192.168 1.2 password and login admin. Internet connection setup. Network interface disabled

When you try to enter the router settings at 192.168 1.1, nothing opens? Of course, you can call a master who will take the price of a new router for the service ... But why deny yourself free pleasure when “do it yourself” is already in front of your eyes?

By wire or by air?

In older models of routers (for security reasons), access to the settings over the air was prohibited: only you can insert the power cord, and the neighbor hacker can “suck” through the air.

New models of routers allow over-the-air settings, and the reason for this was ultrabooks (so thin that they lost the network connector), tablets and smartphones (initially did not receive network jacks on thin cases).

If a wired connection is available, use it.

Is there a connection?

First of all, we check whether there is a wired connection, that is, we look at the router and at the computer. Unlike a garland, diodes on the body will not create a New Year's mood for you, but they will report on the current state of affairs.

LAN- wired network. The same indicator is also on the PC network card or directly on the network socket. The latter could become a victim for the sake of the compactness of the laptop, but it's still worth trying to find the indicator.

WAN- connection "from the provider to the router." If you connected a computer here, then you just made a mistake with the socket - you need it on the LAN. For compact models, the LAN and WAN sockets can be combined in one.

As for the indication itself, everything is extremely simple: on - there is a connection, blinking - data is being transmitted, off - there is no connection.

Maybe the address is different, not 192.168 1.1?

Router manufacturers are prudent people. They freed users from the need to read the instructions by putting the most important thing right on the case. By twisting the device in your hands, you can read the “address to enter the settings” on the back side. Maybe you don't have 192.168.1.1 at all?

If the penultimate block of numbers contains zero instead of one (192.168.0.X instead of 192.168.1.X), then the computer and the router cannot connect while in different address groups. Manual tuning will help them reach mutual understanding.

Finding someone to blame

As the Chinese folk saying says: if at least two have done one thing, the guilty one can no longer be found. These words apply to network connections as well.

The router has a DCHP service, the main task of which is to automatically distribute IP addresses to connected devices. But alas, it happens that automation fails - it assigns the same address to several connected ones. You can quickly overcome this either by reconnecting to change the address or by manually assigning the address.

It also happens that “out of the box” (or after resetting the settings) the DHCP service is turned off, and the computer is trying and trying to get an address from it ...

In any case, manual settings will always help you.

Click on the network connections icon, then select "network center and public access".

In the window that appears, you should try clicking on the red cross located on the diagram between the computer and the Internet.

The Troubleshooter will launch and attempt to identify and fix problems automatically.

If the module was able to solve the problem, it will report it. If not, it will show what exactly it can be.

If the problem is not solved, you should use the right tool: set the parameters manually... To do this, click "change adapter settings".

Then, in the list of connections that appears, select the connection. Right click on it and select "properties".

Once in the properties, double-click on "Internet Protocol version 4".

A small window will appear with the settings of those same network addresses. As you can see, everything is entrusted to do automation there ...

Click "use the following IP address" and see how the fields become available for change. We enter the address in the first field, paying attention to the penultimate block of digits of the router address: if it is zero, then you should also set zero, if it is one, you enter one. The last block of numbers - to taste, I set 34. To fill in the "subnet mask", just click in its field and it will take on the standard value 255.255.255.0

Click "ok" to apply the settings and leave all the windows open (they will still be useful to us).

Open the router in the browser. Now it will definitely open.

We go into the settings for 192.168 1.1 (login and admin password can be found on the device case).

Once in the router settings, find the DHCP service and enable it. This is necessary for the automatic distribution of IP addresses and will free you from fiddling with the settings.

If you do not like the address from the manufacturer, you can change it to a more convenient one for you. It is not even necessary to know what this setting is called, it is enough to find the field with the "address indicated on the body". To achieve mutual understanding between the router and the gadgets connected to it, write one in the third block.

When everything is set up at the router, it remains to "make it as it was" on the computer. To do this, go back to open window properties, double-click on "Internet Protocol Version 4".

In the window that appears, check the box "Obtain an IP address automatically" and click "OK".

Everything, now any device will be able to connect without hassle both by wire and via Wi-Fi.

List of IP addresses of routers from different manufacturers:

Asus routers - login at _http://192.168.1.1, admin / admin.
Zyxel ADSL routers - login at _http://192.168.1.1, admin / 1234
Zyxe Ethernet routers - login at _http://192.168.1.1, admin / 1234
TP-Link routers - login on 192.168.1.1, admin / admin
Netgear routers - 192.168.1.1 login, admin / admin
D-Link routers - login at 192.168.1.1, admin / admin

If you did not succeed, write in this thread, we will help!

Looking for how to enter the router to configure it? Why can't I log in and how to open the admin-panel of settings http://192.168.1.1? Some users try to enter the router settings to set the Internet parameters and wireless network and get to the results page Google search or Yandex. Why it happens?

To enter the settings through the admin panel, the router does not need to be connected to the Internet. Setup takes place without the Internet, by local network, via laptop, netbook or computer. Many users mistakenly believe that changing the settings takes place on the Internet and incorrectly connect the cable to the device.

For proper authorization in, you need to disconnect the Internet cable and connect a regular, short network cord (Ethernet). This cable is familiar to many who used to connect computers or laptops over a local area network by wire. Yes, there was such a time before the invention WiFi technology. Usually, an Ethernet cable comes with any network devices, routers, modems, routers, access points, etc.

You need to connect the router to a laptop or computer and try to enter the settings panel. You need to use only LAN ports for connection (! NOT WAN). When connecting, make sure that all indicators on the front panel are lit or flashing green.

As a last resort, reset the settings through the reset button on the back of the router. If even after resetting the settings and rebooting, you still can’t log in using admin admin on http://192.168.1.1, watch the following video:

Correct setting of TCP/IP and DNS address for 192.168.1.1.

Go to the properties of the connection used to connect to the settings of the router. This is usually the standard network connection, LAN connection. Open the network and sharing center, go to the properties and make sure that the checkboxes are in the position - receive automatically. The network connection must be active (no red cross).

If you can’t log in with such standard settings, you can try using manual parameters. In the IP field, you need to enter a network address from the same subnet as the router (192.168.1.1). This will be any ip with a value from 192.168.1.2 to 192.168.1.255. For example, you can take such an IP address - 192.168.1.12.

We leave the subnet mask as standard - 255.255.255.0. Gateway address = modem or router address = 192.168.1.1. DNS servers can be set to standard Google or any other, it does not matter. At Google it is 8.8.8.8.

After entering the new TCP / IP v4 parameters, do not forget to save them by clicking OK. We go back to the browser and try to log in. If this does not help, you can try to check the proxy settings, they should be disabled.

It still does not hurt to disable the standard Windows firewall or any other firewalls based on antiviruses, such as ESET. Such programs can block any network connections, including those to the settings panel http://192.168.1.1 by admin/admin.

Still unable to login? Carefully study the instructions, user manual of your router, modem, access point or router. If you do not have a paper copy of it, download it on the Internet at the manufacturer's website. Make sure that it is on 192.168.1.1 that the settings are configured. These may be other addresses, it all depends on the manufacturer (Tplink, Dlink, Asus, Netgear, Sagemcom, Zyxel, etc.)

Possible options:

• 192.168.0.1
• 192.168.0.50
• 192.168.0.3
• tplinklogin.net
• routerlogin.net
• and other login pages

Manufacturers keep up with the times and improve their products. On the latest models of routers, at the bottom, at the bottom of them, there is a sticker indicating all the important data. Including the login and password for connecting via Wi-Fi (if available), the address of the settings page, the login and password for authorization, the pin code of the device, and other information.

Remember that in all difficult situations related to the setup, you can be consulted by the technical support service of the Internet provider. The truth about customization WiFi networks they help reluctantly, tk. this does not apply to the services they provide. But they simply have to set up an Internet connection.

I hope that this information helped you at least a little to understand the difficult issue of connecting to 192.168.1.1 and the login with the password admin / admin came up. If so, share the article on social media. networks or ask your questions in the comments. Good luck to all! 🙂

The more people use broadband Internet access, the more often the question arises - how to enter wifi settings router?! Many even know that IP is used to enter the router settings. 192.168.1.1 , or less often - . And yet, with access to the web configurator, some incomprehensible stories constantly arise, forcing the user to surf the Internet in search of an answer - how to enter 192.168.1.1 to configure the router. This manual will fully answer all your questions and help you understand all the basic subtleties associated with accessing the configuration parameters of a wireless router.

What we're going to talk? To begin with, I will conduct a small "educational program" and tell you in brief what kind of addresses 192.168.0.1 and 192.168.1.1 are, why they are needed in home network, where they need to be entered in order to enter the page with the settings of the router and what to do if this does not work ?!

Most often, such questions are of interest to those who have just connected to the Internet, bought a Wi-Fi router for this, and then do not know what to do with all this stuff! This is how modern network devices are arranged that before you put it on the network, you need to change the basic configuration settings to those recommended by the provider to which you are connected. You will also have to open the router settings if the Internet has stopped working due to the settings being lost, or when you need to change the WiFi password or any other options. Moreover, no matter what router you use - Asus, Zyxel Keenetic, Tp-Link, D-Link, NetGear, Trendnet, Tenda, Linksys or something else - the process of logging into the router's web interface through the IP address 192.168.1.1 (or any other) is almost the same everywhere and no different!

IP 192.168.1.1 - what is this address and how to use it

Any modern Internet access device, be it an ADSL modem, a WiFi router or an xPON optical terminal, is a mini-computer! It has its own processor and RAM, and it is controlled by a special operating system. Therefore, one should not be surprised at such an abundance of various settings and functions that modern routers are endowed with. Two networks are usually connected to this mini-computer:

1. WAN or Wide Area Network- this is an external network that comes with the provider's cable.
2. LAN or local area network- this is your home network, which will include a computer, laptop, phones, tablets and Smart TV TV.

So 192.168.1.1 is the IP address of the router on the local network, using which you can enter its settings. The same IP is the gateway for the home network.

Recently, manufacturers have begun to assign ordinary home Wi-Fi routers on a par with this domain names in the local network. The brightest examples:

Asus - asusrouter.com TP-Link - tpinklogin.net, tplinkwifi.net or tplinkmodem.net Zyxel Keenetic - my.keenetic.net NetGear - routerlogin.net Rostelecom routers - http://rt

That is, in the address bar of your web browser, instead of the IP address 192.168.1.1, you must enter a symbolic name and press the "Enter" button.

How to find the IP address of a WiFi router

As I said above, to organize a home network and access to management, each router has its own local IP address through which it will be available to all clients. It will also be listed as a gateway for all gadgets connected to it. How to find the address of the router? Yes, very simple. We take it in our hands and turn it over. For example, I will show a sticker on the Netis DL4320 modem:

On reverse side case there will be a sticker on which all the basic information about the network device is written - manufacturer, model, serial number. Also, in a separate area, the IP address of the router will be registered - 192.168.1.1, 192.168.0.1 or some other. It is this set of numbers that will need to be entered in the address bar of the browser.

If instead of Ai-Pi a symbolic address is registered, then it will already be necessary to enter it. Example - TP-Link TL-MR4320 WiFi router:

By the way, the login and password for entering the router through 192.168.1.1 is written there. Typically, this is the username − admin and password - admin.

If the device suddenly does not have a sticker, then use the instructions from the manufacturer.

How to login to 192.168.1.1 in router settings

Let's take a step-by-step look at how to properly connect and enter the router settings through 192.168.1.1 for beginners!

Step 1. We start with the fact that you first need to properly connect your computer or laptop to it, using which we will further configure the router:

The best way to do this is through the supplied network LAN cable. You can see the connection diagram in the figure. That is, we connect one end of it to the network card of a PC or laptop, and the other end is plugged into the LAN port on the router. In general, you can enter 192.168.1.1 via WiFi, but for this you need to either know the password from his Wi-Fi, or be able to click on. on the router, and then connect within two minutes.

Once you connect to the network device, operating system Windows can automatically set the connection status to "Restricted" or "No internet access". Don't be afraid - it's normal. Since the device is not configured, it does not have access to the global web! This does not affect access to the web configurator!

Step 2 We launch the web browser. You can use absolutely any browser, but I would still recommend using either Google Chrome, or Microsoft Edge. Alternatively, Opera will do. But with Firefox, sometimes there are problems with the markup and the work of interactive elements,

Step 3 In the address bar, where you usually write the site address, type the IP address of the router - http://192.168.1.1(or http://192.168.0.1 depending on what it says on the sticker). We press the "Enter" button. If everything is set up correctly and there are no problems, a window should appear with fields for entering a login and password, as in the picture above. Enter the authorization data to open the web interface. Usually used to login to 192.168.1.1 login admin , password admin . On some D-Link models the password may not be requested. On Tenda routers, the username and password may not be required at all!

The router control panel is needed so that you can set up an Internet connection, change the access point name and password, check the Internet is working, etc. Most routers are programmed under a single address 192.168.1.1 or 192.168.0.1. But it is not always possible to simply enter this address in a browser and access Personal Area router. Sometimes there are problems that prevent this.

What to do to enter the control panel through http://192.168.1.1

The most important aspect is that your router must support active point Wi-Fi access. The device must do this even if it does not connect to the Internet. If this does not happen, try disconnecting the router from power, wait 20-30 seconds. and connect it to the network again.

Also, sometimes a complete reset of the settings helps - for this, a special button is provided on the router, which is often signed as “reboot” or “reset”. Sometimes, instead of a convex button, a narrow hole is provided where you need to insert a needle or match and hold the button for 30 seconds. before full reset settings. In this case, the connection name (192.168.1.1) and password are returned to the factory values ​​(admin admin) - they must be indicated on the router body.

After the Wi-Fi hotspot is detected by your computer, connect and go to the browser. Type in the address bar. If nothing happens, try 192.168.0.1. On the page that opens, you need to enter the username and password of the administrator.

Please note that the authorization data of your access point is not related to the admin panel. If you did not change it yourself, then you can enter your personal account using the login and password "admin". Sometimes the manufacturer sets other standard settings- look for information on the box of the router or in its documentation.

The router works, but does not enter the personal account 192.168.1.1

If you encounter this situation, make sure you are using the correct control panel address. On most routers this is http://192.168.1.1, but on some models (D-Link, Tenda, etc.) 192.168.0.1 is used. Try connecting the router using the built-in power cord slot. In this case, the computer must independently connect to the Internet, which is configured on the router.

If that doesn't help, check your IP and DNS settings in Network and Sharing Center (in Windows 7 and 10). To do this, right-click on the Internet connection icon, click LMB (left mouse button) on the section with the appropriate name. The control panel will open, right-click (right-click) on the connection name opposite "access type" and in the opened context menu select properties > IPv4.

Here you need to check the boxes next to the items that cause the automatic determination of DNS and IP addresses. Static data should only be specified if it is predetermined by your ISP.

In this case, you need to indicate those identifiers and registration subscriber data that were issued to you during the execution of the contract. If you were not given them or you have lost the necessary information, call the technical support of the provider and find out the IP / DNS.