Sew a cover for the tablet that you install yourself. Is it possible to sew a protective tablet accessory at home? Other possible options

It is unlikely that anyone would think of carrying a tablet without a case or a special bag. But choosing this accessory is not so easy: you don’t want to buy a standard one. A stylish and practical one, which is not a shame to demonstrate in the company of friends and colleagues, costs more than $30. Perhaps you'll like the idea of ​​making a tablet case with your own hands? It’s not difficult at all, it will only take 2 hours of your time, and as a result you will get a unique thing. Do you agree? Let's get started.

We sew a bright and soft bag for a tablet

You've probably noticed that most tablet bags do not have a complex design. Therefore, sewing such an accessory is quite simple.

What do you need

• Two pieces of fabric (width = 1.5 x length of your tablet; length = 3 x width of your tablet);
• Thin white batting/foam rubber/felt of the same size;
• Velcro;
• Scissors, thread, sewing machine.

How to do it?

1. We apply batting to one piece of fabric and stitch it with lines at a distance of 2-3 centimeters;
2. We place both pieces of fabric “face to face” and sew along the edge, turning them right side out;
3. We form an envelope from the fabric and make side seams;
4. We sew Velcro onto the valve.

To make such a bag for a tablet it will take a maximum of 1 hour and $10. And when you get the hang of it, you can sew several more options for different weather, events and costumes.

Tablet case from a book

If you decide to sew a tablet case as a gift, pay attention to this option. A book case is original and practical. And most importantly, this is a really necessary thing, and not a souvenir globe that will collect dust on a shelf for years. If you also guess (or recognize) the recipient’s favorite book, this will be an additional plus to your karma. After all, everyone is pleased to know that you didn’t buy a gift on the way in the first store, but thought through it down to the smallest detail.

What do you need

• Hardcover book. There is no need to buy a new one. On the contrary, the more old-school and colorful the cover, the better;
• Elastic bands;
• Stationery glue, scissors, acrylic paints;
• Drill or awl.

How to do it?

1. The most terrible point for book lovers is taking out the “filling” of the book: we only need the cover;
2. Restoring the inside of the cover. If you are lucky enough to find a book with interesting design or drawings, you can paste them on the inside. Or, as an option, rewrite one of the most memorable monologues by hand.
3. Using a drill or an awl, we make holes in the cover and insert rubber bands into them to secure the tablet.

This handmade case makes a wonderful gift. Or a great accessory for yourself. Who knows, maybe when you take out your tablet on the subway, you will meet a fellow book lover and, at the same time, a kindred spirit.

The most original cases for tablets are not sold in showrooms - you can only make them yourself. And now you know how.

This article will tell you how to make a tablet case with your own hands. Due to their small size, tablets have become very popular. They are convenient to wear and take with you on a trip. However, your tablet requires a case to prevent it from getting scratched, dirty, or damaged. Of course, you can buy a cover. The range of accessories is now large - for every taste. But it will cost much more. And why waste money when you can make the same one yourself, and maybe even better. Games for the gadget can be easily downloaded on the website gameraft.ru.

Making a case for a tablet or phone is not such a difficult job. Of course, anyone can do it. It can be made from scrap materials. And if you add a little imagination, the product will turn out very nice and interesting.

For work you will need the following materials:

colored felt or some other fabric;
cardboard;
thin foam;
button;
glue;
elastic band for securing the tablet in the case;
4 strips of leather 7–8 cm long and 1 cm wide;
threads

Felt can be replaced with any fabric of your choice or artificial leather. It is better to use thick threads to make the stitching more beautiful.

Manufacturing instructions

Cut the felt or fabric to the size of the tablet, leaving allowances for hems. Cut two rectangles from cardboard equal to the size of the tablet, and two pieces of leather slightly smaller in size. Round off their sharp corners.

Cut the foam rubber to the size of the cardboard. Glue each piece of cardboard with a piece of foam rubber. Place the resulting parts on the fabric so that there is a small gap between them and glue them. Fold the edges of the fabric inward and glue it to the cardboard.

Attach the ends of the strips to the corners of one piece of cardboard to form loops. They are needed to secure the tablet. Try the case on the tablet, and then glue the elastic bands to secure it.

Glue the cut pieces of leather on top of the cardboard to close it. Sew the cover on all sides to secure the connections. Carefully stitch it around the edges.

Make a clasp. To do this, carefully sew a piece of leather on one side of the cover, and attach Velcro to the other side.

The tablet case is ready. If everything was done correctly, it will turn out durable and beautiful. If desired, it can be decorated with beads or shiny braid. Something made with your own hands inspires self-confidence and awakens creativity.

You will need

• - thick cardboard;
• - ruler;
• - scissors;
• - pins;
• - sewing machine;
• - textile;
• - elastic tape;
• - threads to match the fabric.

Instructions

Tablets differ from each other not only in models, but also in dimensions. Therefore, before you start making the case, you need to measure the dimensions of the device using a ruler, namely: width, height and length. Based on the data obtained, you should cut out 5 pieces from cardboard. If cardboard is not found, you can use book covers or chipboard. The sample details correspond to the following parameters: 20x16.5 cm, 20x1 cm, 20x7.5 cm, 20x1 cm and 20x15 cm.

You need to cut 3 rectangular elements from the selected material. One of them is equal to the size of three cardboard parts, the other is the size of the other two, and the last one is the size of all of them combined. When cutting out rectangles, you need to take into account that the seams will require an additional couple of centimeters.

You need to cut 4 equal pieces from the elastic tape and sew each of them onto the corners of the smallest fabric rectangle. This way you will get mounts that will securely fix the tablet in the case you made yourself.

Next, the resulting part needs to be connected to the middle rectangle of fabric. The elements need to be attached to each other so that the front sides are on the inside, and sew them together on the leftmost side.

The largest rectangle should be placed on top of the formed part, face inward. Then use pins to fasten the sides together. Cut a piece of the required size from the elastic tape and place it between the fixed elements so that it is at the level of the corners. Sew the future tablet case on three sides using a sewing machine.

After these operations, you need to turn the part right side out. Place the corresponding cardboard elements into the case in order. Each of the rectangles must be secured with machine stitching.

The tablet computer has become an integral part of the lives of so many people - lightweight, compact and so “smart”. They take it with them everywhere and everywhere, use it often - and all this, of course, can lead to scratches and other defects that are inseparable from frequent and long-term use of any thing. A good-quality, soft case will help protect your favorite device. In this master class we will tell you how to make a tablet case with your own hands. In addition to the tablet itself, you can fit several more things into it - a notepad, office supplies, even a phone or money - thanks to additional functional pockets and compartments, everything will fit!

Materials and tools for making a case

• cotton in three different matching colors
• seal
• magnetic button
• lightning
• standard set of sewing accessories: thread, scissors, chalk, ruler, pins
• sewing machine and iron

How to make a tablet case

We will need to cut out from cotton 6 rectangles measuring 21 cm by 27 cm and two of the same from the seal, 2 cotton parts measuring 15 cm by 18 cm and the same from the seal, as well as a couple of small rectangles 18 cm by 12 cm for the inner pocket and more several small rectangles for processing zippers and other small parts.

Let's start by assembling the back wall of the case; it will have a pocket with a zipper.

Take one of the large rectangles and make a marking line 4 cm from one of the short sides.

Let's cut the fabric along this line.

Now we take one of the walls of the pocket and trim the zipper to the length of its long sides. We will also prepare a couple of small rectangles with the sides ironed to the wrong side for processing the ends of the zipper.

We fix them with pins on the clasp.

And we sew.

Now we will sew in a zipper and a pocket. We fold the parts as shown in the photo. Let's sew.

Sew the second edge of the zipper in the same way.

If you unfold and iron all the parts, the sewn-in zipper will look like this.

Now we fold the parts of the pockets facing each other and sew the letter “P” on all three of their free edges.

The zippered pocket is sewn in!

Now let's work on the front volume pocket. Take two more large rectangles and fold them right sides together.

We unfold the parts, steam them and lay a decorative stitch along the seam.

Now, using an iron, we fold the sides of the future pocket, as in the photo. We make sure everything is smooth!

We sew along the ironed edges, securing the fold.

And iron two more folds, forming the volume for the pocket.

This is how it turned out from the front side.

Now we will make the valve. We duplicate the part on which the magnetic button will be placed and mark the middle to make it easier to insert the button.

Having placed it, we admire the front side.

Now we put together the remaining parts for the valve in the order shown in the photo.

We sew along the perimeter, leaving one of the sides free.

It would be better to trim off the excess filler.

Now you can unscrew the valve and steam.

Now let's place the bottom of the button on the front pocket.

The main work is finished, take a break and read the continuation of the master class in the next material.

Having bought a tablet, many people think about a case to keep their purchase in excellent condition.

Choosing Case for tablet, I want to dress it up in a good, high-quality and convenient folder case. And if the tablet is used for communication, meetings with clients, or various materials are printed, then a folder-case with a built-in keyboard comes in handy here!
This cover is quite easy to sew yourself. And then the tablet will be dressed exclusively.

In order to sew Case for tablet(7 inches) you will need:

1. Fabric
2. Cardboard
3. Foam rubber or padding polyester
4. Scissors
5. Stationery knife
6. Braid, binding, elastic
7. Velcro or riveting
8. Ruler
9. Threads, fastener

Step one:
Before you start sewing the cover, you need to make a stencil. To do this, you need to trace the tablet onto a sheet of paper. It will look like this:

The distance between the two halves should be at least 2 cm.

Step two:
Using a stencil, you need to mark and cut out two halves from cardboard. The cardboard needs to be thicker. In this example, a box was used. Each half must be no smaller than the size of the tablet. You can trim any bumps on the cardboard using a utility knife.

Step three:
Now you need to cut out 3 rectangles measuring 32x23 cm, two of them from fabric and one from padding polyester.

I would like to give a little advice on choosing fabric: for the front side you can use any fabric you like, but for the inside tablet case You should choose a fabric that does not slip (cotton fabric is best). You can also use drape fabric, then you won’t need padding polyester.

Step four:

You need to take the tape, attach it to the cut fabric and mark where the Velcro will be. Then sew the Velcro to the braid. It should look like this:

Then the finished braid must be sewn to the fabric that will be the front one.

Step five:
Take the fabric that will be inside the case, attach the tablet (you can use a prepared stencil) and mark the location of the elastic bands. You can mark the places of the elastic bands or baste it, or you can glue it with PVA glue. It will look like this:

The elastic band can be made as shown in the example, or the top can be made into a single strip.
Having secured the elastic bands, we apply the braid between the halves of the cover and secure it:

The tape in the middle will secure the elastic and hide its edges. Now you need to check if everything is secured smoothly (elastic bands and braid), then sew the braid on a typewriter.
Step six:
The last step is to connect everything. You need to put the front fabric, then the padding polyester in the middle, and the inner fabric on top, stitch or baste three fabrics on three sides: two sides and the bottom. Insert cardboard between the inner fabric and padding polyester on top (cut out two halves from the box). The cardboard should not be visible from the fabric. Then attach the tablet and see if there is anything superfluous anywhere. If everything is in order, then you can sew on the binding. It serves as an edging and gives a finished look.


Ours is ready Case for tablet, without spending a lot of time and money.

The case can be used not only as protection for the tablet, but also as a stand.