Change imei huawei e173 at commands. Change your modem to be defined as a smartphone. How to unlock Huawei modem using AT commands. And another very simple way to IMEI on Huawei modems
Repair \ change IMEI on the example of a modem HuaweiFirst you need to download QPST. Download: QPST 2.7 Build323
1. Install QPST.
2. We launch QPST Configuration: Start - All programs - QPST - QPST Configuration
3. device Manager -> Ports (COM and LPT) Finding the port number Huawei-3G Application Interface)
4. If there is no port number, click " Add a new port" (Add New Port)
5. Choose here COM port which corresponds 3G Application Interface
6. This is how your modem should show up
7. Press " Start Clients"at the top
8. Choose " RF NV Item Manager"
9.
A window like this will appear
10.
Click Setting - Comport - Choose a port
12.
The reading / processing process will start NV item from the modem
In the displayed result, we will not see the item we need ( NV_UE_IMEI_I)
13. Press again " file" and choose " Read Supported RF NV Items"
Now everyone will be visible. NV points
14. Choose ( NV_UE_IMEI_I) I have it under the number 550
15. Here you will see on the right side 9 empty fields (if you don't have IMEI)
16. Put a tick in the box hex"and in the empty fields we write a new IMEI. But you need to write not in the original format (this is not possible 3 44 30 40 85 11 33 67 ), but in Hex format (this is how it should be 8 3A 44 03 4 58 11 33 76)
Important: In the first field, you must enter a value - 8
In the second field, the first digit of your IMEI in this form - 3A
In the fifth window, one digit of the value is entered (in the original IMEI this is the 4th set of characters, usually tens ( 10,20...80,90
)
In the remaining windows, numbers are entered in mirror image.
Example: real IMEI - 3 23 54 30 15 61 53 37
Which must be entered 8 3A 32 45 3 51 16 35 73
17. IMEI entered, press again " file" and choose " Write Only Listed NV Item To Phone"
All IMEI installed.
Important: write IMEI correctly and very carefully the first time, there will be one attempt, the second time IMEI will be write-protected.
In the same way, you can try to do it with modems ZTE MF.
And another very simple way to IMEI on Huawei modems
IMEI can be changed with AT commands And . How it's done and commands.
1. The modem must be connected to the computer and all drivers must be installed on it.
2. First, we give the following command to the modem at^datalock="code" with quotes and press the button " Enter"should be the answer OK, where instead of the word code, write the unlock code for your modem using your native IMEI. This command removes the ban on writing to the modem's memory.
3. Then, without turning off the modem, we give the command to change the IMEI at^cimei="new imei" with quotes and press the button " Enter"should be the answer OK, where instead of new IMEI write what you want.
ATTENTION!!! All actions you do at your own peril and risk. The site administration does not bear any responsibility for your actions. Changing IMEI is not entirely legal! (no proofs). Following the recommendations from this topic, you take full responsibility for the consequences.
Earlier on our website, we touched on the topic of changing IMEI to various devices. Including various manufacturers. Today we continue to publish these materials and consider how to change IMEI on HUAWEI modems.
First of all, you will need Qualcomm Product Support Tools (QPST) you can download it for free from our website. Further:
1. Install QPST.
2. Run QPST Configuration: Start-All Programs-QPST-QPST Configuration
3. Device Manager -> Ports (COM and LPT) Find the port number (for Huawei-3G Application Interface)
4. If there is no port number, click the Add New Port button
5. Here you select the COM port that corresponds to the 3G Application Interface
6. This is how your modem should be displayed
7. Click "Start Clients" at the top
8. Choose "RF NV Item Manager"
9. A window like this will appear
10. Click Setting-Comport-Select a port
12. The process of reading the processing of NV item from the modem will start
In the displayed result, we will not see the item we need (NV_UE_IMEI_I)
13. Click "File" again and select "Read Supported RF NV Items"
Now all NV items will be visible
14. Select (NV_UE_IMEI_I) I have it at number 550
15. Here you will see 9 empty fields on the right side (if you do not have IMEI)
16. Put a tick in the "Hex" box and write a new IMEI in the empty fields. But you need to write not in the original format (this is not possible 3 44 30 40 85 11 33 67), but in Hex format (this is necessary 8 3A 44 03 4 58 11 33 76)
Important: In the first field, be sure to enter a value - 8
In the second field, the first digit of your IMEI in this form - 3A
In the fifth window, one digit of the value is entered (in the original IMEI this is the 4th set of characters, usually tens (10.20 ... 80.90)
In the remaining windows, numbers are entered in mirror image.
Example: real IMEI - 3 23 54 30 15 61 53 37
Which must be entered 8
3A 32 453
51 16 35 73
17. IMEI entered, again click "File" and select "Write Only Listed NV Item To Phone
All IMEI installed.
Important: write IMEI correctly and very carefully the first time, there will be one attempt, the second time IMEI will be write-protected.
In the same way, you can try to do this with ZTE MF modems.
And another very simple way to IMEI on Huawei modems
IMEI can be changed using AT commands and terminal programs. How it's done and commands.
1. The modem must be connected to the computer and all drivers must be installed on it.
2. First, we give the modem the following command at ^ datalock = "code" with quotes, where instead of the word code, write the unlock code for your modem using your native IMEI. This command removes the ban on writing to the modem's memory.
3. Then, without turning off the modem, we give the command to change the IMEI at ^cimei = "new imei" with quotes, where instead of the new IMEI write the one you need.
AT command is used to control some of the modem's functions. Commands can be entered special programs, it's much easier than the built-in Windows XP hyperterminal. To do this, you can use the programs: My Huawei Terminal, DC-Unlocker or Mini Mobile Data. Before using these programs, you must close all other programs that may be using the modem. For Huawei modems, you need to connect to the COM port 3G PC UI Interface, for ZTE MF modems on COM port ZTE Proprietary USB Modem. How to use, look at the pictures, everything is quite simple. If there are several commands, first enter one - press Enter, then the next one and press Enter again. |