Functions of a bluetooth headset. How to choose a Bluetooth headset for mobile phones. Connecting Bluetooth headsets to mobile phones Attached topic bluetooth headphones for phone

Wireless headsets are more commonly used for phone calls. cellular network. The hand remains free, which provides comfortable conditions for a long conversation. And with bluetooth headphones, there is no inconvenience with wires. Before you can start using your wireless headphones, you need to pair with another device.

Ways to connect bluetooth headphones to your phone

Wireless headsets are connected in two ways: standard and advanced.

In the standard method, the connection is made through the settings menu of the mobile device. The user does not need to download third-party applications, it is enough to activate bluetooth headphones and confirm pairing. In this case, there is no access to some parameters provided by the headset manufacturer.

For extended connection, use the proprietary utility of headphone or smartphone manufacturers: Sony | Headphone Connect, Samsung Level and Motorola Connect. Such programs allow you to make advanced settings and know the remaining battery charge. If the application is not preinstalled initially, you need to download it from the official website or the Google Play store.

Instructions on how to connect bluetooth headphones to the phone in a standard way

1. Open your phone settings and select bluetooth.
2. In the new window, switch the switch to the active state. After turning on the module wireless communication, the smartphone starts scanning for nearby active devices. The search time is limited, more often it does not exceed 90-105 seconds. If no headset is found, the module will go into standby mode and you will need to reconnect.
3. When the phone searches for new devices, Bluetooth headphones should activate discovery mode. The manufacturer is responsible for the implementation of the mode, more often it is a long hold of the power button for 3-5 seconds. There are headphone models where a short hold is used - 2-3 seconds.
4. Pay attention to the power indicator. If the headphones are turned on in discovery mode, the LED flashes quickly and sometimes changes to two colors. When turned on normally, the diode blinks 3-4 times less often.
5. If the headphones are in the "detection window" of the smartphone, the name of the headset will appear on the screen. You need to select an accessory, and enter the password in the window that appears - 0000. This is a standard combination for most bluetooth headsets.
6. Further connection, does not require re-detection of the headphones. It is enough to turn on the power of the headset and bluetooth in the device settings. The exception is if the headphones are connected to a new phone.

Instructions on how to connect bluetooth headphones to the phone in an extended way

As an example, consider connecting using the Motorola Connect app and Motorola Surround headphones. Pairing other accessories with similar applications, follow the instructions below.

1. Download and run the Motorola Connect app at mobile device if the program is not installed.
2. Turn on the headphones, and in the program click on the "+" button to add a device.
3. The application will ask you to turn on bluetooth, for which the corresponding settings item will open. It is enough for the user to switch the switch and return back to the program.

Headphones are ready to use. To reconnect, just turn on the headset and activate bluetooth. The application will report the connection status, as well as let you know the remaining battery capacity and the location of the accessory.

Important! The Motorola Connect app or third party equivalents are restricted. Requires a device with Android 4.3 or higher. It is also allowed to connect only the accessories listed in the list.

Video of connecting bluetooth headphones to the phone

Conclusion

Connecting bluetooth headsets through a proprietary application is easier. Additional features are also available, in the form of searching for headphones, viewing the remaining charge and some other settings. At the same time, such programs are supported by a limited number of phone models, and even fewer accessories. In this case, the connection should be made in a standard way through the phone's settings menu.

In the second half of 2016, Apple introduced a new iPhone generation without a separate headphone port, after which smartphone manufacturers around the world followed the example of the "apple" corporation and released their devices without a minijack. As practice has shown, users can easily do without a 3.5 mm jack - in 2017 there is a huge range of Bluetooth headphones. But what about those who value their wired headset or simply do not want to overpay for a wireless module in standard headphones? Purchase a compact Bluetooth receiver. About the best inexpensive wireless receivers and will be discussed In this article.

How to choose a Bluetooth receiver

When choosing a device, it is necessary to pay attention not only to obvious things (price, case quality and battery capacity), but also to the wireless module - be that as it may, it is the main component of the Bluetooth receiver. When buying a gadget, you should choose the following characteristics correctly:

1.Bluetooth version
When choosing a wireless version, the rule is very simple: the newer Bluetooth technology, the better (Bluetooth 4.1 better bluetooth 3.0). This is due to the fact that in each new version wireless communication developers improve certain components (connection distance, data transfer rate, power consumption). It is strongly not recommended to buy a device with a Bluetooth version lower than 3.0 (also referred to as 2.1 + EDR). You should also pay attention to the Bluetooth version of the device from which music is transferred to the headphones:

When transferring Bluetooth data between multiple devices, the lowest Bluetooth version of all gadgets is always used.

If the receiver is equipped with a Bluetooth 4.1 module, and Bluetooth 2.0 is installed in the smartphone, data transfer will be carried out over the worst communication channel.

2.Bluetooth codec
On this moment There are three codecs for the A2DP data transfer protocol (used in all Bluetooth receivers): Subband Coding (SBC), Advanced Audio Coding (AAC) and AptX. The first is the worst due to the high compression ratio of the transmitted media file, which in turn degrades the sound quality. The best is AptX, which allows you to transfer music at a high bitrate.

Best Bluetooth Receivers

We have selected the best Bluetooth receivers from $4 to $30, each of which can be purchased on the AliExpress marketplace or anywhere else. Moreover, we have indicated only the best options from the most popular models - guided by the rules described above, you can choose any other device yourself.

Sybil BT310 (160−190 rubles)

This device is the cheapest Blutooth receiver in today's article. It comes with an AUX adapter, thanks to which you can not only insert headphones and other headsets into the gadget, but also connect it to the radio and portable speakers. In addition, the device has a built-in microphone - in case you use the headphones as a headset. Turning on / off, as well as pause / playback is carried out using a single translucent button. Below it are indicator lights.

• AptX support: no.

Bluetooth receiver in the form of a flash drive (308 rubles for two pieces)

This device is very similar to the previous one, except for the form factor: this Blutooth receiver is presented in the form of a flash drive with a USB connector, through which the gadget is charged. Also, this device does not have control buttons and a microphone.

• Bluetooth version: 3.0 (2.1+EDR).
• AptX support: no.
• Battery: yes (capacity unknown).

Powstro BT310 (524 rubles)

Powstro BT310 is the golden mean between very cheap and moderately expensive Blutooth receivers. This keychain-shaped gadget is equipped with music control buttons, a microphone, an indicator light and a clip. The kit comes with an AUX adapter, which allows you to use the device as a receiver not only for headphones, but also for the radio and portable speakers.

• Bluetooth version: 4.1.
• AptX support: no.
• Battery: 140 mAh.

Xiaomi Mi Bluetooth Audio Receiver (1148 rubles)

Psttl BTI-025 is the best Bluetooth receiver among all the devices in this article. The gadget is equipped not only with good technical specifications, but also function buttons on the case. Among other things, the device can also transmit a signal (and not just receive) - this is regulated by a special switch.

• Bluetooth version: 4.1.
• Aptx support: There is.
• Battery: 200 mAh.

Will a Bluetooth receiver replace full-fledged wireless headphones?

If you need to use a Bluetooth receiver for sports training or to interact with the radio, then even the cheapest devices discussed in today's article will do. An exception can only be for music lovers who are too picky about minor sound distortions.

If you want to use a combination of wired headphones with a Bluetooth receiver to listen to music in a relaxed atmosphere, then you should pay attention only to expensive gadget models - be that as it may, not everyone will be able to enjoy music with distortion (albeit slight).

Articles and Lifehacks

Headphones and bluetooth headsets for the phone - in the highest degree useful accessory, especially for those who have to be behind the wheel for a long time. There is no need to keep the phone near your ear, especially since it is simply prohibited in many countries.

It is enough to press a button on the headset - and you can talk without removing your hands from the steering wheel. The range of models of such devices is quite extensive.

Among them there are headsets that provide high noise reduction, headphones designed for high-quality sound reproduction, as well as just models with long battery life.

For most options wireless headphones they are not inferior to wired ones, the only thing they lose in is autonomy and, of course, in cost.

Headset options

• One of the differences is mono or stereo sound reproduction. The first option is quite sufficient for a conversation, and even more preferable in certain circumstances. The second is more suitable for listening to music.
• The type of headphones is also an essential parameter: they can be overhead or in-ear. The latter are more compact in size, while overhead systems are characterized by higher quality.
• Headsets may also vary in time battery life. Depending on the type, it can vary from several hours to several days.
• When buying, you should also pay attention to the mount. The headband has practically fallen into disuse, today headsets are usually attached to the ear with a special flexible headband.

Shouldn't be saving

Unlike wired headphones, this device is quite critical to the quality of the manufacturer. Here, the most vulnerable element is the battery, which, from unscrupulous manufacturers, can quickly fail or have a low capacity.

The poor quality of sound reproduction also causes a lot of problems, especially for those who purchase stereo headsets for regular listening to music.

Although, of course, such devices are spared the eternal problem - breaking the wires at the plug.

In one of the latest reviews, he talked about a bluetooth module with support for the Aptx codec and shared plans to remake the aforementioned FM headphones into a bluetooth version.

Now I want to report on the work done and the result. Briefly. Mostly in photographs.

So, there was such a product

As you can see from the photo in the first review, the headphones have a board with an FM receiver, two control buttons and a variable resistor for volume control, paired with a power switch, I decided not to throw away the existing stuffing, but to use it:
- variable resistor with a switch, like a power switch (otherwise, the amplifier module will gradually discharge the battery while the headphones are on the shelf);
- I decided to adapt the two available buttons to control the bluetooth module;
- the FM receiver board, as a basis for placing the bluetooth module, having removed a couple of interfering parts;
- and, of course, an LED to indicate the operating mode.

I decided to install the three missing buttons (soldering them together for rigidity) directly on the inside of the right ear cup

In the original version of the headphones, the microphone was installed in the base station. Since now the bluetooth version should be completely self-sufficient, having removed the smut) from the long-broken, but saved headphones, I installed them in this project.

By the way, the microphone was also installed unsuccessfully in the donor headphones: it was installed on the take-out, as expected, and at the base of the hood, i.e. in the headphone housing, which made the sound very quiet.
As can be seen from the photo, this omission has been corrected. Unfortunately, the microphone, with a diameter of about 5 mm, did not fully fit and protrudes slightly, but there was no other at hand.
For three soldered clock buttons, I drilled holes in the case and secured it with hot glue. All connections were made with MGTF wire.
Since the module needs power, and the battery compartment is located in the left cup of the headphones, having removed a single-core wire (formerly an FM antenna) from the groove of the head, I laid two MGTF cores.

I had to cut the tracks on the FM receiver board so that I could use the switch, buttons and LED with a current-limiting resistor. Connected to the module with the same MGTF.
The bluetooth module was attached with double-sided tape to the underside of the FM receiver board.

In the left cup of the headphones I placed the BL-4C battery from Nokia phone with a charging control module based on TP4056 with protection (I will not describe its operation here - there is a lot of information about its application and connection on the network). To do this, I had to dismantle the contacts in the battery compartment. I glued the same double-sided tape to the bottom to mount the controller. In the side wall of the cup, I cut out a window for connecting the charger from the phone (the compartment is closed with a decorative overlay). The battery compartment had to be cut to fit the battery.

The result of labor

Now the Scan button switches the track forward, Reset - the track back. Additional installed buttons: top - volume +, bottom - volume -, middle - play, pause and when held for 5 seconds - pairing with another bluetooth device.
After almost four hours of work, I received excellent bluetooth headphones for very modest money. The quality of sound and connection is incredibly satisfied. Just as pleased that saved appearance and added functionality (microphone).
P.S. to implement the work of the Aptx codec embedded in the CSR8645 chip, the signal source (smartphone, computer, etc.) must also support this codec. To transmit from a computer, I used an Orico bta-403 bluetooth whistle on a CSR8510 chip.

I plan to buy +82 Add to favorites Liked the review +94 +192

For a long time, only a wired headset was connected to a mobile phone. But in the mid-2000s, Bluetooth technology gained a lot of development. Mobile phones with its support have learned to transmit sound through the air. Headset manufacturers could not help but take advantage of this. The first models were inserted into one ear, and their main task was to free their hands while driving. But with further advances in technology bluetooth wireless the headset has acquired a second ear and support for the stereo effect. Of course, there are still mono headsets, as you will see by reading today's material.

Headset selection

On the shelves of stores you can find a huge number of headphones designed for mobile phones. Some of them have at their disposal a microphone and the ability to connect wirelessly. This makes them a full-fledged Bluetooth headset.

When choosing specific model should focus on its purpose. If you want to free your hands in the car, then you are quite satisfied with the "one-eared" copy. Its main advantage is longer battery life. Well, fans of listening to music should pay attention to stereo headsets, of which a lot has been released lately. It remains only to decide on the form factor, because there are large overhead and miniature plug-in devices.

Jabra Talk

• Headset Format: mono
• Wireless module version: Bluetooth 3.0

Price: from 1,599 rubles.

Advantages

• High reliability.
• Simple connection.
• Convenient clip.

Flaws

Jabra MINI

• Headset Format: mono
• Wireless module version: Bluetooth 4.0

Price: from 1,490 rubles.

The creators of this headset have relied on long battery life. To do this, they endowed their creation with the support of an energy-efficient Bluetooth standard 4.0. They also slightly increased the capacity of the built-in battery, due to which the weight of the device was nine grams instead of the usual seven. As a result, you can talk through this mono headset for nine hours.

Advantages

• Compatible with any smartphones and phones.
• Convenient use.
• Availability of LED indicator.
• System present active noise cancellation.
• Relatively low price.
• Long talk time.
• High reliability.

Flaws

• There are defective copies.
• The volume of voice alerts is not adjustable in any way.

Jabra Boost

• Headset Format: mono
• Wireless module version: Bluetooth 4.0

Price: from 2,000 rubles.

Advantages

• High reliability.
• Simple connection.
• Compatible with any device.
• There is digital noise reduction.
• Convenient clip.
• There are two buttons for handling calls.
• Support for HD Voice technology.

Flaws

• Not the longest job.
• Recharging only from the native charger.

Bang & Olufsen BeoPlay H5

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.2

Price: from 12,490 rubles.

This device is a wireless headset, in which the cable is still present. They combine two headphones - this allows you not to lose them while jogging or just during storage. One of the latest versions of Bluetooth is used here. Its main difference lies in the support of AptX technology, which significantly improves the sound quality of music. It should be noted that if you need a long-playing Bluetooth headset for your phone, then you definitely should not look towards the Bang & Olufsen BeoPlay H5. The talk time of this device is only 5 hours.

Advantages

• Relatively small overall weight (18 g).
• Convenient plug-in design.
• There is an LED.
• Using one of the most latest versions bluetooth.
• The presence of dust and moisture protection (but you can not dive under water).
• High reliability.
• Fast connection to most smartphones.

Flaws

• Very high cost.
• Not the longest running time.
• Poor interaction with Macbooks.
• Proprietary charger connector.

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.2

Price: from 500 rubles.

The Russian manufacturer Defender produces simple, uncomplicated headphones with average sound quality. Claimed battery life reaches seven hours of talk time. There is a compact and convenient remote control on the wire. Pleased with the price tag wireless device. You won't find anything better for the money!

Advantages

• Support for A2DP, AVRCP and some other technologies.
• Good appearance.
• Minimum price tag.
• Convenient design.

Flaws

• Decent weight.
• Not the most best quality sound.
• Not the greatest battery life.

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.0

Price: from 2 300 rubles.

The Mi Collar Bluetooth Headset has a reinforced neckband, a comfortable flexible design and a nice price tag. The headphones support popular A2DP, AVRCP, AptX and AAC codecs and last eight hours on a single charge. Claimed battery life is 200 hours.

Advantages

• Adequate battery life.
• Support for A2DP, AVRCP, AptX, AAC codecs.
• Convenient design.
• Minimum weight.
• The presence of an LED.
• Relatively good music sound.

Flaws

• Very thin wires.
• Not the most durable build.

Plantronics BackBeat FIT

• Headset Format: stereo (earbuds)
• Wireless module version: Bluetooth 3.0

Price: from 4,700 rubles.

Our top could not do without a sports model. It may seem that this headset is outdated, since it uses far from the latest version of Bluetooth. But in fact, this is not so, because nothing prevented the creators from introducing support for AVRCP and A2DP technologies here. On the run or on the way to work, you will enjoy high-quality sound. At the same time, you will notice the approach of the car in time, since earbuds are used here as headphones, which do not hide external noise very much. You should not be afraid that they will fall out of your ears. Fixings are designed to exclude such a scenario. You can only complain about the time of work, which is only six hours of talk time.

Advantages

• Looks beautiful.
• Holds well on the head while running.
• Weighs only 24 grams.
• There is an LED.
• Some support modern technologies.
• Partial protection against dust and moisture.
• Quality sound.

Flaws

• Not very long run time.
• Inflated price tag.
• Not suitable for people with small ears.

Marshall Major II Bluetooth

• Headset Format: stereo (overlay cups)
• Wireless module version: no data

Price: from 4,577 rubles.

The headset for a smartphone does not have to be made in the form of "droplets" or inserts. It may well be the same as the Marshall Major II Bluetooth. In fact, these are those who, in combination, also know how to transmit the user's voice. This is one of the most advanced devices on the market, perfect for the music lover. Support for AptX makes the sound clear and deep - both bass and treble are felt well. But main feature is the working time. You can listen to music for thirty hours! And when the charge runs out, you can connect the cable and continue listening in wired mode. Some people may be put off by the price. But in fact, it is quite acceptable for dynamic headphones with many supported technologies.

Advantages

• Support for AptX, AVRCP and A2DP.
• Wireless and wired modes of operation.
• Quality ear pads and headband.
• The LED signals on and off.
• Good microphone.
• Very long battery life on a single charge.
• Well-executed management.
• Great sound.

Flaws

• Some can put pressure on the ears.
• No hard case included.

• Headset Format:
• Wireless module version: Bluetooth 4.1

Price: from 9 400 rubles.

The WH-CH700N headphones are large on-ear headphones. It uses a system of several microphones on different bowls for the active noise reduction function. As a result, you will not hear external sounds, even if nothing is currently playing through the headphones. The model is distinguished by a long operating time and high-quality sound. The perfect choice for fans of full-size models.

Advantages

• Support A2DP, AVRCP, AptX, AptX HD, AAC.
• 35 hours of work in active mode.
• 200 hours standby.
• Lightweight design at 240g
• Reliable headband.
• Active noise cancellation.
• There is a light indicator.
• Ability to use in wired mode.
• Very good sound.

Flaws

• Big and doesn't fit everywhere.
• There is no cover included.

Excluded from selection

Plantronics Marque 2 M165

• Headset Format: mono
• Wireless module version: Bluetooth 3.0

Price: from 2,500 rubles.

This mono headset may seem quite expensive. However, it is of very high quality. So much so that for some users the device remained in working condition even after being in washing machine! Also, the gadget is able to boast of two microphones, thanks to which a competent voice transmission is realized here, cleared of third-party noise. As for battery life, its duration is approximately 7 hours of talk time. This is a typical indicator for a mono headset, it is simply impossible to achieve something more while maintaining a mass of 7 grams.

Advantages

• The interlocutor hears clear sound, without the admixture of third-party noise;
• High reliability;
• Weight remained minimal;
• The presence of a light indicator;
• Ergonomic design;
• Compatible with any device.

Flaws

• Not the lowest cost
• There is no protection against dust and moisture.

Defender FreeMotion B61

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.0

Price: from 993 rubles.

Usually, wireless headsets from Russian manufacturers only annoy after purchase. But the same cannot be said about the Defender FreeMotion B615. Yes, the device turned out to be quite heavy - its weight reaches 108 grams. And if it weren’t for the very low cost, it definitely wouldn’t have made it into our rating. The headphones here give out average sound quality, and the battery life reaches only four to five hours of talk time. But on the other hand, there is a convenient control panel located on the wire connecting the two headphones. You won't find anything better for the money!

Advantages

• Support for A2DP, AVRCP and some other technologies;
• Good appearance;
• Minimum price tag;
• There is an LED;
• Convenient design;
• Can work with multiple devices at the same time.

Flaws

• Decent weight;
• The sound quality is not the best;
• The battery life could have been longer.

LG HBS-500

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.1

Price: from 3 390 rubles.

Externally, this gadget is very different from many other wireless headsets. The South Koreans provided their creation with an occipital bow. This made the device more reliable. It also gave the engineers a free hand, allowing them to add high-capacity batteries. With a weight of 29 grams, this headset can work in talk mode up to nine hours. One can only regret here the lack of support for serious sound enhancement technologies. But on the other hand, the cost of the device is by no means cosmic, which allows you to buy a bluetooth headset without any consequences for the budget.

Advantages

• Decent battery life;
• Convenient design;
• Not very heavy;
• Such a headset is difficult to lose;
• The presence of an LED;
• The presence of a vibration motor;
• The music sounds relatively good.

Flaws

• At telephone conversation may periodically "gurgle";
• Companion app not working well
• Very thin wires;
• It is not always possible to connect to a laptop.

LG HBS-910

• Headset Format: stereo (plugs)
• Wireless module version: Bluetooth 4.1

Price: from 7 990 rubles.

The flagship wireless headset from Electronics. The engineers tried to endow their creation with the support of the most different technologies, including A2DP and AVRCP. The headphones themselves are located on the occipital arch. This has two advantages: the device is difficult to lose and there was a place for a capacious battery on it. Talk time here reaches 16 hours. When listening to music, the duration of operation is reduced to 10 hours, but this is very good! The best Bluetooth headsets should work for a long time, and the LG HBS-910 is impossible to find fault with in this regard.

Advantages

• Convenient design;
• Support for some modern technologies;
• Long working time;
• Recharges in the traditional two hours;
• Attractive appearance;
• Quick connection to a smartphone;
• Well-implemented noise reduction;
• The music sounds very good.

Flaws

• Not everyone can afford;
• Sometimes there is a "gurgling sound" (during a conversation).

Sony MDR-ZX770BN

• Headset Format: stereo (full size cups)
• Wireless module version: Bluetooth 3.0

Price: from 8 499 rubles.

If you regularly have to ride the subway and visit other noisy places, then you need to take it seriously. The ideal choice would be earplugs that save from external noise. But if you don't like them, then you will have to spend money on the Sony MDR-ZX770BN. These are large over-ear headphones that use a multi-microphone system to implement active noise cancellation. As a result, you will not hear external sounds, even if nothing is currently playing through the headphones. Also, this model is able to boast of a long operating time and high-quality sound of music. Perfect copy for those who like to use over-ear headphones even on the street.

Advantages

Flaws

• Big sizes;
• There is no hard case included.