Correct configuration of the ASUS RT-G32 Wi-Fi router. Instructions for setting up wireless routers Asus RT-G32 C1, RT-NXX The computer does not see the asus rt g32

ASUS is a well-established manufacturer of electronics with good performance, including modems for Internet access. But any device of this type must be configured to the parameters of the provider with whom the contract for the provision of communication services has been concluded.

This instruction will give you the answer to the question of how to configure the asus rt g32 router, while it is worth remembering that the configuration algorithm and interface of devices from the same supplier are very similar, so the article will be useful to all buyers of ASUS modems with Wi-Fi support.

Preparing for setup

Technical preparation of the router for configuration is carried out in several stages:

1. Connect the power supply to the Asus rt-g32 and turn it on.
2. Connect the Ethernet cable provided by your provider to the modem connector labeled “WAN”.
3. Connect the router port labeled “LAN1” to the computer’s network card using an Ethernet cable, which is included in the Wi-Fi modem kit.
4. Reset the Asus RT g32 to factory settings by pressing and holding the “Reset” button recessed in the case for ten seconds.

Computer settings

Often characteristics network card computers may be manually configured for other connections. To work with the Asus RT g32 Wi-Fi router, you need to configure the card:

1. Open the section network settings OS. For example, for Windows 7 you need to open the settings window shown in the following figure (located in the control panel), where you click on the highlighted link.

2. Go to the connection properties by right-clicking on its icon and selecting the appropriate item in the menu that appears.

3. Open “Properties” of the item indicated in the following figure:

4. Set the protocol characteristics as shown in the figure:

We repeat the procedure for the remaining connections, if any.

Setting up the router

To configure the Asus RT-g32 according to the settings of your provider, follow the steps of the following instructions:
1. Launch any browser, enter the address 192.168.1.1 and go to it.
2. In the loading authorization dialog, enter “admin” in both fields and click on “Submit”

3. Click on the “Go to Home Page” button

4. The software shell of the Asus RT g32 Wi-Fi router supports Russian, select it in the “Language” field.

5. To configure access options global network Click on the main menu item “WAN”.
6. Find out your connection type from your telecom operator.

7. If the provider provides the Internet using dynamic IP technology, then nothing needs to be changed on the “WAN” page. Click on the "Accept" button.
8. If the Internet is provided using static IP technology, then in the “WAN connection type” item, select the appropriate type and fill in all the form fields with the data received from the provider and click on “Accept”.

9. When selecting the PPPoE connection type, specify receiving an IP address automatically or fill in the address field if it was provided by your Internet provider. Z Fill in the fields in the “Account and connection settings” section with the data specified in the contract for the provision of communication services, and in the MTU field enter the value 1472 and click on “Accept”.

11. Apply the changes and configure the wifi module for wireless connection. If this option is not needed, reboot the modem and use the Internet.

Wi-Fi setup

To configure the characteristics of wireless access to the global network, open the “Wireless Network” tab of the main menu. Where you will set the following parameters:

1. In the “SSID” field, enter the name of the Wi-Fi network displayed on subscriber devices. It can be arbitrary, but must consist only of numbers, symbols and letters of the Latin alphabet.
2. Enable the “Hide SSID” option if you want to use this method of protecting your wifi networks from unauthorized access. When activated, the setting hides your network from subscribers, and you can connect to it only by knowing its exact name.
3. In the “Authentication Method” line, set “WPA-Personal”. And in the “WPA encryption” line, select “TKIP”. These are the most well-established and widely used methods of network security.
4. The “WPA Pre-Shared Key” line contains the password that users must enter when logging into your wifi network. The length of the code combination must be at least eight characters; any characters can be used.
5. To fix the settings, click “Apply”.

This completes the setup of the Asus RT g32, all that remains is to reboot it and use the Internet as usual wired interface, and via Wi-Fi.

Found a typo? Select the text and press Ctrl + Enter

A router is an indispensable thing in an office, apartment, or even a cafe. With the help of a router, or router, it has become possible to use the Internet and exchange data between computers and gadgets connected to it. The task of such devices is to connect to the Internet provider line and convert signals for transmission in both directions.

Description of the ASUS RT-G32 router: appearance, characteristics

Routers according to the method of data transmission are:

• wired, where an Ethernet cable is required to connect devices;
• wireless, where devices are connected either via an Ethernet cable or using Wi-Fi technology.

ASUS RT-G32 belongs to the category of wireless routers, has additional security features and supports the ability to create a secure Wi-Fi connections by simply pressing one button. The router comes with: power supply, Ethernet cable, brief instructions, warranty card, disk with software and complete guidance.

List of items included in the kit: power supply, router, disk with materials, user manual, Ethernet cable, warranty card

For those who get lost in the names of router and router. Router - translation of the English word router.

Appearance

The router has a modern design that allows you to install the device on a flat surface or mount it on a wall. The ASUS RT-G32 model comes only in white.

The ASUS company logo is located on top panel router, where the ventilation holes are also located. On the front panel of the router there are indicator lights for power (PWR), wireless network (WLAN), wide area network (WAN), and local network(LAN) in the amount of four pieces. Rear end equipped with an antenna, a button to start a protected Wi-Fi connection (WPS), a reset button to default settings (Reset), connectors for connecting network devices (LAN1-LAN4) and a modem (WAN) and a connector for the power supply (Power). The bottom panel has feet made of non-slip material, a sticker with some information, holes for ventilation and mounting loops for mounting the router on the wall.

WAN (Wide Area Network) - global computer network, or hot water supply, covers large areas and is designed for an unlimited number of users.

LAN (Local Area Network) - a local area network, or LAN, covers a relatively small group of buildings and, as a rule, has access to the global network.

WLAN (Wireless Local Area Network, or Wireless LAN) - a local area network operating using wireless technologies. Wireless literally translates as wireless.

Wi-Fi is a wireless local network technology that has become most widespread.

WPS (Wi-Fi Protected Setup) is a protocol for creating a wireless network using Wi-Fi technology. The protocol was developed to assist a user who does not have sufficient knowledge in the field of wireless network security and encounters difficulties when setting up a Wi-Fi connection. WPS assigns a network name and sets encryption for added security automatic mode, so the user does not need to manually set parameters.

Photo gallery: appearance of the ASUS RT-G32 router

The device has a modern design and comes exclusively in white. On the front panel there are the following indicators: power, wireless network, global network and four local network indicators. On the back panel there is an antenna, WPS and Reset buttons, as well as connectors for connecting the router to network devices and power supply. The bottom panel has holes for ventilation and mounting loops.

Characteristics

The main technical characteristics of the router are related to the available network operating modes and the quality of signal distribution. It is these characteristics that primarily determine the capabilities and scope of application of the router.

The ASUS RT-G32 router can operate in three modes:

• wireless router is the main operating mode of each router. In this mode, it distributes IP addresses between connected devices, opens access to network printers and file storages;
• repeater mode - a method that allows you to amplify the signal from the main Wi-Fi device;
• access point mode. The operating principle of this mode is to convert a wired signal into a wireless one.

Key parameters and features of the router:

• number of external antennas: one;
• dimensions: 110x167x33 mm, excluding antenna height;
• weight: 198.2 g;
• Frequency range: 2.4–2.5 GHz;
• Supported WLAN security protocols: WEP, WPA-PSK, WPA2-PSK and SSID function;
• management of the following number of network protocols: UPnP, DHCP, DNS Proxy, NTP Client, DDNS, Port Trigger, Virtual Server, Virtual DMZ, VPN Pass-Through;
• control and filtering of network traffic through firewalls: NAT, IP and Mac address filter, URL based filter;
• available WLAN operating modes: 802.11b, 802.11g, 802.11n;
• fast Wi-Fi setup connections via WPS;
• speed wireless communication: up to 150 Mbps.

Connecting and preparing to configure the ASUS RT-G32 router

Since the ASUS RT-G32 model belongs to wireless devices, then the router can operate in two modes: wired, where a special cable is required to establish a connection, and wireless, for which the connected device must have a WLAN adapter.

An Ethernet cable, which enables a wired connection, is supplied with the router.

To establish a wired connection, do the following:

1. Use an Ethernet cable to connect the modem to the WAN port of the router. The WAN port connector is blue and is located on the back panel of the router.
2. Connect the PC to the LAN port of the router with another Etherner cable. The LAN port connector is also located on the rear panel, but is colored yellow.

Connecting a PC to the Asus RT-G32 router

Setting up a wireless connection

Establishing a Wi-Fi connection requires the computer to have a WLAN adapter.

A WLAN adapter is a special module that makes it possible to connect to a LAN or WAN without a cable connection. First of all wireless adapters differ in connection interface. The adapter is installed in the PC case or uses the USB interface for connection. In addition, devices for this purpose differ in: network speed, communication standards, Wi-Fi network protocols, number of antennas, and others.

As a rule, laptops, netbooks and 2-in-1 devices come with a built-in WLAN adapter. Desktop computers most often do not have such a built-in device.

If you need to purchase a WLAN adapter, but you don’t want to bother connecting it, then I recommend choosing from devices with an interface USB connections. Such adapters plug into a USB port and do not require additional intervention in the computer case.

For installation wireless connection need to:

1. Turn off your router and modem.
2. Using an Etherner cable, connect the WAN port of the router to the modem. The WAN port connector is located on the back panel of the router and is colored blue.
3. If the connected device does not have a WLAN adapter, then you need to install it. How to do this, see the instructions for the adapter.
4. IN available Wi-Fi networks, find a connection named “default” and connect to it.

Connecting a PC with a WLAN adapter to the router

The default SSID of the router is “default”, encryption is disabled, and an open authentication system is used.

Configuring automatic acquisition of a network address in Windows

The instructions are described using Windows 7 as an example, you must do the following:

1. On the taskbar, which is located in the lower right corner of the screen, click on the network icon and left-click to select “Network and Sharing Center” shared access" The network icon for a wired connection looks like a monitor image.

   Select “Network and Sharing Center”

   The wireless network icon looks like an ascending graph.

   If the signal strength is good, the network icon will be white

2. In the menu on the left, click “Change adapter settings.”

   Select “Change adapter settings” in the “Network and Sharing Center” window

3. Select the desired network card. If you intend to use a wired connection, then the network card will be designated as “Local Area Connection”, otherwise – “Wireless Network”. Right-click on the network card and select “Properties” from the menu that appears.

   Select “Properties” in the menu of available actions

4. Click on TCP/IPv4 and click the “Properties” button.

   Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”

   5. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically.”

   Select the items “Obtain an IP address automatically” and “Obtain a DNS server address automatically”

   6. Click "OK".

Video: Setting up to automatically obtain an IP address in Windows

Login to settings: IP address, default login and password

To log into the router's web interface you need:

1. Open any browser.
2. Enter 192.168.1.1 in the address bar and press Enter.
3. In the window that appears, enter “admin” in the username and password fields.
4. Click "Submit".

To login, enter the default username and password and click “Submit”

If you follow all the above recommendations, the browser will redirect you to the router settings page.

The router's web interface is simple and convenient

During use, the interface developed for the RT-G32 router did not cause me any difficulties. The design is memorable and pleasing to the eye. The structure of the web interface is worked out to the smallest detail and ensures the efficiency of the user interaction process. I was able to understand the settings without much difficulty also due to the ability to easily change the interface language. This feature is located at the top of the page, so there is no need to search for it in menu items, as is the case in many applications. For me, it is important to have an assistant, whose icon is located in the upper right corner of the screen. The assistant's function is to promptly notify the user about errors in the program. Moreover, the assistant informs you about the interface capabilities and available functions. This assistant, in my opinion, is very useful for inexperienced users.

Changing the password to enter settings

To enter a new password to access the router settings, you must:

ASUS RT-G32 router settings

The RT-G32 router supports several operating modes for the global network. Available types of WAN connections:

• L2TP (Layer 2 Tunneling Protocol) - tunnel network protocol, designed to support virtual private networks and allow the organization of such networks with specified priorities. Does not contain data security or authentication mechanisms.
• PPPoE (Point-to-point protocol over Ethernet) is a channel network protocol that performs user authentication, compresses data and encrypts it. The main advantage of such a connection is the organization of the operation of each connection in its own channel, i.e. separately.
• PPTP (Point-to-Point Tunneling Protocol) is a point-to-point tunnel protocol that establishes a secure connection with a server by using a special tunnel. PPTP is used to organize local networks and ensures secure data transfer from user to user. User authentication can be carried out through different mechanisms, the most common being MSCHAPv2 and EAP-TLS.
• static IP address. It is assigned to a specific subscriber and remains unchanged during repeated Internet connections. Only your provider can allocate a permanent IP address. The service is often paid, since the number of IP addresses is limited.

Setting up an L2TP connection

To use the L2TP network protocol you need to do the following:

Setting up a PPPoE connection

To use the PPPoE protocol:

Setting up PPTP

Setting up PPTP requires the following steps:

Setting up a static IP

If your Internet provider provides a “Static IP” connection and you want to use it, then you should:

Wireless Internet is very convenient because it is mobile, which cannot be said about a wired connection. To set up a Wi-Fi connection you will need:

Don't be lazy to come up with good password for your Wi-Fi connection, otherwise you risk “giving away” your Internet for free to particularly cunning neighbors. To avoid hacking, I recommend using a combination of lower and upper case letters with the addition of numbers. For example: "LasT19Day05".

In the Wi-Fi connection settings, the manufacturer offers the function of hiding its name. This will provide additional protection against hacking, however, you will not be able to find the network in the list of available ones. You will have to enter not only the password when connecting, but also the SSID manually. On each device, this will only need to be done once, the first time you connect. If you want to use the above function, then indicate “Yes” in the “Hide SSID” field.

Setting up IPTV

IPTV is a type of Internet television that uses high-speed broadband broadcasting to broadcast TV channels. The IPTV function will only be available with an active Internet connection.

To connect IPTV you need:

After this, you need to return to the WAN settings page, in the “Select IPTV STB port” line, select the port to use and click “Apply”. Leave the “WAN connection type” field empty.

Leave the “WAN connection type” field empty, in the “Select IPTV STB port” field, select the desired port and click the “Apply” button

Local LAN and DHCP

LAN, or LAN is a local network. DHCP is a LAN protocol responsible for its configuration. Let's look at what needs to be done to set up a LAN in the ASUS RT-G32 router:

Setting up ASUS RT-G32 in repeater mode

A repeater is a device designed to increase the range of a wireless network. In what cases is this necessary? If the Wi-Fi network receives poorly or does not receive at all in some individual rooms.

The ASUS RT-G32 router can serve as a repeater, as it supports a similar mode. In the router settings, this operating mode is called “Repeater Mode”. To use it you need:

Factory reset

Resetting to default values ​​can be done in two ways: a button on the router itself and a button on the web interface.

Resetting settings with the “Reset” button

Initially, you should make sure that the router is connected to the power supply, and the power supply is plugged into the outlet.

On the back of the router there is a recessed button labeled “Reset”. Press it with a pointed object for three seconds or more. Settings have been reset.

Resetting settings via the web interface

The router's web interface not only performs a reset, but also allows you to pre-save configurations into a separate file, which can then be loaded to restore user settings.

If you are going to reset your settings for the first time and have never saved them before, I recommend saving them. This will make your life easier because you won't have to waste time and effort re-configuring your router from scratch.

To restore, save and load settings you need:

If you already have saved settings, or you simply do not want to save them, then skip the third step. And if there is no need to load the settings, then stop at the fourth step.

Updating the firmware of the ASUS RT-G32 router

The manufacturer described the process of updating the router firmware step by step in the “Administration” menu item on the “Firmware Update” tab. Check for the latest firmware on the ASUS website and follow the instructions:

Video: connecting, setting up and flashing Wi-Fi router ASUS RT-G32

How to reboot the router

Typically, there is a power button on the back of such devices that allows you to turn off the router without disconnecting it from the power supply. However, in this model this method is not available due to the absence of such a button. Therefore, ASUS RT-G32 users can only use the web interface:

One of the most popular router models, which does not lose its popularity despite its age. The favorable balance of adequate price, stability of operation and ease of setup has made the new product a popular solution not only for private use, but also in the modern practice of various Internet providers and mobile operators.

Despite its rather “respectable” age (having appeared on the world market over 6 years ago), the model still retains wide popularity as a real giant in the budget router market. The model remains one of the bestsellers among many leading providers and cellular operators. This approach is quite logical, given the fairly good characteristics for its price segment.

The device is used to operate standard frequency 2.4 GHz, it is recommended to select the freest communication channel. To ensure the security of data exchange, today's current encryption methods are used, with a nominal wireless signal speed of 150 Mbit/s.

Let's move on to connecting our router

Let's look at the basic connection method using an Ethernet cable. In this case:

• Place your router in a safe place, near an outlet. We connect the power adapter with the plug into the router connector, and the “plug” into the outlet.
• We connect the Internet cable - after this the router indicators should light up.
• We connect the router to the computer using the included device.

If this router was already in use before the installation, you should reset its settings to factory settings. To do this, use some thin straight object by pressing the Reset button - a needle, straightened paperclip, stick and other objects are quite suitable. We hold the button pressed for 10–15 seconds, after which you will notice that the router itself has rebooted.

Most router firmware supports a colorful menu in Russian. To launch it, make sure that the router is connected to a computer or laptop, then enter 192.168.1.1 in the address bar of any browser. To enter the menu, enter the login and password admin in both fields.

In the interface that opens, go to the WAN section of the side menu. To enter the appropriate data here, you should first find out about the connection method provided by the provider - it and other connection information are indicated in the contract. Also, if you wish, you can always contact technical support your provider and clarify this issue.

You should immediately take into account that the vast majority of domestic providers rely on connecting using the PPPoE method. Therefore, in the “Connection type” line, you must specify PPPoE by entering the login and password that the provider provided for the user’s connection.

Beeline setup

To connect to Beeline, a connection using the L2TP method is usually provided. Therefore, we set this option in the “Connection type” window, and you need to specify tp.internet.beeline.ru as the VPN address.

Setting up iptv

To do this, go to “Advanced settings” in the WAN section. Here we select the appropriate port to which the set-top box is connected, set a dynamic IP address.

After completing all these procedures, do not forget to save your changes. To do this, use the button at the bottom of the page. After making changes to the operation of the router, it will automatically reboot, and the new parameters will take effect from the moment it is restarted.

This usually completes the process of setting up and connecting the router. All that remains is to wish you to enjoy a stable Internet connection without unexpected failures. You can always find all other information on the nuances of setup and correct operation on the pages of our portal.

Today everyone has a smartphone, tablet or laptop. These devices traditionally connect to the Internet via WiFi. They are designed to solve the problem of distributing access inside an apartment or office wireless routers.
ASUS RT G32 router is a popular model among users

Traditionally considered most suitable for use at home or in small offices. They provide stable communications and work with any providers present on the Russian market. provided an affordable price combined with reliable connection quality. ASUS setup RT G32 WiFi is lightweight, but novice users cannot always cope with it. Let's look at how to configure the ASUS RT G32 Beeline router.

One of the largest providers, Beeline, uses an L2TP connection to authorize the network, and this causes minor difficulties for users.

Here are the steps to install the router:

1. Preparatory, including download and installation new firmware and checking the network connection configuration.
2. Direct connection to the router and firmware.
3. Create a connection to the network.
4. Setting up a Wi-Fi network.

WATCH THE VIDEO

Preparation

The first step is to download the latest firmware from the ASUS website. Go to the device model page through the “Products” menu and select the “Support” link at the top, and then click on the “Download” item. In the software section a new version presented with number 7.0.1.26. To download, select the “Global” link and save the resulting file.

1. Run the command “ncpa.cpl” from the window.
2. Select the local network connection you are using and call its properties.
3. Let's move on to changing parameters for TCP/IP 4.
4. Set both switches to auto mode.

• router;
• power unit;
• documentation and cable for connecting to a PC.

Let's consider how to connect WiFi router ASUS RT G32 to computer. The router has 5 ports on the back panel. One of them is signed by WAN, a cable installed by the provider’s specialists is connected to it. 4 LAN ports are designed to connect a PC and other devices, one of them is connected to a computer. We connect the network adapter for the ASUS router to the electrical network.

One of them is signed by WAN, a cable installed by the provider’s specialists is connected to it.

Important! You should not establish an Internet connection on your PC, either during setup or after. The connection will be established by the router.