Installation through the menu "Install personal certificate. How to install CryptoPro - how to install a personal certificate in CryptoPro from a flash drive? Installing crypto
To protect the transmitted data on the Information Portal croinform.ru, a cryptographic information protection tool (CIPF) of the Crypto-Pro company is used. To install this software, follow a few simple steps.
Step 1. Downloading the CryptoPro CSP distribution (version 4.0)
To download the distribution kit, go to the CRYPTO-PRO website http://www.cryptopro.ru/
In the Login form, enter the following username: MBKI , password: MBKI and click Login
The Download Center page opens. In the list of programs, select CryptoPro CSP (First in the list).
Choose distribution kit CryptoPro CSP (version 4.0), which is suitable for your operating system. Save the file to disk.
Step 2. Installing CryptoPro CSP (version 4.0)
Run the distribution kit of the CryptoPro CSP program downloaded at step 1. The "Installation window" will appear on the screen. Select the recommended installation option, "Install (recommended)".
A window will appear showing the CryptoPro CSP installation process.
After the CryptoPro CSP installation process is completed, you will receive a message.
The temporary license is valid for 30 days. After this period, the full package of CIPF functions ceases to work, however, some of the information protection functions necessary for working with the Information Portal remain.
CryptoPRO is one of the cryptographic utilities (cryptoprovider). Which is necessary to generate an electronic digital signature () and work with key certificates. In this article, we will analyze in detail the process of installing the CryptoPRO program on a computer.
After you have purchased a CryptoPro CSP license or decided to try out a free three-month access to the program's functions, the question arises, how to use a computer?
How to install Crypto PRO
The answer, as always, is in the user manual, which is available on the official website of the program, and is also attached when purchasing a license. But since it so happened that no one reads it anyway, we will describe the installation process point by point.
First step: PC check
At this stage, you need to make sure that you do not have an old version of this program installed on your computer. You can do this by carefully reviewing all the Start menu items on your computer, if you did not find the CryptoPRO item in it, then most likely this software was not installed on your computer.
If you find CryptoPRO in the list of programs, make sure that its version is outdated, for this:
- Launch CryptoPRO PKI
- Open the License Management tab - CryptoPRO CSP
- Look at the version number in the right window
If the program version is 3.6.**** or higher, then reinstallation is optional and you can proceed to the fourth step. If the version is lower than 3.6.****, uninstall the program using standard Windows tools and restart the computer. Then move on to the next step.
Second step: downloading the distribution
Fill in the required fields, agree to the license agreement and go to the next page (at the time of writing the instructions, it looked like this):
Third step: installing CryptoPRO CSP on a computer
Run the downloaded file and follow the steps of the installer until you see the following window:
Enter the required information and the Serial Number you received when purchasing the license. If you would like a free trial, please leave this field blank and click Further.
 |  |
After installation is complete, restart your computer. Ready!
Fourth step: enter the license key (optional)
If the program is already installed on your computer and you only need to enter a license key, follow the next path.
Installation via the View Certificates in Container menu
1. Select "Start" > "Control Panel" > "CryptoPro CSP", go to the "Tools" tab and click on the "View Certificates in Container" button.
2. In the window that opens, click the Browse button to select a container to view. After selecting the container, click on the "OK" button.
3. In the window that opens, click the "Next" button.
4. In the next window, click the button« Install”, and then affirmatively answer the certificate replacement notification (if it appears). The certificate is installed.
5. If the "Install" button is missing, then in the "Certificate for viewing" window, click on the "Properties" button.
6. In the window that opens, select Install Certificate.
7. In the Certificate Import Wizard window, select Next . In the next window, leave the radio button on Automatically select a store based on certificate type and click Next. The certificate will be installed in the Personal store.
8. In the next window, select "Next", then click on the button "Finish" and wait for the message about successful installation.
Installation via the menu "Install personal certificate"
For installation, you will need a certificate file (a file with the .cer extension). The certificate file can be exported from the Personal store. If the store does not contain the required certificate, contact technical support at [email protected], indicating the TIN and KPP of the organization and the essence of the problem.
1. Select Start > Control Panel > CryptoPro CSP. In the CryptoPro CSP Properties window, go to the "Service" tab and click on the "Install personal certificate" button.
2. In the "Certificate Import Wizard" window, click on the "Next" button. In the next window, click on the Browse button and select the certificate file.
4. In the next window, click on the "Next" button.
5. Click the Browse button .
6. Specify the private key container corresponding to the certificate and click the OK button.
7. After selecting the container, click on the "Next" button .
8. In the Select Certificate Store window, click the Browse button.
If CryptoPro CSP 3.6 R2 (product version 3.6.6497) or higher is installed, then check the box "Install certificate in container".
9. Select the Private storage and click OK.
10. After selecting the storage, click on the Next button, then Finish. After clicking on the Done button, you may be asked to replace the existing certificate with a new one. In the prompt window, select Yes.
Wait for a message about successful installation. The certificate is installed.
During the reinstallation, you will need to enter a license for Crypto Pro, so you should find a license form in advance
You should install exactly the version of Crypto Pro for which the license was obtained.
Installation will require administrator rights on a Microsoft Windows system. During installation, you must disable your anti-virus program.
- CryptoPro automatic update
If CryptoPro version 2.0, 3.0 or 3.6.5365 and higher is installed at the workplace, then CryptoPro can be updated using the web disk or diagnostics. In this case, the removal of the previous version is not required. In other cases, reinstallation of CryptoPro should be done manually.
When you install the system using WebDisk or Diagnostics, the default version is set to CryptoPro 3.6 R4 developer company.
To check the installed version of CryptoPro, go to Start / Control Panel, open CryptoPro CSP. On the tab Are common the full version of the product will be listed.
Rice. 1. CryptoPro version
- Updating CryptoPro manually
1. Remove CryptoPro.
To clean all traces of the previously installed CryptoPro program, you need to use the utility cspclean. To do this, download the utility from the Software section, run the cspclean.exe file.
When using the cspclean utility downloaded from the Kontur-Extern website, deleting containers from the registrynot happening. If cspclean was saved from the Crypto-Pro website, then when you run the utility, you may be prompted to remove containers from the registry, which must be rejected.
2. To restart a computer.
3. Install CryptoPro using the web drive.
When you install the system using WebDisk, the default is CryptoPro 3.6 R4. CryptoPro versions 2.0 and 3.0 are no longer certified by the FSB, they are not installed from the web disk. If necessary, distributions of any versions of CryptoPro can be downloaded from the website of the developer company.
4. Enter the serial number of the license indicated on the form, which is issued at the service center along with the subscription service agreement.
5. Be sure to restart your computer after installation. Reinstall completed.
After reinstalling the CryptoPro CSP program, you should reinstall all available certificates (see.
CryptoPRO is a cryptographic provider that allows you to generate a digital signature and makes it possible to work with key certificates. The process of installing CryptoPRO on a personal computer is the subject of this article. Let's consider in detail how to install CryptoPro CSP for free.
The description of this process is contained in the user manual on the official website, which is also attached when purchasing a license. Let's analyze the procedure step by step.
Before starting work, the user needs to make sure that an outdated version of the product is not installed on his PC. The check is performed in the menu if the CryptoPRO item is absent, therefore CryptoPro plugin is not installed in the browser.
If the item of interest in the menu is found, you need to check if the version is outdated. To do this, launch CryptoPRO, in the License Management tab in the right window, look at the version number and license validity period.
Download CryptoPRO CSP
After it turns out that not installed CryptoPro EDS browser plug in, proceed to download CryptoPRO CSP and install it on your PC.
Since the provider is a means of cryptographic protection of information, accordingly, its distribution is recorded in certain supervisory authorities. In order to download the program, you will need to register. Then follow the link sent to your email. By clicking on it, we select CryptoPRO CSP from the list of products.
Installation CryptoPRO on a computer R
The installation file is downloaded before how to install CryptoPRO on a computer. To install, run the file. If the security system issues a warning, then you need to allow the program to make changes to your PC. Next, click "Install" and wait a few minutes. User participation is not required at this stage. After installation, it is recommended to restart your computer.
CryptoPRO license key
Now enter the license key.
- We look for CryptoPRO in programs, select CryptoPRO CSP
- Enter the serial number.
Check that the installed version matches the one you purchased. If you have version 4.0, then, accordingly, choose CryptoPRO CSP 4.0. This version is recommended for Windows 10.
CryptoPRO Certificate
Since the entire electronic document flow will be recorded by EDS, you need to know how to install a certificate in the Crypto PRO registry.
- Through the start go to the control panel.
- We select CryptoPRO and go to the "Service".
- Next, click "View Certificates in Container".
- We look for our certificate, select it, and the download starts automatically.
- In the storage selection window, click Browse and select "Personal". Click next and OK.
- Wait for the notification that the certificate was successfully installed.
