Setting up lnb tricolor tv main. Tricolor TV module CI, CAM – purchase, connection and configuration. Brief instructions for setting up the "tricolor TV" or "NTV plus" module itself on lg TVs

The standard connection diagram for Tricolor satellite television is as follows: satellite dish - receiver (receiver) - TV. If you have a modern TV model, then this chain can be simplified: instead of a separate TV set-top box, use a CAM module. What it is, how it works, how to connect and how to configure the Ci “Tricolor TV” module, we will consider further.

What is a CAM module?

A CAM module, or conditional access module, is a special device that is inserted into the Ci or Ci+ slot in a TV equipped with a built-in DVB-S2 receiver. The module's task is only to decode the provider's paid channels using a smart card with a chip and a unique individual number. The satellite signal is processed by the TV itself.

How does the Tricolor TV CI module work?

How the Tricolor TV Ci module works can be described as follows: it decodes the received signal and then transmits it in decrypted form to the receiver built into the TV. The previously encrypted channels of the Tricolor TV operator become available for viewing. When using the module, it is important to monitor updates software the TV itself, because The signal is processed by the DVB-S2 tuner built into the TV. If access to channels is terminated (the channels are encrypted), and the module and smart card are not damaged, then you need to configure the TV itself.

What types of Tricolor TV CAM modules are there?

Custom CAM modules for viewing Tricolor TV are produced in only one format: single-system, single-channel. They are easy to set up and operate and provide access in the DRE-crypt encoding system on a single TV. Universal multi-channel modules, with which you can watch several channels simultaneously on different devices, are too difficult to set up and require special expensive equipment for operation.

Single system option

Universal option

Universal modules are capable of supporting several channel coding systems and broadcasting different channels to subscribers on the television network. You will watch the channels of the operator whose smart card you purchased and inserted into the module. But to operate such devices, you need special expensive television stations and complex programming and configuration of equipment. For this reason, universal modules are used only when connecting a large number of subscribers, for example, in apartment buildings.

The advantages of such equipment

The significant advantages of using the CAM module include the following:
— the absence of a second remote control for the TV tuner, as well as the TV tuner itself as a separate element;
— the satellite dish is connected directly to the TV, which eliminates unnecessary wires and improves the quality of broadcasting;
- higher image quality - the ability to view channels in both SD and HD formats, as well as in the new ultra-high quality - Ultra HD 4K (UHD).

How to configure the Ci “Tricolor” module on a TV?

Module "Tricolor TV" Ci: how to connect and configure? This procedure is quite simple. To connect the Tricolor TV conditional access module, first you need to make sure that your TV is equipped with a Ci-slot, purchase a CAM module and a smart card. To connect the Tricolor TV Ci module, you need to insert a module with a smart card installed in it into a special port on the TV. This must be done with the TV turned off.
Now let’s figure out how to set up the Ci+ “Tricolor” module on your TV.
After turning on the TV, information about identifying the module and the Tricolor TV smart card should appear on the screen: “Attention, access rights are being checked.” If the check does not occur, then go to the Ci module settings and click on the “Reset to factory settings” button. The TV will reboot. When the module is identified, a green light will appear on it. After this you need to configure the channels. In many modern TVs(especially Samsung and LG) channel settings are carried out in automatic mode when choosing the operator "Tricolor TV". If your TV does not support this mode, then you need to manually enter the parameters: type of antenna, satellite, converter. If you managed to do all this, then move on to setting up channels in the corresponding section of the menu. Request channel search frequencies in advance from Tricolor TV technical support or look on the Internet. After you finish setting up the channels, leave the TV on the “Russia-1” channel until the programs are activated (from a few minutes to 8 hours).

How to update the CI module "Tricolor" TV?

For continuous display of channels and correct operation of the Tricolor TV Ci module, it is necessary to promptly update: the software of the TV and the module itself.
If the TV is connected to the Internet, set the settings to " Automatic update Software”, then it will happen automatically. If it is not possible to connect your TV to the Internet, then follow the updates yourself on the manufacturer’s website, download to a USB flash drive and update according to the instructions via the USB connector.
The module software is updated via satellite. All you need to do is turn on channel number 333 “Telemaster”, which will offer to update to the latest version, and click the “OK” button. After installing the update, the module should automatically reboot. If this does not happen, you need to turn off the TV, remove the adapter from the slot and put it back, then turn on the TV. If for some reason you were unable to update automatically, you can download instructions on the Tricolor website that describe how to update the Tricolor TV Ci module yourself by downloading files with the latest version of the software to a USB drive. If nothing works, you can contact the Tricolor TV support service or call a wizard to configure the module.

Setting up and connecting the Cam module
Tricolor TV

Currently, some modern TV sets are equipped with an integrated satellite tuner and a connector for a Cam module, which allows you to view TV channels from satellite operators. To view channels from the satellite operator Tricolor TV, it is better that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow your company to view programs as in highest quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Instructions on what it really is, how to set up satellite Setting up satellite TV on Tricolor TV. How to set satellite influence on channels on lg tv. Cam-module Tricolor TV;
4.5. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Don’t know how to set up Smart TV on Samsung TV» How to set up Smart TV. Radial polarization converter;
5. Correct setting Tricolor on Samsung TVs Tricolor on how to configure the module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV to as in the screenshot (10750. How to reset the settings on Samsung Galaxy S8 and S8. RG-6 cable (or analogue) for connection satellite dish with telecom
Next, you need to install and configure the satellite antenna for the broadcast programs of the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and, using a television cable and F-connectors, connect it to the plug on your TV marked “SATTELITE”.

Tune

A satellite dish is an option without the help of others, but for high-quality broadcasting it is better to turn to specialists.

Next setup work

Cam-module Tricolor

We produce TV specifically with telecom:
1. Insert the smart card into the Cam module using full program(corresponding to the annotations on the sticker);

Module

CI on TV

Samsung

Process setting satellite channels Tricolor TV on Ultra HD brand Samsung. online store: .

Read also

How to remove applications from Smart TV LG, SamsungSmart TV is designed for the use of various integrated ones, as well as installation by the user required applications, also web access for TV. Smart TV provides a lot of necessary capabilities and...




How to delete an Instagram page if you forgot your password: and mail, via phone and computer Deleting Instagram if you forgot your password is a problem caused by various reasons. A person decides to delete a page due to lack of...




The computer does not see the network Several times I came across a problem in the comments that said that when setting up local network through wifi router there were problems when the computer was under Windows control 7 did not see the computer in Windows XP. There...




An extraordinary true story, an average Netflix movie. Yeh ballet release date. Friday on Netflix Written and directed by Sonia Taraporevala Julian Sands, Jim Sarbh, part of the cast of Yeh Ballet Manish Chauhan as Nishu in Yeh Ballet In the late 20s...




How to install canon printer lbp 1120 on OS 10 x64 Download driver Canon LBP 1120 x32 (x64). Irkzus blog on IT abilities. equipment repair, website setup, SEO You can’t find official drivers for OS x64, it was easier for us at the workplace and...




Months ago, it was reported that older iPhones with low-capacity batteries were slowing down. Apple eventually confirmed that it was slowing down older iPhones that have naturally degraded batteries. The company took a lot of cotton for this...

Why you can't auto-tune

Tricolor channels

TV on Samsung TV

Manual setting TV Samsung to satellite Tricolor TV. How to set up WiFi (Wi-Fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an LG TV. We configure it in such a way that it would be federal.
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off.
3. How to set up Smart TV on a Samsung, Lg, Philips, Sony, Saturn TV. Connecting a Samsung TV to the Internet using a network cable, wireless WiFi connections, WPS, Plug & Access systems. Using the remote control, you need to reset the TV settings to factory settings. For this

press the button

. “menu” and select:. "support". "self-diagnosis". “reset”, press the “OK” button, after which the TV will reboot;
4. How to set up a Samsung TV to receive channels. How to adjust sound on Settings digital channels on lg TVs. digital channels. After the reboot is complete

press the button

5. In the “channel” menu, go down to the submenu “ satellite system" and click "OK";
6. A window will appear asking for a PIN code, where we enter the values. 0000 (default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation. Eutelsat W4/W7 36E (if you cannot uncheck the marked satellites: remove the module from the TV and reset the TV settings again);
7. How to increase Asus Eee PC? Replace its native module random access memory 512MB by 1GB. Go to the “satellite selection” menu and select a satellite. Eutelsat W4/W7 36E.

Read also

Headphones from mobile phone are found in each of us. Usually, such an ordinary, but so necessary device migrates between the pockets of jeans, a jacket and a bag, so it quickly burns out and needs to be replaced. Don't rush to take it out...




Come up with the best one gaming monitor for 150 dollars? Your gaming experience largely depends on the monitor you choose. Along with the right pair of speakers, you need to enjoy an incredibly immersive gaming experience, provided you have a good...




How to enter the boot menu on my laptop and computer? Do you want to boot your computer from a USB drive or disk? For this purpose you do not need to log in BIOS settings. Especially if you don't know much about it. Ultimately, of course, more...




modelPrecautions when charging your phone It’s not easy to find outGT-S5560Solutions and adviceHow long a phone or tablet should run on battery power. The operating time of the battery depends on several. Unfortunately, we could not find a single re...

TVs with a CI(CAM) module have gained great popularity in the video equipment market. This element allows you to watch satellite television without necessarily connecting a set-top box. Moreover, it is compatible with all operators operating in the country, including Tricolor TV. Setting up the CI module for viewing channels from Tricolor is quite within the capabilities of TV users, even those without special skills. Let us tell you how this process occurs on devices of different brands.

Some general information

The presence of a CI module on the TV makes it possible to view channels in standard quality, as well as in HD and . However, in order to access the broadcast, the item must meet the equipment requirements of the specific operator.

Required module characteristics

IN currently TVs with a built-in receiver are compatible only with the Tricolor satellite Eutelsat W4 (new name - Eutelsat 36A/36B). The device finds the satellite signal automatically. There is no need to separately set Tricolor TV tuning frequencies for the CI module.

Important! If in the subscriber’s region another Tricolor TV satellite is responsible for signal transmission, you will not be able to use the module.

In addition, it is necessary that the television receiver supports the following broadcast formats:

• DVB-S2;
• HEVC;
• 4K UHD.

Without this, the subscriber will not be able to view even the channels included in standard packages. Ultra HD format will also not be available.

Important! Before setting up the module on Tricolor TV, you must purchase a smart card from the operator that corresponds to the subscriber’s region of residence and connect it to the device.

Instructions for setting operating parameters

The algorithm for setting up the CAM module will depend on specific model TV. We recommend that you carefully study the instructions included with the device before starting the process. This article provides only general information. Setting up the CI Tricolor module on a TV from Samsung, Sony, Philips and other models always ends with the procedure for updating the activation keys. You can submit an update request at personal account on the company website.

Important! If you didn’t succeed in broadcasting the first time, we recommend rolling back the receiver settings to the factory level, and only then resuming attempts.

Working with Samsung TVs

For subscribers of the Tricolor operator, setting up the CI module on a Samsung TV begins with the “Satellite channel settings” section in the device menu. In this section you need to find the mark installed on the active satellite. Then scroll through the list of signal sources to the end and check the box next to User Sat1. This is necessary for the module to communicate with the Tricolor satellite. Next, go to the section for setting LNB parameters, where you change the lower frequency limit. It should be the same as the top one.

Then go to the “Broadcast” section, where the following actions are performed:

• go to the “Channel settings” subsection;
• select manual mode;
• find User Sat1, which was installed at the beginning of the settings;
• in the “Transponder” line, select “Create”;
• set frequencies and transmission speeds;
• save the entered settings.

After this, you need to click “Search”, check the signal level, and then start the search again. A list of television channels consisting of at least 6 items should appear on the screen.

To connect all other channels from the available subscriptions, you should return to the “Transponder” menu item, start a network search and click on “Search” again. The module will independently scan available frequencies and display the satellite TV interface to the subscriber.

Working with Philips TVs

Setting up the CI Tricolor module on Philips TV complicated by the absence of a cooperation agreement between these companies. Philipps does not implement Tricolor software into its TVs; therefore, the CAM module of the device cannot automatically recognize the required frequencies. To help him with this, the following actions will be required:

• In the TV menu, select “Installation” -> “Search for satellite”;
• activate the “Reinstall channels” item;
• click on the inscription “Start”;
• wait until the signal level scales appear on the screen;
• wait until the signal scales are displayed on the screen;
• Click on the “Back” arrow to return to the main menu.

The “Set” button should not be pressed yet, so that the set parameters do not change to the default values. Next step: go again to the “Installation” section, then “Satellite Settings”, from there to “Channel Installation” and select manual mode.

Important! The LNB column must contain the Tricolor satellite found by the module at the previous stage. If it is not specified, you should roll back the settings and perform the operations described above again.

How to fill out the remaining fields:

• transmission speed – 27500;
• polarization – horizontal;
• frequencies - in accordance with the equipment.

After this, you need to click “Search”, wait for the table to appear on the screen, and save it.

Setting up the CI Tricolor module on a Sony TV

TVs of this model can also be used through the “Settings” menu item. It sequentially selects:

• item “Digital configuration”;
• sub-item “Satellite auto-tuning”;
• “Antenna Configuration” window (check here “Fixed antenna or DiSEqC”.

The parameters set in the scanning window are left unchanged. Next, select the first satellite and set the LNB configuration for it. The frequency range values ​​are set depending on the antenna model. The necessary data is written in its instructions or on the converter body.

Then they return to the list of satellites and click “Start”. The CAM module will begin searching for available TV channels. The subscriber will only have to save the displayed list at the end of the procedure.

Working with LG TV

On devices of this brand, first of all, you should set the following values:

• antenna type – satellite;
• converter type – single;
• satellite name – Eutelsat 36A/36B;
• converter power supply – on (then mark “LNB”);
• Transponder frequency value is 12226.

Setting up the CI Tricolor module on the LG TV continues after saving these settings. The user needs to check the quality of the satellite signal. If the scale readings on the screen are less than 80%, the antenna needs to be adjusted.

If everything is in order with the signal, go to the channel settings item and set it to auto search mode. The module will display a list of available channels that need to be saved. Next, in the “Sound Options” menu section, you should set the MPEG4 mode. If you do not do this, the sound will not be in sync with the image.

At the end of the process, you need to go to the “CI Data” section and reset the device parameters to the factory level. After this, activation codes are requested and the setup is completed.

The CAM module or conditional access module is designed for viewing encrypted satellite or cable channels. It is inserted into the CI slot of the TV or receiver and decodes channels intended for paid viewing. Some receivers, for example Skyway Classic 4, have two CI+ slots, which allows you to simultaneously watch paid channels from two different operators (for example Tricolor and NTV+). Today, many TVs are equipped with a tuner for receiving satellite signals and have a slot for a CAM module. However, to view encrypted channels of Tricolor and NTV+ operators, the tuner and slot must meet the following characteristics: the tuner must support the DVB-S2 format, and the slot must support the CI+ format. Although most TV brands meet these requirements, you should carefully study the specifications before purchasing.

Since modules are a fairly new development, many people find it difficult to initial setup and operation of CAM modules.

I would like to start with the fact that the installation of modules on TVs from different manufacturers varies, and sometimes very seriously. LG proved to be the simplest and most loyal to the module. Here you just need to insert the module into the TV. Select a satellite dish in the menu and search for channels of a specific operator (Tricolor or NTV) and it will automatically and correctly find the channels of the selected operator.

But the most problematic from a setup point of view are Sony and Thomson TVs. You need to manually add the name of the satellite to them (recall that the satellite of the NTV-Plus and Tricolor operators is called Eutelsat W4 or Eutelsat 36E), as well as add transponder parameters (frequencies: 12226 for Tricolor and 12322 for NTV+) and converter local oscillator frequencies for both operators: upper and lower frequencies - 10750. Then you need to select “network search”, and the TV will find all channels of this operator. If there is no “network search” item in the menu, then all transponders will have to be added manually. Full list transponders are available on the operator’s website.

Now let's look at the most common problems and errors when working with the CAM module. The first and most common problem occurs when the TV initially initializes the module. When this happens, the TV sees the module, all information about the module and card is displayed in the menu, however, when the channel is turned on, it writes an error (the error code and explanation are different for different brands and TV models). In such a situation, you need to act as follows: turn off and turn on the TV. After turning on the TV, checking access rights between the TV and the module will begin again. In most cases, this method is more than effective. However, in some cases, for example, after a power surge or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.

Now regarding the problems associated with software of modules and televisions. Problems with modules not working correctly are usually found on early model TVs. But, fortunately, these problems can often be eliminated by installing the latest software for your TV. As for the module software update, it occurs only from the satellite. In NTV+ modules, the update can be turned on forcibly by simply selecting the required item in the menu. In Tricolor-TV access modules, satellite updates are broadcast for a limited amount of time (1-2 months), if during this time you have not managed to update the software, you will have to wait for the next one.

Despite the simplicity of the design, the CAM module cannot be bent or disassembled, and it is especially not recommended to reprogram the module, with the exception of the official operator software. You also need to protect the module from moisture, and if you remove the module from the TV for a long time, make sure that its connector does not become clogged.

Despite the difficulty initial setup, CAM modules are an ideal alternative to satellite receivers. Thanks to their simple design, they are more reliable than a receiver, they do not need an outlet, a remote control and do not take up space.

Important! Since Tricolor and NTV+ use different encodings (NTV+ uses Viaccess, and Tricolor DRE-crypt), therefore NTV modules do not fit Tricolor cards and vice versa.

class="eliadunit">

If your TV supports CAM modules, then you can watch paid satellite TV on it, such as Tricolor TV, NTV Plus, TELEKARTA, Rainbow TV, etc. You just need to purchase a smart card from the operator you need , module for this card, and insert the card with the module into the CI slot of the TV.

When choosing such a TV, the main thing is not to confuse it with DVB-T2, even if you tell the seller that you want a TV with a built-in receiver, he may sell you DVB-T2 instead of DVB-S2, and these are completely different things. Usually, by the model name you can read what type of receiver is installed on the TV. For example, at LG the letter “S” in the model name “47LM580S-ZA” indicates that the TV has a built-in DVB-S/S2 receiver.

The surest way to determine if your TV has a satellite receiver is to look at the back, where all the connectors are located, and find the “LNB IN” antenna input.

All such TVs have a “CI” slot for “CAM” modules. The “CAM” module is selected depending on the encoding in which the content is encoded, for example, if it is “Tricolor TV”, then the “DRECrypt” module is needed, preferably the latest version. There are no problems with the module; it can easily be purchased at a special store.

Brief instructions for setting up the CAM module "Tricolor TV" or "NTV PLUS" on LG TVs.

1. Install the Tricolor TV smart access card into the Tricolor TV conditional access module (CAM WEST CI+). Chip to the thick side of the module.

2. Install the conditional access module into the switched off TV.

3. Turn on the TV and look at the information about the module and access card; if there is no information or error code 17, check the installation is correct and register the equipment on the Tricolor website.

4. In the TV menu, in the settings, select the antenna type " satellite" In the settings of the Tricolor satellite dish converter, specify the satellite Eutelsat 36A/36B. Converter type single. Converter power supply (LNB) - on. LNB 10750. Transponder frequency - 12226 MHz or 12111 MHz or 11881 MHz (default settings) bit rate 27500. Let's look at the signal quality.

5. Go to setting up channels and turn it on automatic search(in new generation TVs) transponder frequencies from 11881 to 12418 will be registered automatically. At the same time, it is desirable that the TV be flashed with the latest version of the software, in this case the Tricolor TV CI+ CAM module will work more correctly, all transponders will be up to date, and you will correctly scan the necessary channels.

6. If everything went well and the channels are found, go to the sound settings on the TV and set it in the " Digital TV sound settings" parameter MPEG. This is done so that the sound on the channels does not disappear during viewing. Go to the module settings CI data (CAM) orCI Options > Settings and select the item " Factory reset". Turn off the TV completely.

9. An important feature of LG TVs is the “Automatic channel updates" It must be disabled, otherwise the TV will periodically reset the channel list you have configured.Go to settings"Automatic channel update"and set the parameter:off.Now you can fully enjoy the capabilities of your TV by watching high definition channels. Enjoy watching and bright emotions!

NOTE:

Problems with sound or incorrect switching of Tricolor TV channels on the CAM module were eliminated in the update to the CAM module in December 2014.

For self-updating CAM module on the TV, find the service channel in the list of channels of the Tricolor TV operator for updating by - " Telemaster".Usually it goes under the number333 according to operator's list. If it is not in the list, scan the channels again.

After you switch to it, you can update the CAM of the Tricolor TV module through the TV menu CI data (CAM) or CI Options > Settings > Software Download > OK. If new software is available and you are prompted to update, click the button OK On the remote control, the software update percentage will then appear. You must wait until the module software is completely downloaded from the satellite and after the update is complete, reset the module to factory settings: CI data (CAM) orCI Options > Settings > Factory Reset > OK

After the update, everything works correctly, no glitches are observed, all channels are always in place and with sound. CHECKED!

Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > Providers > Tricolor TV You can view information about packages and their expiration dates.

Explanation of subscription classes:

Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > General Information you can find out ID numberTricolor TV smart cards for renewing and connecting various TV channel packages.

If, after changing the frequencies by the Tricolor TV operator, the channels on your TV are not scanned, or the number of channels after scanning is less than 100, do the following: (Thanks to the user Dim)

The problem was the same as everyone else's. 70 channels, random numbering, etc. and so on.
CAM Module software - current, TV software (let's say LG MT24) - latest version. After the software update, nothing has changed.

Reset the TV to factory settings. In the settings of the satellite antenna and channels, set Satellite for Tricolor and NTV+ - "Eutelsat 36b" or "Express-AMU1" or "Express-AT1" in position 36°E.

In the settings you can also independently create a new satellite with the necessary parameters:

Converter Type: Single/Single

LNB Power (ON)

It is enough to add one Transponder/Frequency Tricolor TV: 12111 MHz or 11881 MHz Horizontal 27500

The most basic thing is to select from the list of transponders one of the Tricolor TV transponders 12111 MHz or 11881 MHz Polarization-H (Horizontal) Flow rate 27500.

Then select Manual search, select the home transponder for Tricolor (12111 or 11881) and be sure to check the Network Search / NIT checkbox. Click update and wait for a while. All channels must be registered in normal numbering. All the best.