Mms messages beeline. Automatic setting of mms on the beeline. Setting up MMS on MTS

MMS Beeline - how to connect and configure - 4.1 out of 5 based on 46 votes

This type of message is no longer used as often as before, because at one time it was advanced technology, which allowed you to send not just a text message, but multimedia messages. Now this function not so often used, but still used by a fairly large number of people. This material will discuss how to use this service on the phone.

If you have never used this option on your phone, then there is nothing complicated about it. It is very similar to the Beeline SMS option, only in the first case, the user can only write text, and when using MMS, you have the opportunity to add images, photos, short audio recordings to this text. All this will be available from your mobile phone, if you have an Internet traffic connection, so keep in mind that this service uses Internet traffic to send these kinds of messages.

How to enable MMS on your phone

If you need to send messages from your mobile phone, then you need to first of all pay attention to the fact that your phone supports this service. You can check this in the instructions for your phone or find a description of it on the official website of the manufacturer.

Text-decoration:="" underline="">moskva.beeline.ru/customers/help/mobile/mobilnyy-internet/nastroika-telefona/ or dial a phone number 0604 32 . After that, it is enough to restart your phone by simply turning it off and on again.

How to send MMS from phone

After connecting the service and receiving the settings, you can proceed to sending messages. To do this, you need to follow these steps on your phone or smartphone:

1. Go to phone menu
2. Select item " Messages»
3. Choose " New MMS» can be create mms
4. Write text and add attachments
5. Specify the recipient's number
6. send a message

As for the size of the message, it should not exceed 500 Kb, and if there is text, it cannot exceed 1000 characters. Send this type of message to the numbers of all operators in Russia, and in addition to mobile operators, sending can be done by e-mail. If necessary, one MMS can be sent to several subscribers at once, for this their numbers should be listed separated by commas.

Can't send MMS

If for some reason you are unable to send a multimedia message from your phone, then you should follow a series of steps to find out the cause of the problem. So, for this you need:

1. Check network connection and GPRS signal (network and GPRS signal indicator is displayed at the top of the mobile phone display)
2. Check if the number of the subscriber to whom the message is being sent is correct
3. It is also worth checking the correctness of the specified settings for your phone model.
4. If all else fails, then you should contact the nearest communication salon moskva.beeline.ru/customers/beeline-on-map/

The message may not be delivered because the user's phone was turned off or the SIM card is faulty.

How to view the received message on the site

If you receive a message like mms.beeline.ru/, then you received it because the service is not configured on your phone, or for some other reason you could not receive it on your phone. In this case, you will be sent a link by which you can view this message on the Internet.

It is enough for the user to do this simply, you need to enter this data in the browser address bar of the site and you will be able to view your MMS. It is worth noting that this kind of message will not be stored for a long time, there is a certain storage time, that is given link will only work for three days. After that, the information will be automatically deleted from the company's server.

MMS is the ability to send messages containing multimedia: audio recordings, photo and video files, maximum size which does not exceed 500 Kb, and the number text characters- 1000 characters. By setting MMS, you can not only send, but also receive messages from your friends and relatives.

You can send multimedia to any other number or to email box. The data transfer takes place in the territory Russian Federation, as well as beyond.

The service is paid. The cost depends on the tariffs in force at a particular moment. On average, sending one MMS message will cost you 7.95 rubles.

from Beeline?

In order to obtain information about whether the service is connected, we recommend contacting the Beeline technical support service by calling 8-800-700-0-611 . You can also go to the Personal Account on the official website, where the list of valid options is displayed.

If such a data transfer service is not found, activate it in one of the following ways:

• dial the command *110*181# on your gadget, which activates a package of 3 services, in particular MMS;
• go to the Operator's Personal Account cellular communication and select the "Available" tab from the "Services" menu (such a connection can be made both on a desktop computer and through the Beeline application on your smartphone);
• visit the Beeline network office by asking one of the employees to connect (help is free of charge).

How to set up MMS automatically from Beeline?

As soon as the MMS service is connected, in order to read and send multimedia messages, you will have to activate it. Follow the instructions below:

1. Follow the link "Configure MMS" to get the settings for specific model phone.
2. In the drop-down window, select the gadget model or enter a name in the line provided for this.
3. Click on the "MMS" button and activate the command "Yes! Go to MMS settings".
4. If it is possible to make settings in automatic mode Enter your phone number in the field and confirm sending the data. When setting is available only in manual mode, you must strictly follow the instructions that come with your phone along with the warranty. Be careful, because for different models, manual activation of MMC can be done with differences.
5. After you automatically receive the MMC configuration files, you need to apply them and restart your mobile device.

There is another way to use the automatic service settings - call 060-432. After rebooting the gadget, you can safely receive or send multimedia files to your friends and relatives.

Setting up MMS manually

If, due to certain circumstances, you are unable to enter the site in order to retrieve the settings for activating the service, use the settings menu on your phone. To do this, by entering the Settings, create an MMS profile, which includes the following data:

After entering the parameters, save the profile and restart the phone. Now you will be able to use MMS messages.

Happy connection everyone!

Today, the MMS service, no longer being something unusual and new, remains one of the most popular, because it allows you to transfer files with maximum convenience, including photographs and various images.

Many users are specifically trying to choose exactly those cellular operators that have provided batch MMS messages. For example, MTS has packages for ten, twenty, or even fifty messages offered to customers, MMS + is a discounted service, and special tariff plans with unlimited MMS messages. There is even a free MMS show in the arsenal!

You have to set up MMS on Android for two reasons:

• Purchase of a new smartphone;
• If the settings have been reset to factory settings.

In any of these cases, you will have to change the configuration for the service to work. You can do this in 4 ways.

Automatic setting

Here, as the name implies, our participation is minimal, and this is very good. The bad thing is that you can use this setting only once - when you first register the device in the network of the selected mobile operator. After that, everything should be already configured, and re-acquisition of data is usually not required. The algorithm of our actions is as follows:

• Installing a SIM card;
• Turning on the device (if necessary, entering a pin code). After the registration is completed, the necessary values ​​are searched in the database of your operator, and the information is sent to your device.
• After receiving the configuration profile, accept it and save it. Automatic tuning is completed.

Operator assistance

This method, like manual entry, can be used an unlimited number of times. But! As you understand, it will not work to sit exactly on the fifth point, since you will have to perform certain manipulations.

Each operator mobile communications has a consultation number (service is free):

• Beeline - 0611;
• MTS - 0890;
• Megafon - 0550;
• Tele 2 - 611 (or 679);
• Motive - 111.

Further, following the instructions of the automatic informer, we establish a connection with the operator, and order the necessary settings, accept them, and save them. Then we reboot the device. Sometimes the service needs to be activated, then we call again and ask the operator to enable the service to this number. With this, the MMS setup will be completed.

Setting up mms on android on our own

What should I do if I can't get through to the operator? In this case, you will have to act on your own and set the settings manually.

Step by step it looks like this:

• We go to the applications menu;
• Select the item "Settings";
• In the menu that opens, go to “networks” (on some devices “more”);
• Select "mobile networks";
• Go to the "access points", check the box "mobile data";
• We get to the section "Internet access points", click "new access point";

We perform the following actions in accordance with those indicated in the table:

We leave everything else as it is. Please note that some devices have a "save" function. After installation, reboot the device.

We order settings on the website of the operator of a particular region

To use this option, we change our phone to a computer, connect to the Internet, and through a search engine we find the page of our operator. Select the desired smartphone model, enter your mobile number and captcha. We press "send". Within a few minutes we receive information, save it, install the necessary profiles. At the end of the process, we do a full reboot of our device.

If it still does not work, then you need to look for an error, as a rule, in your actions.

In our material, which you carefully read, we talked about all possible ways MMS settings on android for different operators. Obviously, there is nothing super complicated in coping with the described process yourself. Follow the instructions in the instructions and enjoy the features of the popular MMS Messenger. Good luck!

Subscribers have to independently request Beeline MMS settings since the mobile operator turned off automatic connection. Fortunately, it's pretty easy to do it yourself, even if your phone model is designed for manual data entry.

What is MMS

MMS is the multimedia version of SMS. In addition to text, it can be used to send photos, audio recordings, short videos. The volume of such a message is limited to 500 KB, which is equal to 1000 characters. text message. The price of such a service depends on the tariff plan used by the subscriber. However, most often it is about 8 rubles, and some give a package to use MMS for free. You can find out how much it costs to send one multimedia message in Russia and abroad by calling the hotline and on the website. One of the advantages of MMS is the ability to send letters to e-mail.

Unfortunately, this species communication has not become as popular as SMS, so Beeline continues to include it in the Three Servants package, but sends MMS settings only upon request.

In some cases, the data comes in the form of messages to the phone. The configurations must be run and saved, after which the phone must be rebooted. However, more and more users are faced with the need manual setting MMS to Beeline.

Automatic setting

Before connecting MMS, you need to make sure that the phone is really in this moment does not work in this mode. You can check in two ways:

• on the hotline 0611 (88007000611);
• in your Personal Account on the Beeline website or in mobile application in the "Services" section.

If the function is not active, then you can connect MMS to Beeline using the USSD command *110*181# or via a link in your personal account. The first step is to get the so-called package of three services, which also includes Internet settings. Once you have access to this package, you can proceed to further action.
You can set up MMS on Beeline only taking into account the phone model that will be used to receive and send messages. In mobile mode, you can call the line 060432, where, using the prompts of the autoinformer, the subscriber selects his own device and sends himself the settings.

The cost of the message that is requested to set up MMS is 0, the same as the cost of setting up at the company's office.

The MMS setup via the Internet works the same way. On the service activation page, a phone model is selected, a number is entered, and data for a specific gadget is sent to it. In the case of automatic settings, it is enough to save everything and reboot the device.

Manual setting of MMC

Sometimes not automatic settings are sent to the smartphone, but a text instruction on how to set up MMS on Beeline. It is necessary to follow this plan, which is usually not very complicated. One has only to create an MMS profile and register certain fields there:

Unspecified fields are left blank. For those who have had to set up the Internet on their own, this instruction will seem very familiar. However, if these actions cause difficulties for the subscriber, you should contact the Beeline service office staff who will help you set up MMS on Beeline. They will also tell you how much it costs to send messages.