Connecting satellite TV without a receiver to a TV. TVs with built-in satellite receiver: how to select and configure. Manually tuning your TV to satellite channels without a receiver

Today, televisions that have receivers are very popular. Using these devices you can connect Built-in receivers in documents are displayed as a “DVB-S/S2” receiver. As a rule, most models with this function are produced with liquid crystal display. The most common manufacturers are LG and Samsung.

with the receiver?

In the case of built-in receivers, you need to pay attention to back panel TV. Regardless of the model, there should be an LNB IN connector there. It is designed to connect satellite dish. Additionally, an LNB OUT output must be present. With its help, you can connect a second receiver to the TV.

There is a VIDEO connector for video signal. His responsibilities include ensuring average image quality. Without AUDIO it will not be possible to hear sound signal wherein. The stereo headset connects directly to the TV or amplifier. The Internet port will allow you to take advantage of local network. Additionally, you can connect to a personal computer. Lastly, Smart TV is checked on the TV. An audio signal is supplied through this connector. In turn, the picture on the screen must be of good quality.

Setting up a TV with a receiver

Setting up the satellite DVB-S2 tuner built into the TV is quite simple. IN different models The menu is slightly different, but in general the instructions are the same. Setting up satellite TV in Samsung TVs as follows. First of all, you need to go to the menu. There should be a "Broadcast" tab there. Through it you can go directly to setting up the channel. When selecting a subsection satellite system, the TV will ask for the owner's PIN code. By default, manufacturers indicate 0000.

After a successful transition, you can select LNB settings. At this stage, it is necessary to check whether the system has found a satellite signal. If this does not happen, then you need to select the DiSEqC mode. Next, you can enter the menu and select a satellite signal. After everything has been done, all settings are saved without fail.

LG TVs with receiver

All TVs with built-in satellite receiver LG companies are produced with interesting lighting. Screen resolutions vary greatly between models. Generally, Smart TV is supported. Additionally, good viewing angles should be noted. Tuners are mainly installed analog and digital. The average screen scanning frequency is 50 Hz. At the same time, the update rate is around 100 Hz.

The audio system on a TV is usually two-channel. The power of one speaker is on average 5 W. Video signals are supported from 480p to 1080p. For convenience, manufacturers equip models with various connectors. They can be used to connect headphones, speakers or personal computers.

Model LG 24LB450U with receiver

This LG LCD TV with a built-in receiver has a resolution of 1366 by 768 pixels. This model has backlighting. The viewing angle of the TV is 178 degrees. Analog and digital tuner available. Image processor - "Triple". The sweep frequency is 50 Hz. The TV audio system has a special decoder installed. With its help, the sound is more voluminous.

All major video formats are supported by this model. Among other things, you can select a large number of component inputs. Standard antenna connectors are provided. Additionally there is a digital optical audio output. With a stand, the dimensions of this model are as follows: height 556 mm, width 384 mm, thickness 140 mm. The weight of the device is 3.7 kg. The cost of the model on the market is 12,000 rubles.

TV LG 22LB450U

The resolution of these built-in LCD TVs is 1366 by 768 pixels. At the same time, the viewing angle is quite large. Also worth noting is the good range of the image processor installed in the “Triple” series. The panel scanning frequency is 50 Hz. In this case, the update parameter lies within 100 Hz. The color system supports all major standards.

The audio system is installed two-channel. This model has two 5 W speakers. There are various sound and optimization modes. This model also boasts a wide range of video signals. Among other things, it should be noted the presence of expansion slots. The manufacturer provides a standard IPS matrix. The cost of this model is 10,000 rubles.

What is the difference between Samsung TVs and receivers?

TVs with a built-in satellite receiver from Samsung, as a rule, differ in their functionality. In this case, various contrast settings are provided. The resolution of many models is around 1920 by 1080 pixels.

Image processor - "Hyper". Among other things, it should be noted that the refresh rate is good. There is a picture-in-picture mode. Another thing worth mentioning is the color system. It works on PAL, SECAM and NTSC format standards. Video signals are received by the TV in the range from 480 r to 1080 r. Optical digital audio output is installed on most models. The energy consumption of Samsung TVs is acceptable. The average device voltage is around 106 V. When using the economy mode, only 45 V is consumed.

Model "Samsung UE40H5270"

These TVs with a built-in satellite receiver have a resolution of 1920 by 1080 pixels. Contrast system - "Mega". Additionally, many will be pleased with the pleasant backlighting of the TV. Smart TV support is provided. There are also two tuners available.

The image processor is of the "Hyper" class. With its help, the refresh rate increased to 100 Hz. The audio system is two-channel with stereo sound support. A USB port is provided by the manufacturer. There are also connectors for connecting to a TV personal computer. The dimensions of this model are as follows: height 908 mm, width 558 mm, and thickness 190 mm. The total weight of the TV is 8.3 kg. On the market it will cost about 30,000 rubles.

Summarizing

As a result, we can say that televisions with a built-in satellite receiver are undoubtedly needed and in demand. They are set up quite simply, and anyone can handle it. The models presented above are quite different from each other. The LG 24LB450U TV is in greatest demand. In pursuit of best quality Images can be seen of the Samsung model. The TV shown above is a pretty good choice.

In September 2017, the Tricolor company launched the Online TV option in test mode, which for the first time made it possible to legally watch the content of a satellite operator without a dish. Since July 2018, thanks to new developments by the operator, you can connect to Tricolor without a satellite and experience all the benefits this decision every subscriber can.

How does Tricolor TV work without a satellite dish?

Broadcasting satellite television channels in digital quality via the Internet is the main principle of the new option. Thanks to the additional RJ45 input on new receiver models, you can connect and watch Tricolor TV without a dish yourself, either directly or via a Wi-Fi network.

How to connect Tricolor without an antenna

For Tricolor to work without a plate, a set of new equipment is needed. To connect, you will need an interactive receiver released no earlier than three years ago, as well as an additional computer cable"twisted pair" In addition, the Internet speed must be at least 15 Mbit/s.

Step-by-step instruction

To connect Tricolor without a dish, you must perform the following steps:
Check whether the “Unified” channel package is active: if the subscription is not activated, connecting to the Internet is impossible.
Check the receiver software: the receiver should have latest version software; update it if necessary.
Connect the receiver to the Internet using a special cable.
Usually there are no problems connecting the receiver to the network. However, if the equipment is outdated or the router has any special settings, Tricolor without a dish will not automatically connect. If this does not happen with a cable connection:
enter the network settings menu and select the “Auto” mode;
enter the network settings menu and specify the parameters manually, if necessary, check with your Internet provider.
At wireless connection You will need to log in using your ID, after which the receiver will connect to Wi-Fi automatically.

Features of setting up channels without a dish

If Tricolor without a dish connects automatically, all that remains is to select the broadcast source. On the channel there is a corresponding tab in context menu– you must select “Internet”. When you select a broadcast source in the channel menu, the changes will be saved.
The broadcast source can be specified in the “Settings” menu through the “Broadcasting” tab. After switching to it, the “Broadcast Source” tab will open, where you will also need to select “Internet”. The default settings are always “Satellite”. If the broadcast source was selected through advanced settings, then nothing changes in the channel settings.

Which tuners will be able to receive Online TV?

The possibility of installing Tricolor without a plate is provided in the latest models receivers, which can be viewed via the link in the ““ section. Information about them is regularly updated on the operator’s website, as the system is constantly being improved and adapted to the equipment. When connecting the Tricolor Online package without a dish, pay special attention to the special receiver model - GS AC790, which combines not only the function of watching TV via the Internet, but also a game console.
If you have several TVs in your home, you need to connect the main receiver to the Internet.
If your equipment does not support Tricolor Internet broadcasting without a dish, you will have to replace it with a new one to use the option. On this moment there is a promotion for the exchange of Tricolor TV equipment - “ “.

Cost of setting up and connecting the Online TV function

If you already have a satellite dish installed and the “Unified” channel package is active, you can connect and set up Online TV channels completely free of charge. If the standard channel package is not active, to operate Tricolor without a dish if you have an Internet connection, you just need to pay for a subscription. The minimum cost of subscription to the “Unified” channel package is 1,500 rubles per year.
For subscribers who do not have the opportunity to install a satellite dish, an Internet version of the Tricolor Online operator is available with a package of 134 channels at a price of 2,000 rubles per year.

Pros and cons of Tricolor TV without a dish

Tricolor without a plate gives subscribers the following advantages:
free additional TV channels previously available for viewing on a paid basis or in certain regions;
the ability to use the receiver anywhere there is an Internet connection;
independence from weather conditions and other external influences to which it is sensitive satellite connection;
TV archive, content rewinding and other interactive TV functions.
The main disadvantages of Tricolor without a dish are the inability to use old models of equipment, as well as the direct dependence of broadcast quality on Internet speed. However, these technical issues are easily resolved.

Not so long ago, to view any satellite channels, you required not only a special antenna, but also a receiver, which is a receiver. Today, thanks to the latest developments, you can view Tricolor channels without it. Most modern TVs already have a built-in tuner that supports the necessary standards, as well as a slot for the CI module. Correct setting The antenna allows you to receive operator signals, so a receiver set-top box from the Tricolor provider is not required.

Antenna connection and module installation

To watch Tricolor TV channels, the antenna is connected to the F-connector, which is located near the regular terrestrial antenna.

This option has several advantages:

• minimum number of wires;
• All you need to control is the TV remote control;
• no need to look for a place to install the receiver;
• no need to buy a satellite receiver.

To decode Tricolor channels, it is enough to install a special smart card, as well as a module, without which you can watch only the minimum number of channels that are open. Removing or installing a module is carried out only when the equipment is turned off. The CAM module with the card is mounted in the PCMCI slot, with the barcode facing the screen.

TVs that already have DVB-S2 tuners installed are able to support these modules. They are a device in which a Tricolor card is installed and the whole thing is inserted into the connector from the TV. After the module is installed, the cable is connected and the TV itself turns on in search mode. In the menu, the satellite signal transmission source is set and the channel search begins. The system detects channels and remembers them, but in this case only information TV channels are open. These actions are carried out to check the functionality and compatibility of the module and the TV.

The next step is to register the agreement and activate the access card without a receiver. The procedure is carried out on the official website of the Tricolor TV provider, where a package of channels is selected, the card and contract number are entered. In this case, CI+ is placed in the field labeled “Terminal model”. This application is sent for subsequent verification and registration with the operator's company. During this time, the TV must remain on any encrypted channel of the selected package. Automatic connection occurs within two hours.

Module and manual configuration

The Tricolor module, which works without a receiver, allows subscribers to view channels at any time. It is a kind of replacement for additional equipment. However, in this case there is one main condition - the presence of an appropriate connector on the TV. IN modern TVs he is always present. You can determine the location of this connector using the instructions from the TV. The satellite channel operator allows you to view channels through the module in HD format High Quality or digital SD.

To manually tune Tricolor channels without using any receiver, you need to enable manual tuning on the TV in the corresponding menu. You also need to set the modulation parameters - QAM 64. The transmission speed should be 6900 KS/S, after which the search starts. This procedure is also produced for frequencies from 144000 to 394999KHz.

Main purpose of the module

The module used in the TV has several important purposes:

• it allows you to decode channels;
• protects against unauthorized viewing attempts;
• transmits a high-quality signal;
• saves space;
• reduces power consumption due to the fact that there is no receiver.

Due to its features and easy installation, it is now becoming increasingly popular. It can simultaneously decode one radio signal or Tricolor TV signal. However, the system itself can only support card identification numbers that have fourteen digits.

In addition, the presented map ensures correct operation when viewing the “Optimum” package. You can purchase the module in the official store of the satellite television operator Tricolor TV with various configuration options. You can also order various satellite equipment and necessary services here.

Best operator in Russia

Tricolor can rightfully be called one of the most modern operators in Russia, which tries in every possible way to offer its subscribers only the best services favorable prices. The choice of packages is actually small, however, each of them includes a large selection of different channels for children and adults. We are very pleased with the affordable prices for the packages offered - you just need to pay from 150 to 900 rubles once a year and you don’t have to worry about anything. For a low cost, each subscriber will be able to watch their favorite TV shows and movies in the highest quality.

Tricolor TV has been operating for more than fifteen years and offers customers a variety of equipment and service support. And now customers can take advantage of a completely new and very convenient service for watching satellite channels without additional equipment - they only need to purchase a module that is inserted into the TV. There is nothing superfluous - no waste of money, no wires, no unnecessary equipment. Subscribers have only one thing left to do - enjoy a high-quality signal and a wide variety of channels from Tricolor.

In most apartments and even private houses within any even small city, there are now almost no problems with the quality of television signal reception, since cable television is installed almost everywhere. Most apartment buildings in cities with a population of over a million may have several cable TV operators, which gives residents a pretty good choice.

But as you move away from the city center, the availability of high-quality cable TV gradually disappears. And outside the city, as a rule, cable TV completely absent.

Therefore, most summer residents are content to watch at most a few channels of terrestrial television, which they can catch on. Moreover image quality often leaves much to be desired. Especially if the summer cottage is located far from the emitting terrestrial television station, then on the TV screen you can see a lot of interference from “snow” to “stripes” and black and white instead of color.

In most of Russia terrestrial television is still being transmitted to analog format. This method of signal transmission has one significant drawback: the signal-to-noise ratio drops significantly with distance from the emitter.

With distance from the television center, noise (interference) begins to dominate more and more over the main signal. This is precisely what manifests itself in the appearance of “snow” on the screen. If the cottage or village is very far from the transmitting station, then the noise will eventually interrupt the signal completely, and It becomes impossible to watch a TV channel at all.

Now the country is introducing the transmission of TV signals in digital format, and over time it is planned to completely abandon the transmission of television programs in analogue format.

What is the advantage of digital TV over analogue?

Transmission of a signal “digitally encoded” compared to direct transmission in analog format gives several advantages:

• Increasing the noise immunity of transmission and recording paths of television signals.
• Reducing transmitter power.
• Significant increase in the number of TV programs transmitted in the same frequency range.
• Improving image and sound quality in TV receivers.
• Creation of TV systems with new standards of image decomposition (high-definition television).
• Creation of interactive TV systems, when using which the viewer has the opportunity to influence the transmitted program (for example, video on demand).
• Function "To the beginning of transmission".
• Archive of TV programs and recording of TV programs.
• Transmission of various additional information in a TV signal.
• Select a language (more than the usual two) and subtitles.
• Extension functionality studio equipment.
• Possibility of adding radio to multiplexes

But there are also some flaws:

• Fading and scattering of the picture into “squares” when the level of the received signal is insufficient, the data is either received with 100% quality or restored, or is received poorly with the impossibility of restoration.
• Almost complete signal fading during thunderstorms.
• Even a transmitter with a power of 10 kW and a transmitting antenna height of 350 m provides reliable reception at a distance of 50 km, and as a result, the need for a larger number of transmitting centers than with analog TV (more frequent placement of transmitting antennas).

Since we are discussing from the point of view of an ordinary user mainly only image quality, then we can highlight only one main feature of digital terrestrial TV over outdated analogue:

Digital TV is very resistant to interference. To do this, the signal is encoded with some redundancy. The digital tuner will output perfect picture even in the presence of a lot of interference. And it will do this until the signal-to-noise ratio drops to a minimum, when the signal arrives at the very edge of the equipment’s capabilities.

That is, in analog broadcasting, as the signal level drops, you will see the picture worse and worse. In digital broadcasting, you won't notice the signal drop until the tuner is no longer able to recover the lost pieces of the image, and it "disintegrates into squares" and then disappears completely.

Types of digital television

Based on the transmission channel, digital TV can be divided into four types:

• Cable (DVB-C)
• Terrestrial (DVB-T2)
• Satellite (DVB-S)
• Internet TV (IP TV)

We will not consider cable TV and IP television in the country due to their great rarity. But satellite and terrestrial digital television broadcasting in the countryside is relevant.

Moreover, satellite DTV has been used by consumers for quite some time, and in particularly remote areas there are no alternatives to it at all. We will look at it in our separate article.

But on-air DTV began to enter the lives of gardeners and summer residents relatively recently. Let's talk about him in more detail today.

Terrestrial digital television in the country

The terrestrial digital television network in the Russian Federation is still in the process of construction and currently available mainly near large cities. But it already covers a significant part of the dacha areas. Therefore, the issue of connection has become very relevant lately.

How to connect to terrestrial DTV?

If you want to try connecting digital television at the dacha, first you need to determine does your site fall within the coverage area of ​​one of the DTV transmitting antennas?. The location of the site will determine how your TV receiver will pick up the digital signal.

Most reliable way To find out, ask your neighbors in your dacha area; perhaps some of them are already watching TV channels in digital form. Then you can be completely sure that “the signal is reaching you.”

If no one in the area has yet heard of digital TV, then you need to try to find out whether your site falls within the boundaries broadcast radius of a local emitting DTV station.

Coverage area

The broadcast radius of a DTV station usually lies within 20-50 km, depending on the terrain and building density. On average about 30 km is reliable reception zone.

Each region has its own local organization - DTV operator, which is responsible for building and maintaining the network. On their website you can usually see the locations of broadcast stations and even coverage maps. Or you can get information from them by phone or written request.

The DTV network in the Russian Federation is being built by the Federal State Unitary Enterprise Russian Television and Radio Broadcasting Network.

Each region has a division of this organization.

You can call and find out everything by phone numbers in your region from the page.

If you are lucky and you find out that your dacha is located in the digital broadcast zone, then it’s time to decide necessary equipment for DTV reception.

Equipment

So, you already have a TV in your dacha, a plot in the DTV broadcast zone. Let's start installing digital television at the dacha. What else is needed to receive a signal? At a minimum you need an antenna.

Antenna for digital television reception

Universal HF/UHF antenna for digital TV reception

If a digital TV tower is nearby, then it is enough indoor antenna. I will say even more, I personally confidently caught a DTV signal in the city of Ufa on a meter-long piece of wire.

If the signal level is not so ideal, then you will need to install an antenna at your dacha to receive digital channels. Nowadays, most antennas on sale are well suited for this, since they support reception of signals in the decimeter range (UHF/UHF).

For example, you can install the antenna “GAL”, “Locus”, “Zenith”, “Meridian”, “Ether”, etc. I bought my antenna in Auchan for 1000 rubles.

If you know the exact location of the DTV tower, then everything is simple: point the antenna on her and that's it. Usually this is enough to catch a signal and watch digital TV without problems.

If the exact direction is not known, then you need to gradually rotate the antenna until you find the best position. Majority digital set-top boxes have signal level and quality indicator, which is displayed on the TV screen and from which you can find the best antenna position. This is usually done by two people: one person rotates the antenna, the second monitors the signal level.

When you have found the maximum possible signal level and the antenna is installed in the desired direction, you need to search for channels on the set-top box.

Setting up digital television at the dacha

The easiest way is to find the “Auto search for channels” item in the set-top box menu, and then the set-top box will do everything itself: it will find all available digital channels and number them in order.

List of digital terrestrial television channels

Now the interesting part: what channels does digital television show for free??

Since my dacha is in the suburbs of Ufa, and I am writing from my own experience, it means that I am considering digital terrestrial television in Ufa. But as far as I understand, list of channels throughout Russia will be the same with rare exceptions, so the information will be useful to everyone, and not just residents of Bashkortostan.

At our dacha the DTV shows 20 channels: 10 at each multiplex.

List of digital television channels

Here full list channels in Ufa:

1	"First channel"
2	"Russia 1"
3	"Match TV"
4	"NTV"
5	"Petersburg-5 channel"
6	"Russia K"
7	"Russia 24"
8	"Carousel"
9	"Public Television of Russia"
10	"TV Center - Moscow"
11	"REN TV"
12	"SAVED"
13	"The first entertainment STS"
14	"Home"
15	"TV-3"
16	Friday
17	"STAR"
18	"WORLD"
19	"TNT"
20	"Muz TV"

I hope I helped you understand all the nuances of digital TV. If you have any questions, write, I will definitely try to help you.

More recently, connect home TV To watch television channels from a satellite, it was only possible to use a dish antenna through a special receiver - a satellite receiver. Is it possible to get satellite TV without a dish and without a receiver?
It is now possible to view satellite TV without receiver. Many modern TV models have a built-in digital tuner that supports the DVB-S2 standard, and a special slot for installing a CI+ access module. If you have a connected and correctly configured satellite antenna, the TV receives signals from the satellite operator and allows you to watch satellite TV without a receiver set-top box. The antenna cable from the satellite dish must be connected using an F-connector to a special antenna input located next to the input of a regular terrestrial antenna.

Of course, this connection is convenient for several reasons:
1) There is no need to purchase additional device- satellite receiver.
2) There is no need to free up space in the interior to install it.
3) To view, you only need one television remote control, not two. This is much more convenient to use - you don’t need to grab different remote controls, and besides, they have the ability to get lost and fail.
4) The number of wires connected to the TV is reduced.

produced by many well-known manufacturers of television equipment: Samsung, LG, Philips and others. The external difference between a satellite receiver on a TV is the presence next to the input of a regular antenna, another antenna input with threaded connection for F-connector. However, the presence of a second tuner does not always mean the ability to connect a satellite dish. The same input is used to connect DVB-T digital terrestrial channels or DVB-C cable channels. Only presence in the TV characteristics DVB-S tuner or DVB-S2, means the ability to receive satellite television channels. Often, such an antenna input is combined for all types digital signal and is designated DVB-T/T2/C/S/S2. The S2 standard is more modern, but TVs with a built-in satellite receiver of the S standard receive both standard and high-definition HDTV signals.

To decode channels you need a CAM module and an access card. Without this module, it is only possible to view an extremely limited number of channels broadcast without encoding in the public domain. All TVs with a DVB-S2 digital tuner support CAM modules - a device into which a satellite television operator card is inserted, and which in turn is inserted into the PCMCIA connector of the TV.
After installing the module, you need to connect the cable from the satellite dish to a special socket on the TV using the F-connector. Next, you need to start the TV to search for satellite channels.
In the TV menu you need to select the input signal source: terrestrial TV, cable TV, satellite - put a tick in the appropriate box. We search for satellite channels on all frequencies. The TV finds a large number of channels and stores them in its memory, while only information channels are open for viewing. At this stage, the functionality of the module inserted into the pcmcia slot and the compatibility of the CI+ card with the TV are checked.

Next, you need to register the agreement and activate the purchased conditional access card. On the provider’s website, you need to select a package of television channels, enter the contract number and smart card number. In the "Terminal Model" field, you must select CI+.
After submitting your registration application, you must leave the TV on one of the encrypted channels of the program package you have chosen. The connection occurs automatically within two hours.

TV with two satellite receivers

TV models with two satellite receivers allow you to simultaneously view two satellite television channels in PIP mode, or record one channel while watching another.
To watch a satellite channel and simultaneously record another channel, you need to connect two identical cables from the satellite dish to the TV directly without a receiver. Connect the first cable from the satellite dish directly to the SAT 1 connector, and the second - to the SAT 2 connector. To do this, use a coaxial cable with an appropriate F connector. Before starting installation, check the location of the satellite dish. During satellite installation, select Dual Tuner mode.

Manually tuning your TV to satellite channels without a receiver

To manually tune satellite channels without a receiver, you need to select MANUAL TUNING and DIGITAL CHANNEL on the TV remote control in the MENU section. In the FREQUENCY parameter, enter the value 144000 KHz, in the MODULATION parameter enter the value QAM 64, in the TRANSMISSION RATE parameter set the value 6900 KS/S. Search for channels.
This tuning procedure must be repeated for frequencies 122000, 130000, 138000, 154000, 162000, 298000, 394000 KHz.

CAM module Tricolor

CAM module Tricolor allows you to view satellite channels on modern TVs with a CI slot. Thus, it replaces the necessary additional equipment - a digital receiver, a tricolor card is inserted into the TV as into a satellite receiver. An additional condition for viewing satellite channels without a receiver is the presence of a DVB-S/S2 digital tuner in the television receiver. Such a tuner is installed in almost all modern mid-price TVs currently produced. You can check this using the technical specifications in the TV's operating instructions. The Tricolor CAM module allows you to receive broadcasts both in standard SD digital quality and in high quality HD television image format.

It has the following purpose: decoding MPEG2\4 TV channels protected from unauthorized viewing by the operator's conditional access system. The Tricolor CI+ module is Plug and Play, its installation is simple and straightforward. With its help, one television or radio channel of Tricolor TV is decoded simultaneously. The system supports only 14-digit identification numbers of the Tricolor TV smart card of the form xx0245хх…xx

Satellite TV without NTV plus receiver

Set satellite TV without receiver NTV+ allows you to watch NTV plus satellite TV channels on modern TVs. A prerequisite is the presence in the television receiver of a DVB-S2 digital tuner and a special Common Interface CI+ slot into which you must insert an NTV card. Thus, there is no need for a special satellite receiver; it is enough to install a special dish in the satellite visibility range, set to position 36E. Then you need to insert a CAM module into the TV slot with a conditional access card installed in it, and enjoy watching NTV satellite channels.

How to set up satellite TV on your TV?

How to set up satellite TV on your TV ELENBERG? There is a socket for connecting a dish, but I can’t even find instructions for it anywhere.

We are often approached with this question, and, as a rule, it is the owners of televisions that are not among the well-known brands. Such devices can receive regular television channels quite well and have acceptable image parameters. But the presence of a satellite tuner does not mean the possibility of stable reception of this type of signal.
Television operators transmit signals on different channels and with different technical characteristics: for reception on S or S2 tuners, using different versions of the CI module, with different data flow rates. For stable reception of modern television from a receiving antenna directly, without a receiver, it is necessary that the TV has the following parameters:
Availability of digital built-in satellite tuner DVB-S2.
Availability of an interface for connecting electronic modules CI new version CI+ (CI Plus).
Correctly working required software Latest software.
Supports signal bit rate of 45000 MHz. The conditional access card must be placed in the module so that the chip faces in the direction opposite to the barcode sticker on the CAM module.
Insert the module with the card installed into it into a special slot on the pcmci TV with the barcode to the screen. Installation completed.