Router tp link entry into settings. How to enter the router settings - Web management interface. Login to the web interface

Any router is configured through a special web interface aimed at the ability to configure the Internet. How to enter the settings menu of the TP-Link router and will be discussed in the article.

TP-Link is a popular manufacturer of routers that has a wide variety of models to its credit, allowing you to provide a high-speed and stable Internet connection.

How to enter the settings menu of the TP-Link router?

Entering the settings menu of the TP-Link router is carried out in the same way as with a router of absolutely any manufacturer. To do this, you will need to launch any browser (but it is better if it is a standard Internet Explorer) and then you need to go to 192.168.1.1 or 192.168.0.1 (If you didn’t manage to go to one address, insert another one into the address bar).

An authorization window will appear on the screen to enter the router settings management menu. If you are setting up the router for the first time, then most likely you have standard data set - the word admin acts as a login and password (in fact, similar authorization data can be used by other manufacturers). To make sure of this, just in case, look at the bottom of your router - it should have a sticker that contains not only information about the router model, but also data for authorization in the web interface.

Actually, if the data was entered correctly, the next step you will see on the screen is the menu of your router, through which the Internet is configured. And if in terms of entering the web interface, almost all routers are the same, then when setting up, you must specify the unique data specified in your contract concluded with the provider.

If you still have questions related to entering the settings menu of the TP-Link router, ask them in the comments.

Most TP-Link devices have a web interface for changing or viewing device settings. The web interface can be used in operating rooms Windows systems, Macintosh or Unix using Microsoft Internet Explorer web browsers, Google Chrome, Mozilla Firefox or Apple Safari.

To access the web interface of any device, you will need to find the default login information. Each device may have its own login information. Turn the device over and you will see a sticker on the bottom of the device. On this sticker you can see the line " Default Access ; default settings ; Default Wireless Access"(Default login information).

For users who can't log in to the device's web interface TP - LINK , there are a number of solutions that they can perform. Please click on the required point below to solve the required task.

Device web interface TP - LINK is an embedded web server thatdoes not require internet connection , but requiresphysical connection between TP-Link deviceAnd device from which you want to log in to the web interface.

For wired routers and switches, you need to connect your computer to the LAN by cable and make sure that the corresponding LED indicator LAN is on fire.

Some devices TP - Link (For example, TL - WA 854 RE ) do not have a LAN port . In this case, you will need to connect your device to a wireless network ( TP-LINK_XXXXXX ) to access the web interface.

You will only be able to log into the web setup interface if IP -the address of your computer is on the same subnet as the device TP - LINK . Most of the devices TP - LINK has the feature enabled by default DHCP , which automatically assigns IP -addresses to your computers or devices. Managed switches and some access points ( TL - WA 901 ND V 1& V 2, TL - WA 801 ND V 1, TL - WA 701 ND V 1, TL - WA 730 RE V 1, TL - WA 830 RE V 1, TL - WA 5210 G , TL - WA 7210 N , TL - WA 7510 N ) do not support the function DHCP -server. In this case, you will need to configure IP -address for your computer/device manually to access the web interface.

For example, for devices TL- WA901 NDV1& V2, TL- WA801 NDV1, TL- WA701 NDV1, TL- WA730 REV1, TL- WA5210 G, TL- WA7510 NIP-default address is 192.168.1.254. Your computer will need to be set to static IP-address 192.168.1.Xto access the web utility. For devices TL- WA830 REV1 andTL- WA7210 NIP- default address - 192.168.0.254, for all managed switches IP-default address is 192.168.0.1, in this case IP-computer address must be 192.168.0. X.

2) Wrong web browser settings

Consider a few situations below:

A. We introduce 192.168.1.1 in the address bar and click Enter- the following window appears before us.

If you encounter this problem, you can clickConnect(Connect) or go to the tabfile(File) and uncheck the boxWork Offline(Work offline).

A router is a device that does not require constant monitoring by the user. Usually, after the initial setup of the router, you can forget about it for a long time. It will work according to settings and won't bother you.

However, sometimes it becomes necessary to go into the router settings. For example, in order to forward a port or . In this article, you can familiarize yourself with step by step instructions how to enter the settings of the TP-LINK router.

Step #1: Open any browser.

Access to the router settings is made through the so-called web interface. The web interface is a small site that is located directly on the router and provides the user with convenient access to all the parameters of the router.

You will need a browser to access this web interface. You can use any browser you are comfortable with. For example, Google Chrome, Mozilla Firefox, Opera or any other.

Step #2 Enter the IP address of your TP-LINK router into the address bar of your browser.

Step number 3. Enter the login and password from the router.

After you have entered the IP address of the router in the address bar of the browser, you should see a window for entering your login and password. After entering the login and password, the web interface of the router will open in front of you, and you can access the settings of the TP-LINK router.

At this stage, it may be difficult to enter a username and password. If you are entering the TP-LINK router settings for the first time, or you have not changed your login and password yet, then you need to enter the standard login and password. In most cases, the admin login is used on TP-LINK routers and admin password. If this data is not suitable, then you can look at the instructions from the router or the sticker on its bottom.

Since there is already a description of the steps to enter the settings of most common routers, even general instructions for entering the control panel, it makes sense not to ignore it by writing a separate briefing for high-quality and popular TP-Link devices.

We connect ourselves

A significant advantage of the devices of this company is that the process of gaining access to the control panel causes no more difficulties than on other routers, and is almost identical to any model of routers from this company (TL-WR841N, TL-WR741N, TL-WR940N, etc. .).

Do not be surprised that after buying a router to install it yourself, you need to enter the settings panel. Thanks to the article from this site, it is unlikely that there will be an opportunity to encounter difficulties in configuring routers. After all, despite the use of the services of a master when initial setup when you start using the router, you will probably need to make changes to some of them: changing the password for Wi-Fi, recovering a forgotten password I, firmware update. Constant appeal to the master will not add convenience, and the family budget will not save. After all, you can cope with everything on your own, and in case of difficulties, turn to the site for help.

Getting access to the TP-Link settings panel

To enter the settings, you must perform the following steps:

• Connect to WiFi router. This can be done either through wifi network or using a network cable. Although it is possible to enter the settings system through both a smartphone and a tablet, it is still recommended to use a laptop or PC.
• Using any web browser, depending on the type of router, go to one of the addresses: , or . You can see it on the bottom of the device.
• When prompted for a login and password, in both columns indicate " admin” or your own information, if you managed to change it.
• You have entered the settings panel.

Detailed description of connection to the device with illustrations

We use Wi-Fi, you can find a diagram of how to connect to it here, or a cable to connect to a router. As long as your device is barely purchased, the name of the wireless network should be generic. Something like "TP-LINK_0919".

Also, to connect to a router (to the yellow LAN slot) and to a laptop or PC, to a network adapter, you can use the cable included in the kit with the router, as shown in the photo below:

Then you need to launch a web browser of your choice on the PC. TP-Link has more than one IP option for entering the settings system, in the case of TP-LINK, to enter the control panel, you need to write in the address bar of the browser with a bunch of login and password admin | admin (by default, old models use addresses 192.168.1.1 or 192.168.0.1) . You can find it on a tag glued to the bottom of the device wall. This label displays IP, wildcard and login information. Knowing this information will be useful in the future.

Then we jump to the address entered in the web search engine. In the window that opens, enter the typical username and password - " admin". If the template data has been changed, then the current data must be entered. If you need to use a standardized password and username, for example, if you can't remember them, you may need to reset your router.

In this article I will tell you how you can do the initial configuration of Tp-link routers. The advantage of this company in terms of settings is that almost all Tp-link routers set up almost the same.

In addition, they have an intuitive port color scheme. And even an inexperienced user will not have to think about where to connect which cable.

We will configure the router in three stages:

1. Internet connection setup
2. Setting up Wi-Fi on the router

So let's get started.

Preparing the router for configuration

We turn on the router in the network. We connect the provider's cable to the blue port on the router.

If you do not have this cable, then you can connect to the router via Wi-fi from any device.

We launch any browser and go to the site 196.168.0.1

If this data is not suitable, then you can reset the settings on the router. To do this, press the Reset button and hold for 10 seconds. All indicators on the router should blink. After that, we wait about a minute until the router boots up and try to log in again.

Setting up an Internet connection on a Tp Link router

To set up a connection, we will need data from your provider. They should have been given to you when you connected. If these data are not available, then it will be necessary to call the support service and clarify how to obtain them. It will also be possible to clarify the protocol by which you connect to the Internet (PPPoE, PPtP, L2TP, etc.) We will configure PPPoE, since this is the most common protocol used to connect to the Internet.

• On the left menu, select the Network section (Netwotk)
• Next, select the protocol by which you are connecting (PPPoE, PPtp, L2Tp, etc.)
• We type the login and password issued by the provider (if you have a PPtP connection, then you still need to specify the server address)
• Secondary connection put an end to Dynamic IP
• WAN connection mode put a dot on Connect automatically
• Click the Save button and wait for the page to refresh.

After the page is refreshed, open a new tab. If you did everything right, then the Internet should already work. It remains to set up WiFi.

Setting up Wifi on a Tp Link router

Setting up Wifi is easy. If you have a dual-band router, then Wifi is configured separately for each 2.4GHz and 5GHz band!

• Select a section on the left Wireless network(Wireless)
• In the Network name (SSID) field, specify the name of the new WiFi networks with Latin letters
• Mode: 11bgn Mixed Channel: Auto
• Click Save. If the router offers to reboot, then it's too early.

Now set a password for the Wifi network:

• On the left, select the Wireless Security section
• We choose protection WPA / WPA2 - Personal or WPA-PSK / WPA2-PSK
• We select the version WPA2-PSK, and AES encryption
• Click Save

If the router offers to reboot the router (a red line appears), then we reboot. After the reboot, we check the WiFi connection, everything should work.

Happy using!