Install a program on your phone to configure a wired mouse. Connect the mouse to the Android smartphone. Using a mouse, keyboard or gamepad

Hello to all do-it-yourselfers, many who use a computer feel the superiority of a mouse and its convenience, but if you use a mouse on your phone, it’s also convenient, and if you have a keyboard, your phone turns into a mini PC, in this article I’ll tell you how to make a mouse for DIY phone using micro USB.

To my surprise, nowadays few people know that their phones have support for connecting third-party equipment. The idea came to mind to implement it, it won’t be that difficult. Almost everyone has a phone that supports OTG, which means we can use various devices With USB connection. Sold in markets USB adapters OTG, but using them for a device such as a mouse is inconvenient. That is why I decided to make a separate mouse for the phone; it is convenient when using the Internet, you can draw with the mouse and even play. Before making it, let’s make sure we have what we need; in order to assemble a miracle mouse for your phone with your own hands, we will need:
Wired computer mouse.
A micro USB plug from any charger, data cable, or purchased can be found in any radio store at a price of about 15-25 rubles.
Tools: soldering iron up to 40 watts, rosin, solder and hot glue.
The case for micro USB is the one that connects to the phone, sold complete with the plug itself.

Everything you need is assembled, you can get started.

The first step will be to disassemble the micro USB, taken from the unnecessary charger.

There are two solutions here, or rather, if you have a rubber micro USB case, then you need to cut it in half with a utility knife, but if it is plastic, then you need to unfasten two latches on each side of it, then you will have access to our plug.

The next step is to solder the plug; for this, the soldering iron tip must be ground down to a width of 1.5-2 mm, dipped hot in rosin and covered with solder, since everything in a micro USB is miniature. We solder it carefully, without touching the plastic part of the plug.

After unsoldering, you can start choosing a future telephone mouse; the choice fell on a mouse that had been lying around for a long time with broken wires at the end of the plug.

The mouse needs to be freed from old USB, we won’t need it; we’ll put micro USB in its place. We do this with a slight movement of a stationery knife.

Now all that remains is to assemble the electronics, we use the same thin-tipped soldering iron to tin the four wires from the mouse, we don’t need a wire screen, it’s the same pseudo-foil film.

After the wires are tinned, you can study the connection pinout.

The fact is that if you just solder all four wires from the mouse to the micro USB, then nothing will work, the black wire is responsible for the operating mode of the additional equipment, which needs to be connected to the opposite side, just turn the micro USB over and solder the jumper on both sides from wire.

The colors of the wires are not made in vain, the red wire is the power plus, the black is the minus, that is, the same ground, the green is the data power, plus, and the white is the data power, minus.

According to the pinout, we solder the wires from the mouse to the micro USB, everything is quite simple, the micro USB numbers are indicated in the photo (do not confuse the sides) and also, the main thing is not to close the wires together. This is what a soldered plug looks like from above and below.

In order for the mouse to look decent, you need to put everything into the case (homemade does not mean ugly), I was lucky in this, the case I got was plastic and collapsible, after gluing the whole thing a little with hot glue, we closed our micro USB.

Let the glue cool and check, everything works, when you connect the mouse, the phone notifies turning on USB device, and the laser glows on the mouse itself, and a black cursor with a white border appears on the screen. Using the mouse brought me a lot of pleasure, it’s convenient to use, I’m also glad that the wheel functions the same as on a computer, it creates the feeling of a mini computer, on the other hand, using the mouse on a phone is original. Good luck everyone

A mouse made from a phone is a very interesting and entertaining thing. It is very easy to implement this idea, and now I will tell you how to do it. You only need a couple of small programs for this.

So why is this convenient? Many people like to watch movies on the computer, away from the monitor. And such a mouse from your phone can be used to switch something remotely. This is especially convenient if you are located on a soft sofa or chair, where there are no hard surfaces for a regular wireless mouse. In addition, this device can be very conveniently used in small spaces - after all, with a regular mouse you need to move around a certain area on the table, and a mouse from a phone will allow you to control the computer cursor using only the screen space of the phone itself.

The mouse from the phone that will be discussed connects to the computer via Wi-Fi and controls the cursor using its touch screen. It can fully perform all the functions of a regular mouse, and even moreover, a keyboard. To implement this idea you need a phone number Android based or IOs, as well as a computer with a wi-fi device and an operating system Windows system, Mac, Ubuntu or Fedora of any bit size.

How to make a mouse from a phone

So, start by installing the application on your smartphone or tablet. Download what you need for your platform from . Installation occurs in the usual way.

There you can download the server for the mouse for your operating system. This is a miniature program for your computer that doesn't even require installation. You just need to download it to your computer and run it. After this, its icon will appear for about an hour. If necessary, by right-clicking on it, you can add the mouse server to autorun.

And with that, the mouse from the phone is almost ready. Now launch the application on your phone, and click on the desired computer with wi-fi detected nearby.

And that's it, the mouse is already working. An area will appear on the phone screen, like on laptop touch mice: it will mark the left and right buttons, a scroll button and an area for moving the cursor.

In addition, you can switch tabs and go, for example, to the keyboard. That is, the phone turns into a remote keyboard for the computer.

Many games for the operating room Android systems support joystick control. Agree, it’s much more convenient to play on it than on a touchscreen. Not everyone knows how to connect it to their device, so this issue needs to be considered.

You can also find out how to connect another headset to your Android tablet or smartphone:

How to connect a wired mouse or joystick via USB to an Android tablet or smartphone

In order to connect wired mouse or a gamepad to your smartphone or tablet running Android, you need to get a USB OTG adapter. For those who don't know, this is a special cable with a microUSB on one end and a hole for a full-size USB on the other. You need to insert the plug from the mouse or joystick wire into it.

If the manufacturer of your device was greedy on the microUSB connector, equipping the tablet or smartphone only with a proprietary synchronization connector, then you will have to buy an additional adapter suitable specifically for your connector. You will need to insert a USB OTG cable into it.

How to connect a wireless mouse or gamepad to a smartphone or tablet via Bluetooth

If you want to connect wireless headset, in the form of a mouse or gamepad, then simply make your peripheral device visible, turn on Bluetooth on Android, go to the Bluetooth settings and select what exactly you want to connect to.

If you have a wireless mouse with a radio interface, then you won’t be able to do without an OTG adapter. You will need to insert a USB receiver into it and turn on the mouse.

Any device running Android OS can work with a mouse. The main thing is that the device has USB port or in the absence of it (which rarely happens in some exotic devices), the module wireless communication Bluetooth. In this article we will look at how to connect a mouse to Android via a USB port using an OTG cable and a Bluetooth channel.

Connect the mouse to the Android smartphone via USB port

To connect a mouse to Android device via USB you will need, which can be purchased inexpensively in stores that sell smartphones, tablets and accessories for them. In some devices it is included in the sales kit. An OTG cable is an adapter between a standard USB connector and a microUSB connector used in mobile devices.

OTG cable

You can learn briefly about OTG connection technology. The only caveat is the presence OTG support connections on your device. In the previously published material “” you can find out how to check the presence of this technology in your smartphone or tablet.

Please note that if your phone has a new connector USB type Type C, then the cable must be of the same type. Please check this point when purchasing this accessory.

So, we have a cable, and now we connect the mouse to our Android device. Everything is simple here - we just connect one OTG connector of the “cord” to the device into the microUSB connector, and connect the mouse to the other connector. If you want to use a wireless mouse that operates on radio frequency, then connect the mouse transceiver to the cable.

Mouse radio module connected to the OTG cable

After connecting the mouse, the well-known cursor will appear on the display of your smartphone or tablet, with which you can control the gadget. No more settings are needed, everything will work immediately after connecting the mouse.

Do you have a Bluetooth mouse and don't want to see unnecessary wires on your tablet? Then connect it using the Bluetooth module included in the tablet.

Connecting a mouse via Bluetooth is also not difficult. If you've ever connected to another smartphone to transfer/receive photos or music, then the process should be familiar. First, you need to turn on the mouse and make sure that it is not paired with another device, then turn on Bluetooth on your smartphone, tablet, or other device.

Turning on Bluetooth on Android

Next, on the bottom of the Bluetooth mouse (the side with which it is moved along the surface), click on the pairing button, usually it is marked in blue. Less commonly, this button may be located on the side or even on top.

Bluetooth mouse pairing button

After enabling pairing on the mouse, the Android device should detect the “rodent”. Briefly touch its name to complete the process of connecting the mouse via Bluetooth, and after that a control cursor will appear on the screen.

As you can see, there is nothing complicated about connecting a mouse to Android.

One of the advantages tablet computer the fact that it does not require additional equipment, is always ready for work, because control is carried out via a touch screen. However, sometimes there may be a need to additional devices- for example, a mouse. In this case, it will be useful for the owner of the gadget to learn how to connect a mouse to the tablet in order to further expand the functionality of the device. In fact, there should not be any special problems with this procedure.

Features of mice

A mouse (information input device) is a special input device that can be used to control the cursor and assign various tasks to the computer. Everyone is probably familiar with the principle of operation of a mouse - control is carried out while moving the device along a horizontal surface. Each element (buttons, wheel, etc.) performs its own function.

As for the types of computer mice, based on the type of connection, two main types can be distinguished - wireless and wired. With wired manipulators, everything is relatively simple - they connect to any tablet using a special cable (via USB or OTG adapter).

With classification wireless devices it is already more complicated, although the connection process only seems difficult - in fact there is nothing complicated. You can connect them to the tablet using Bluetooth or Wi-Fi, without an adapter or other equipment. In this case, no cables are required, just take care of the correct connection. We can highlight the strengths and weaknesses of using an information input device:

Advantages:

• Low cost;
• Easy controls;
• Ability to perform a large number of manipulations;
• Prolonged work does not cause discomfort or fatigue.

Flaws:

• To work with the mouse, you need a smooth and even surface of sufficient size;
• There is a lack of resistance to vibration.

Wired connection

A wired USB mouse, as mentioned earlier, is connected to an Android tablet using a cable. In this case, the whole difficulty lies in the fact that most tablets are not equipped with a full USB input. As a rule, manufacturers equip them with microUSB. To begin with, it is recommended to carefully examine your device for the required input, and if it turns out that USB is still present, then you just need to connect the mouse (and keyboard) and use it for your pleasure.

If you still have a standard microUSB input, then to connect the mouse you will have to get a special adapter - OTG. It often comes bundled with a tablet device, but even if it is absent, you won’t have to spend a lot of money on purchasing an adapter. You can buy it at any specialized store. This cable has a USB input on one side and a microUSB input on the other. All that remains is to connect the mouse and you can work with it. It is worth noting that with tablets Windows situation it's exactly the same.

Wireless connection

You can connect a Bluetooth wireless mouse to your tablet very quickly and easily. It works like any other Bluetooth device without wires. All that is required is the information input device itself and the gadget:

1. The first step is to turn on the Bluetooth function on the tablet and start the mouse. Very often the mouse does not work initially (factory defect, etc.), so if it does not light up (manipulators are equipped with special sensors), it is worth checking the device on the computer.
2. You should open the device settings, section wireless connections and activate the visibility option so that only connected devices recognize the tablet.
3. After this, the system will start searching for devices. If a mouse appears in the visibility range, you should select its name from the list. This will open a window for you to enter special code connections (in most cases this is the standard combination - 0000).
4. All you have to do is enter the code correctly, and after a couple of seconds a small arrow will appear on the device screen. This means that everything is done correctly and the mouse can be used.

Another way to connect a wireless mouse is based on Wi-Fi technology. It is considered more complex and time-consuming, but still possible. How to connect a mouse correctly? For use this method Certain conditions must be met, otherwise the mouse will not work at all, or incorrectly:

1. If the Wi-Fi function in a tablet is considered standard, then an input device with a built-in Wi-Fi radio module is not so easy to find. However, this is one of the main conditions.
2. For normal operation of the mouse, no additional network equipment should be required.
3. When combining a tablet and a mouse into one network, it is important that the parameters of their network masks completely match, and the IP addresses only partially match.
4. PC mouse, connected to the device, must process commands independently and also send them to the tablet in the appropriate form.

So, is it possible to connect a mouse to a tablet using Wi-Fi technology? Definitely yes, but this method is complicated by numerous factors and, therefore, is used extremely rarely. This type of connection is often used to connect other peripheral devices(printers, scanners).

Conclusion

Working on a tablet with a computer mouse can be much more convenient and faster. In particular, this applies if the sensor does not work, and alternative way there is no control. It all depends on the purpose for which the user needs the gadget. The options described above for connecting a mouse to a gadget should not cause any difficulties - everything is extremely simple and clear. Each instruction contains a sequential description of all actions.