm12/12.1, you should definitely try this one. It comes with a different packages stock, mini, micro, pico, or nano gapps for cm12.1 etc. you should check the difference and download any gapps. Better to download nano gapps or Pico gapps both of these are light weight and includes only play store and play services. After that you can download any Google apps you used from play store. Download Open gapps for cm12.1 from the link below.
Download Pico Gapps for lollipop pack (61MB)
Android 5.0 Pico Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Android 5.1 Pico Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Download Nano Gapps for Android Lollipop Pack (97MB)
Android 5.0 Nano Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Android 5.1 Nano Gapps –
- 32-bit (ARM): Download
- 64-bit(ARM64): Download
Download Micro Gapps for Android Lollipop Pack (159MB)
Android 5.0 Micro Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Android 5.1 Micro Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Download Mini Gapps for Android Lollipop Pack (238MB)
Android 5.0 Mini Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Android 5.1 Mini Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Download Stock Gapps for Android Lollipop Pack (238MB)
Android 5.0 Stock Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
Android 5.0 Stock Gapps –
- 32-bit (ARM): Download
- 64-bit (ARM64): Download
For all other open gapps visit –
- Download – Open Gapps for CM12.1
2) Google Apps Minimal Edition for Android 5.1 & 5.0
This package provides minimal edition Gapps with proper installation of play services. The goal of these packages is to provide the smallest GApps pack for android lollipop possible in addition to de-bloating your custom ROM. These gapps is for both Android 5.1 and 5.0. Download minimal gapps for cm12.1 from the link below.
- Download – Minimal Gapps for Android 5.1 (91 MB)
- Download – Minimal Gapps for Android 5.0.x (90 MB)
3) TK GApps for Android 5.1 & 5.0
As we know PA Gapps for Android Lollipop was discontinued so goal of this Gapps are to provide the official continuation of the original PA GApps project from the original PA GApps Developers. Download PA gapps for cm12.1 from the link below.
4) Slim Gapps for Android 5.1 –
The purpose of this Gapps is to provide small size gapps so the package includes slim mini gapps and Slim Zero Gapps for android 5.1. If you want to download gapps for cm12.1 based ROM this one is one of the best and small size Gapps available. Download Slim gapps for Cm12.1 from the link below.
5) Delta Gapps for CM12.1 – This Gapps package is created by XDA member @Deltadroid . This gapps package automatically changes the dpi according to your device dpi. This package is available for all 32-bit devices. Download Delta gapps for cm12.1 from the link below.
How To Install Gapps On CM12.1 ROMs –
1) First you have to download Gapps for cm12.1 or Lollipop 5.1 & 5.0 and save it on your device.
2) Now boot your phone into recovery mode.
3) Once you are enter in recovery mode, you see the main screen like this.
4) Now if you are using click on ‘Install’ and select Gapps package or if you are using CWM click on install zip from sd card and select Gapps package.
5) After selecting the Gapps simply flash the zip file. Also clear cache and Dalvik Cache after flashing the Gapps.
This post was last updated on April 13th, 2018 at 03:31 pm
Galaxy S3 NEO CM12.1 (CyanogenMod 12.1, Android Lollipop) ROM is based on Android Lollipop 5.1 is again brought to you for Samsung Galaxy S3 NEO GT-I9300i, GT-I9301i and i9301Q by xda senior member Rox. Earlier Rox had built CM 12 and CM 11 for Galaxy S3 NEO. In addition to this we also have the , .
DISCLAIMER:
Installing custom ROM requires a , which may VOID your warranty and may delete all your data. Before proceeding further you may . You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you. Neither the developer nor we will be held responsible for any disaster that happens to your device.KNOWN ISSUES:
– NFC (Can’t be fixed, because of lack of sources)
– Audio in calls on 2nd SIM (GT-I9300I only)
– Some devices have non-working camera because they have different sensor –
REQUIRED DOWNLOADS AND LINKS FOR THE CYANOGENMOD 12.1 S3 NEO LOLLIPOP ROM FLASHING GUIDE:
Galaxy S3 Neo CM13 (CyanogenMod 13) ROM Update for :
GALAXY S3 NEO CyanogenMod 12.1 LOLLIPOP ROM INSTALLATION GUIDE:
If you have not yet installed a custom recovery on your S3 Neo then head on to the next link to get it done.
Points to NOTE on Backup:
– Try to avoid restoring apps backup using Titanium Backup. It may break things up.
– Don’t restore system data using Titanium Backup! It will definitely break the current installation.
– It is also discouraged to Restoring Apps + Data using Titanium Backup.
Follow this if you are flashing CyanogenMod 12.1 ROM for the first time to your Galaxy S3 NEO phone, or coming from another ROM:
- Download and Copy the GApps and Galaxy S3 NEO CyanogenMod 12.1 Lollipop ROM ZIP to your phone.
- Reboot the S3 NEO into recovery mode (Hole Volume UP + HOME + Power button while the phone is booting). Make sure to have a Custom recovery like .
NOTE:
It is recommended to use the CWM recovery , especially for the GT-i9300i users. - Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition.
– Here is a guide explaining .This will delete all your data on your phone. IGNORE IF YOU DON’T WANT TO OR IF YOU HAVE ALREADY DONE THIS. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM.
– .
– . - First flash the CM12.1 ROM ZIP from device. Then flash the GApps zip from your device memory.
– Here is a post explaining .
– Use the same guide to flash the GApps too. - Reboot and Enjoy the CyanogenMod 12.1 Lollipop ROM on your Galaxy S3 NEO.
Upgrading from earlier version of :
- Copy the latest Galaxy S3 NEO CyanogenMod 12.1 ROM ZIP file to your phone.
- Boot into Recovery.
- Flash the latest CM ROM ZIP from your phone.
– Here is a post explaining
CyanogenMod 12.1 Android 5.1 Google Apps for Lollipop 5.1/5.1.1: These are the Gapps packages that are compatible with Android 5.1 Lollipop . If you ever install a Cyanogenmod custom ROM or any other custom ROM for that matter, you’d notice that these applications are missing. This is because they are licensed apps and as such the developers of these ROMs cannot include them in their custom ROMs. You must install Cyanogenmod Gapps on your own if you want to use the Google applications. Please note that these apps are not necessary for the booting or running of the custom ROM. You can see a .
CM12.1 Android 5.1.1 Gapps Features:
- Android 5.1 Support
- Android 5.1.1 support
- Latest Google Play Services 7.3.26
- Latest Google Play Store 5.4.12
- Google Search App/”OK Google” everywhere feature
- FaceLock for SmartLock
- Fully compatible with CM12 and CM12.1 ROM based on Android 5.1 and Android 5.1.1
- Compatible with all custom ROM based on Android 5.1.1 Lollipop.
Downloads
You are downloading GApps (Google Apps) for installing Play Store on your Android device with a custom ROM . If you do not install Gapps, you will not have Play Store for AOSP ROMs like CM12 or CM12.1! These Gapps packages are compatible with Android 5.1 and 5.1.1 .
Installation
How do I install CyangenMod 12.1 Gapps ? So, you’ve downloaded the Gapps and want to install them on one of your Android smartphones, here’s what you need to do:
You will need to install the Google Applications packages via your device’s recovery. These steps vary from device to device, but the general process is the same as that used to install CyanogenMod , or any other flashable zip:
- Copy the gapps .zip-file to your /sdcard/
- Using adb: adb push filename.zip /sdcard/
- Reboot your device to recovery via any one of these methods: 1) using the power-on key combo for your device; 2) running adb reboot recovery from your computer.
- Choose “install zip” or “Apply update” from within recovery, and navigate to the zip-file loaded earlier.
- Reboot from recovery back to Android.
Troubleshooting
Google Apps packages are hardly ever supported by the CyanogenMod team, or by their distributors. The good thing is that there isn’t much that can go wrong when installing Gapps. If you are experiencing problems, here is a list of different things you can try (each one a bit more extreme/destructive than the last):
- Reboot your device
- Verify all apps are up-to-date in the Play Store
- Re-flash the Gapps package (via recovery)
- Wipe the /system partition and reinstall both CyanogenMod and Gapps (as long as if you don’t wipe /data, your data will be preserved)
- Wipe /system , /data and /cache and reinstall both CyanogenMod and Gapps (this will delete all of your data, i.e. like you’re starting from a clean slate)
If you still have problems consider googling for alternative Google Apps installation package. Thanks for reading, everything you need to know about Cyanogenmod 12.1 Gapps – Google Apps Downloads/Installation for Android 5.1 Lollipop .
Samsung предложил официальную прошивку Android 4.4.2 для Samsung Galaxy SIII (AT&T i747, d2att) еще в июне прошлого года. Насчёт официальной прошивки Android 5 пока ничего не слышно. Протестировав официальную версию Cyanogenmod 12.1 для AT&T Samsung Galaxy s3 , основанную на Android 5.1 Lollipop, понял, что возвращаться уже не хочется. Это самая быстрая прошивка, которая только у меня была. Немалую роль в этом может играть отказ от виртуальной машины Dalvik в пользу ART.
К счастью, исходный код Android открыт (по крайней мере, это касается Android Open Source Project или AOSP), поэтому можно не ждать обновлений от производителя, если энтузиасты предложили прошивку для вашего устройства. Даже очень популярный Samsung Galaxy SIII (AT&T i747, d2att) долго обходили стороной, не предлагая официальную прошивку Cyanogenmod 12, хотя неофициальных прошивок Android 5 на xda developers было множество.
Хотя различных прошивок Android 5 для AT&T Samsung Galaxy s3 много, я выбрал именно официальную версию CyanogenMod 12.1. Даже неофициальные версии CyanogenMod я предпочитаю обходить стороной. Даже официальная предполагает установку нового загрузчика, модема, а также Google Apps. Несмотря на открытый код, всегда есть риск подхватить вредоносное программное обеспечение. Поэтому конечно же официальная прошивка может быть предпочтительнее. С другой стороны, официальные прошивки обновляется очень редко, поэтому благодаря наличию не исправленных уязвимостей могут быть не столь безопасными при использовании Интернета на смартфоне.
CyanogenMod 12.1 мне понравился тем, что при перепрошивке все приложения восстановились. Правда, не знаю, благодарить ли за это предыдущую прошивку CyanogenMod или Google, т.к. я использовал оба варианта для синхронизации. Но именно Гугл позволяет сохранять список приложений и, при желании, даже их настройки, так что наверняка именно синхронизация с Гугл способствует восстановлению приложений. Хотя залогиниться при этом приходится в каждом приложении, требующем вход в аккаунт, заново.
Как установить прошивку Android 5.1 Lollipop (Cyanogenmod 12.1) на Samsung Galaxy SIII (AT&T i747, d2att)
Предостережение:
При перепрошивке телефона всегда что-то может пойти не так. Используйте инструкцию по прошивке ниже на свой страх и риск.
По состоянию на 26 мая 2015 года, на ночных сборках (nightly build) CyanogenMod 12.1 некорректно может работать Bluetooth. Кроме того, могут возникать проблемы с камерой, но можно поставить бесплатное приложение .
CyanogenMod уведомляет о наличии обновлений. Их сразу же можно скачать из меню настроек. Правда, в последних версиях при их установке прямо из Андроида возникала ошибка "E: Zip file is corrupt! E: Error installing zio file "@/cache/recover/block.map""
Установить при этом прошивку все же обновление можно. Для этого нужно перезагрузиться в режиме Recovery, далее выбрать Install ZIP (Установить ZIP) и выбрать архив, который из настроек скачивается в папку cmupdater на телефоне.
Обновление (6 июня 2015)
Тестирую cm-12.1-20150529-NIGHTLY-d2att.zip уже больше недели. Абсолютно всё устраивает, проблем не возникало вообще. Так что рекомендую установить CyanogenMod 12.1 на Samsung Galaxy s3 AT&T!
Обновление (16 июня 2015)
Тестирую cm-12.1-20150606-NIGHTLY-d2att.zip уже больше недели. По-прежнему всё стабильно. Приложения теперь найти стало проще, так как они выводятся по алфавиту, каждое рядом с соответствующей буквой, на которую начинается приложение. "Обновления по воздуху" (over the air или OTA updates) устанавливаются теперь без ошибки.
Обновление (24 июня 2015)
На предыдущей прошивке cm-12.1-20150606-NIGHTLY-d2att внезапно стали глючить приложения Google Apps. При этом постоянно возникала ошибка, а телефон стал очень сильно греться, аккумулятор при этом разряжался быстро даже после отключения передачи данных и навигации. Установил cm-12.1-20150620-NIGHTLY-d2att.zip и новые Banks GApps.
Обновление (26 июня 2015)
На предыдущей прошивке cm-12.1-20150620-NIGHTLY-d2att не работала камера. При её использовании стала возникать ошибка "Не могу подключиться к камере". Установил cm-12.1-20150625-NIGHTLY-d2att.zip, после чего в настройках отключил запись данных с координатами съемки. Фото и видео работает.
Обновление (28 декабря 2015)
На предыдущей прошивке cm-12.1-20150625-NIGHTLY-d2att.zip не понравилось включение/отключение Wi-Fi, хотя к остальнмо придраться не смог. Установил cm-12.1-20151228-NIGHTLY-d2att.zip и
