Installing official firmware on Samsung Galaxy S4 mini I9192 Duos. Installing official firmware on Samsung Galaxy S4 mini I9192 Duos Firmware for samsung galaxy s4 mini duos

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of different functions. Taking a photo, counting the amount of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

Smartphones running operating system Android systems have long filled the whole world with their diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem simple reset to factory settings may not be enough - you need to flash Samsung Galaxy S4 Mini Duos GT-I9192.

Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S4 Mini Duos GT-I9192.

What do we need?

1. Device charged at least 50% (if possible).
2. Original USB cable.
3. latest version.
4. Latest firmware:

Single file:Download Android 4.2

Multi-file: Download Android 4.4

Samsung Galaxy S4 Mini Duos GT-I9192 firmware process

• If Kies was installed on your computer, remove it.
• Download and install for Samsung smartphones and tablets.
• Download and install.
• Reboot the computer.
• Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.

• On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number") and turn on " USB Debugging«.

• We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
• After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.

• The phone has entered download mode.

• Let's launch Odin on behalf of the administrator.
• In this state, connect the device to a computer with via USB-cable (exclusively USB 2.0) to flash Samsung Galaxy S4 Mini Duos GT-I9192. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.

• In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

• This is what the program window looks like ready for firmware:

• Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

• Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.

How to flash Samsung Galaxy S4 Mini

Brief instructions for flashing Samsung Galaxy S4 Mini GT-I9190 / GT-I9195 to new custom or official firmware using Odin, as well as installation CWM recovery and obtaining super user rights (Root) on the phone

Pre-download the website you like. firmware from the site http://samsung-updates.com/device/?id=GT-I9190, and unpack it to any convenient location on your PC.

1) Launch Odin v3.09 (if it is not available, download it from the Internet and install it, also do not forget to install the drivers for the phone on your computer, the drivers come in the accompanying program “Kies”), open the task manager and close all processes related to Kies,
2) Turn off our smartphone. We press three buttons on the switched off phone: volume down + center key + power button. A warning about the danger of the firmware will appear, click “ Volume up” to confirm your desire to perform this operation.
3) Connect the smartphone to the computer using a standard USB cable (it’s better to use USB 2.*, you can also use USB 3.0, but it doesn’t work stably yet, so it’s better not to risk it). In the program window, the window with the port number through which the phone is connected should light up in yellow.
4) In Odin, check the box next to Auto Reboot (enabled by default) and F. Reset Time, indicate the unpacked files from the firmware archive, and that’s it.
On the right side of the program, select parts of the firmware from a pre-downloaded archive
Button B.L. upload the file BOOTLOADER_*********.tar.md5
Button AP upload the file CODE_*********.tar.md5
Button C.P. upload the file MODEM_********.tar.md5
Button C.S.C. upload the file CSC_***********.tar.md5

5) Click START, the Samsung Galaxy S4 Mini GT-I9190 / GT-I9195 firmware process has begun
6) We wait for the green (or blue, depending on the program version) PASS sign above the port and after rebooting the smartphone, you can disconnect the cable.
7) We use

Installation instructions CWM recovery on I9190 and getting root

The instructions provide a method for installing a zip file (via CWM recovery) from a memory card. You can do without a memory card, then you need to copy the zip to the built-in drive and in CWM select the installation of the zip from the built-in drive.

1. Download the installation archive to get root S4Mini_RootKit_v1.zip (1.5 MB)
2. Without unpacking the archive, place it in the root of the memory card.
3. The memory card with the installation archive must be inserted into the smartphone.
4. Download the archive with the Odin flasher to your computer – Odin_v3.09.zip (971.81 KB)
Unpack it to any convenient place.
5. Download the archive with the installation file CWM recovery version v6.0.3.7 to your computer – recovery-clockwork-6.0.3.7-serrano3gxx.tar.zip. Place the file recovery-clockwork-6.0.3.7-serrano3gxx.tar.md5 from the archive in the same folder in which Odin3 v3.09.exe is located.
6. Launch Odin using exe Odin3 v3.09.exe
7. In the program window, uncheck the “F. Reset Time"
8. Turn off your smartphone
9. Press and hold the home, power and volume down buttons until the loading screen appears.
10. Connect the USB cable to your computer and press the Volume Up button
11. On the computer in the Odin program, click on the “AP” button and select the CWM recovery installation file – “recovery-clockwork-6.0.3.7-serrano3gxx.tar.md5”, to start the firmware process, click the “Start” button. If Odin does not recognize your smartphone, install Kies. Along with it, the drivers necessary to connect the smartphone in Odin mode will be installed.
After recovery is installed, the smartphone will reboot.
12. Immediately after turning on the smartphone (vibration), go to recovery: hold down and do not release the “home” and volume up buttons. After loading the CWM recovery menu, release all buttons.
13. Select “install zip” -> “choose zip from extSdCard” -> select the file S4Mini_RootKit_v1.zip -> “YES – Install S4Mini_RootKit_v1.zip”, wait for the operation to complete.
14. Use the power button to return to the main CWM menu and select “reboot system now” to reboot.
If recovery offers “disable flash stock recovery”, agree.
Upon completion, Android will boot with available root.

A couple of useful things for Samsung Galaxy S4 Mini GT-I9190 / GT-I9195

Functions of the buttons in the CWM recovery menu:
– volume buttons perform navigation functions;
– “home” – select an item;
– power button – back.

How to enter recovery?– with your smartphone turned off, hold down and do not release the home, volume up and power buttons. After vibration, the power button can be released. After loading the recovery menu, release all buttons.

After CWM installations recovery is launched with the same button combination.

Note that this instruction mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself. Moreover, under no circumstances should these instructions be used with other Galaxy S4 mini models, of which there are quite a few on the market.

The new update file for your device is version I9192XXUCNG2 Android 4.4.2 KitKat, and if you still want to take a chance and manually update your smartphone rather than wait for the update availability notification via OTA, then you can use the guide provided below. First, read some information to prepare for flashing:

• Use the instructions only for the Galaxy S4 mini I9192 model;
• Do not try to update any other smartphone with this firmware;
• Galaxy S4 mini I9192 has already been received in Russia official update and therefore you should have known this if you follow our news;
• Make sure you have downloaded and installed the official Samsung USB drivers on your computer;
• Disable on your computer Samsung program Kies, as it will block manual flashing;
• You will need the Odin program if you were unable to update your Galaxy S4 mini using Kies;
• Disable any anti-virus software while flashing your smartphone;
• Enable USB debugging in Galaxy settings S4 mini. To do this, you must open the developer settings options: open Settings/…/About device, find the build number and tap on this line 7 times. Then enable USB debugging.
• If your smartphone is flashed custom firmware, then you will have to completely erase the system partition;
• If your Galaxy S4 mini is 100% stock, then you don’t have to worry about losing information;
• Before installation new firmware delete MicroSD card from Galaxy S4 mini;
• Do it just in case backup data from installed applications, SMS and other data using Helium for Android or any other similar software;
• Sync contacts and data with your account Google entry default;
• Check your phone's battery charge and make sure that the battery is at least 50% charged so that the phone does not turn off in the middle of the installation process;
• This guide is intended for advanced users, but in any case we are not responsible for all consequences, be it the loss of personal data or the smartphone getting bricked.

I think this is enough to get you ready to install the official Android 4.4.2 reset on the Galaxy S4 mini I9192.

Instructions: how to flash Galaxy S4 mini I9192 with official Android firmware 4.4.2 KitKat:

• Download the I9192XXUCNG2 Android 4.4.2 KitKat firmware file from this link: SamMobile. We remind you that you must have a registered account with SamMobile, otherwise you will not be able to download anything. Registration will take about two minutes.
• After you download the firmware file, extract everything from the archive into a separate folder and save it to the desktop on your computer.
• Download Odin3 v3.09 from the link and extract all the contents and also save them in a separate folder on your computer: (downloads: 5189)
• Turn off your Galaxy S4 mini Duos.
• Download it in Download Mode.
• Run on your computer Odin program.
• Connect your smartphone to your computer using a USB cable. Wait until Odin recognizes the connected device. If this does not happen, then reinstall the drivers.
• Next, click on the AP button in Odin and mark the file with the extension .tar.md5 that you received in step 2. This is the firmware file that you need.
• Make sure all settings in Odin are set to default.
• Please note that the Re-Partition option is unchecked.
• Press the START button and wait until the update is installed.
• After this, your smartphone should reboot and you will see that Android 4.4.2 KitKat has successfully booted on your Galaxy S4 mini Duos I9192.
• Disconnect your smartphone from your computer.

If your Galaxy S4 mini rebooted successfully and the interface works fine and there were no problems during the installation process, then you can close this article. If problems arise and the update installation process has not been completed, we offer some tips below.

Tip 1: If Odin freezes or a FAIL warning appears, then you should repeat all the steps in the instructions from the beginning until you install the update.

• turn off your smartphone and remove the battery.
• close Odin and make sure your phone is disconnected from your computer.
• Boot your smartphone into Download Mode, launch Odin and repeat the instructions again.

Tip 2: If Odin says the flashing process has completed successfully, but the phone cannot boot to the start screen, then you will have to do a “Factory Reset”. This will destroy all data on the system partition, but then you can boot the Galaxy S4 mini normally.

• Turn off the phone, remove the battery and make sure it is not connected to the computer.
• Boot your phone into recovery mode.
• select “wipe data/factory reset”.
• return to the main menu of recovery mode and reboot the device – Reboot now.
• wait until the phone is fully loaded and enter your details account Gmail.

KitKat brings general performance improvements as well as improved design user interface with white icons in the status bar, enhanced Emojis, full-screen display of music album covers on the lock screen and much more. With the new update, the device will also support wireless printing.

Developer: Samsung
Interface language: Russian English
Input languages: Russian English Ukrainian
Release date: 2014
Compatibility: Samsung GT-I9192
Version: I9192XXUCNG2 4.4.2

Please note that these instructions are mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself. Moreover, under no circumstances should these instructions be used with other Galaxy S4 mini models, of which there are quite a few on the market.

2. Download and Install the SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.9.0.exe driver as Administrator, then restart the computer.
(Attention: If the divers are not installed (this happens, the problem comes out when performing step 4), then you will have to:

3. Download and install as Admin latest version KIES ( or ), then restart your computer. (The Kies program can be uninstalled after the firmware is finished))

4. Charge your phone battery to at least 75%, preferably 100%. Connect the phone with a cable to the computer (to the port on system board BB, these ports are mainly located on the back, next to the connector network card), wait for the drivers to be installed and disconnect the phone from the computer. I advise (not necessarily, but just in case) to enable USB debugging - “Settings” > “Options” > “About device” and tap on the build version many times, the developer options will open, check “USB debugging” there.

5. Disable antivirus on your computer.

6. Close, if installed, Kies on the computer (if open) and from the task manager end processes named Kies...

7. Unpack Odin_v3.07.zip and the firmware file (preferably in a separate directory, some recommend in the root of the disk).

8. Run as Administrator from the prepared directory Odin3 v3.07.exe

9. Press:
a) if sewn with Odin_3.07 - PDA button, or
b) if sewn with Odin_3.09, then the AP button;
Then find it in the window that opens and select the firmware file. Check the “Autoreboot” checkbox (usually when you start Odin, this checkbox is already checked, then you just don’t need to touch it).

10. Switch the phone to firmware mode: with the phone turned off, press and hold the Vol.Down (Volume down) + Home (center button) + Power (on/off button) buttons and release them immediately after vibration and the phone starts turning on. Wait for the yellow warning triangle.

11. Confirm the transition to the firmware mode (Odin mode) with the Vol.Up button. A green robot will appear and the words “Downloading” and “Do not turn ....”

12. Connect the phone with a cable to the computer (preferably to the same port on the BB system board from which the drivers were installed in step 4. Let me remind you that these ports are mainly located at the back, next to the network card connector) and, if necessary, wait for a new one installing drivers on your computer (this happens, so don’t rush).

13. In the upper left part of the One program, a small blue window will light up indicating the COM port number. The same number (COM port number) will appear in the window at the bottom left. This means that the drivers have been installed correctly and everything is ready for flashing. Click Start.

14. After pressing Start, on the phone under the green robot and the inscription “Downloading” there will be a blue download bar, and on the computer in Odin in the upper left window the words BOOT, RECOVERY, SYSTEM, MODEM, CACHE, HIDDEN and eventually RESET will appear on a white background on a blue background. The phone will reboot and installation of the firmware on the phone will continue. Without touching anything, without disconnecting the body from the computer, you need to wait for the firmware to finish and the green window with the inscription PASS.

15. Disconnect the cable (the message “Removed!” will appear in the window at the bottom left) and press Exit on Odin.

16. Here, on the advice of some experts, the body can (but not necessarily) be overloaded by holding Power (on/off button) for a long time.
And you have new firmware.

Everything is ready :) As a result, ALL actions from 1 to the last point should take no more than 25-30 minutes, including rebooting the BB after installation.