iPhone 5s volume up button not working. iPhone repair if volume up buttons don't work. Remove the film covering the camera base mount

The iPhone is one of the most reliable phones of our time, but even it can break. You may notice that switching to silent mode and back will happen every once in a while. Or even the Mute switch will move without resistance, and mode switching will not occur at all.

In this case, normal use of the iPhone will be difficult: if the call sound is turned off, you may miss an important call, and the inability to turn on silent mode can lead to an unpleasant situation due to a loud ringing during a meeting or other official event.

Why doesn't the mode switch button work?

There are several possible failure options:

• button malfunction;
• loop malfunction;
• vibration motor malfunction;
• electronics malfunction.

The simplest option is a faulty button. It can malfunction due to dust or liquid ingress, as well as due to normal mechanical wear. In the first case, it is enough to rinse and clean the button, but in the second, it will need to be replaced.

It's more difficult to deal with the loop. On the one hand, the breakdown may be simple (lost or oxidized contacts), but on the other hand, the conductor inside the loop may break.

A vibration motor malfunction is rare, but it can also fail due to liquid getting inside or due to an impact from a fall. The vibration mode will not work. In this case, the vibration motor must be replaced with a new one. But the most difficult is considered to be a burnt microcircuit. If it is easy to replace a button or cable, then the microcircuit will have to be unsoldered.

How can I fix the Mute switch?

In simple cases, you can fix the problem like this: disassemble the iPhone, wash the contacts of the button and cable, if necessary, order a new spare part and replace it.

But to do this work, you need to have at least basic experience working with complex equipment, otherwise you can simply break the latches or even order a spare part from a different model. There is also a risk of buying a non-original part with a short service life. Well, replacing a microcircuit will require the use of a soldering station, so this operation is not carried out at home.

Therefore, it is better to turn to professionals, such as the employees of our Total Apple service center. We can repair any Apple gadget. At the same time, we use exclusively original spare parts, therefore we provide a maximum warranty period (3 years) for both parts and labor.

Have the volume buttons stopped working on your iPhone? This type of problem causes a lot of inconvenience when using the device. Below are detailed descriptions of the volume key repair processes.

Possible causes of failure

• Dirty keys are a trivial, but most common reason. Over a long period of use of the phone, fine particles, dust, etc. may get into the holes between the keys and the case. Due to contamination, the keys work, but are pressed only 2-3 times. To clean the buttons, it is better to use an alcohol solution and a cotton swab;

• The button may not work correctly after replacing the top cable of the system board. This is explained by inaccurate connection of the cable (the volume up/down contacts could short out). In this case, only replacing the keys will help;
• Virus software that interferes with the operation of certain functions of the operating system;
• If a malfunction occurs after an iPhone is hit or dropped, this requires replacing the volume increase mechanism;
• Presence of liquid in the housing;
• Crash after OS update.

The key is pressed, but the sound is not adjusted

If, after pressing the volume control, a ringer window appears on the screen, but there is no volume level indicator at the bottom, the problem is not a failure of the mechanism, but a failure of the operating system.

First, try to fix the software problem in the simplest way - reboot your phone (soft reset). As a rule, this procedure allows you to eliminate third-party processes that interfere with the operation of standard iPhone components. If nothing has changed after rebooting, try pressing both parts of the volume key at the same time. Repeat the action 3-5 times. This may help restore normal operation.

Check for available updates. A new build of configuration parameters solves the problem in 90% of cases. Also try resetting your phone to factory settings.

Until the key mechanism is replaced, you can use the Assistive Touch function, with which the desired button will appear on the desktop screen. To enable the option, go to Settings - General - Assistive Touch and move the slider to the “Enabled” position.

Replacing the volume control keys

Did all the above methods not help? In this case, we can say that the iPhone volume button does not work due to a breakdown of the mechanism or due to shorted contacts. Replacing a key is quite simple and you can do it yourself by following the instructions:

• Prepare tools for disassembling the iPhone (a set of screwdrivers, a plastic spatula, tweezers, a suction cup, a new volume increase mechanism);
• Open your device. Then unpin back cover from the display. Remove the Phillips screws shown in the figure from the battery connector plug. Disconnect the battery cable and remove the battery;

• Find the volume control cable and remove its plug by unscrewing the screws shown in the figure:

• Disconnect the top cable bracket from the phone;
• Unscrew the screws with the bracket contacts;
• Remove the contact holder;

• Lift the volume control cable connector with a flat spudger;
• Remove the following screws:

• Remove the button switch mechanism using tweezers. At this stage, you can try to clean the component; perhaps it is not broken, but simply clogged;
• To replace the keys, carefully remove them with tweezers. This tool prevents damage to the button membrane;

Replace components and reassemble the device to its original condition.

If the volume button on your iPhone does not work (for example, it gets stuck), do not rush to take your phone to a service center. Before finding out the cost of repairs and paying for replacement buttons (switching to silent mode or adjusting the volume), find out the cause of the problem and try to fix it yourself.

Main causes of malfunctions

Initial diagnostics of the device can be done at home. If the volume button on the iPhone does not work - you do not hear a characteristic click, you feel that the mechanism is loose - most likely the reason is mechanical damage. Shocks and falls easily damage cables, screen, system board and other buttons (volume, lock, turn iPhone on and off, switch to silent mode). Often, the smartphone not only does not switch to silent mode, but even stops turning on altogether after strong mechanical impact.

Often problems with iPhone occur due to liquid spillage. Penetration of moisture into the housing leads to serious consequences. It is important to dry the phone in time, clean the contacts and tracks, and prevent corrosion, otherwise there may be problems not only with the sound.

The “Volume” (decrease and increase volume), “Power” (turn on and off) and “Mute” (mute, switch to silent mode) buttons do not always break. In some cases, they stop working due to software glitches. For example, when you install unlicensed software on your iPhone or the firmware does not work correctly.

Signs of trouble:

• the button is broken and does not respond
• Volume control (decrease, increase) does not work
• the button gets stuck and works irregularly

If you are sure that the buttons do not work due to a manufacturing defect, immediately contact your Apple retailer or an authorized service center. In another situation, try to solve the iPhone problem yourself.

Troubleshooting software and adjusting settings

When diagnosing a device, you should pay attention to iPhone settings– the phone may be working in silent mode. It is also possible that recently installed application causes blocking. Then you should do a hard reboot:

• Press “Power” and “Home” at the same time (on the iPhone 7 this is how the on/off and volume buttons work, if the latter is not broken)
• hold them until the phone turns off and the Apple logo appears

As a last resort, go through the iOS recovery procedure through iTunes.

Where to go for repairs

Contact a specialist immediately if the software is working properly, but the mechanism for adjusting or turning on the silent mode has stopped working due to mechanical damage or flooding. When warranty periods broken, there is no need to waste time on a trip to the service center - it is much more convenient to call a specialist at home.

Currently, there are very few phone models left with push-button control. Manufacturers in general have long switched to touch controls. However, there are still push-button models on the market, for example, the so-called “granny phones”. But we will not talk about this line of devices, because the topic of our material is the volume buttons on the iPhone, or rather, what to do if they (or one of them) do not work? Where can I go with this question? How much might it cost to correct the current situation? How to avoid breakdowns of this kind? We are ready to tell you about all this further.

So, first of all, it’s worth saying that since the volume buttons on your smartphone are mechanical, you should be prepared for them to wear out. The volume up and down buttons are the most commonly used buttons on your phone. Music, ringer volume, notification volume - all this changes regularly and constantly, and this is exactly what the above buttons help us with.

The volume button on an iPhone may either not work, only work every once in a while, or become stuck. There can be many reasons for this. Mostly they are mechanical in nature and very rarely there are fights at work software. If we talk about mechanical reasons that can lead to this kind of trouble, it is worth highlighting the following: dust and dirt getting under the buttons; damage caused by impacts and falling of the phone; any liquid entering the housing. If we talk about software failures, the symptoms may be as follows: when you press the volume button, some other task is performed, for example, an application with a camera opens; the keys can also work every other time; A notification may appear indicating that you need to download something for normal operation.

As you can see, there may be several reasons and the symptoms may vary. If such a problem has happened to you, you are in the city of Bryansk, look for where you can turn for help, we will be happy to help you! Volume button on iPhone not working? Does it stick? Jammed? We are ready to help you in the shortest possible time.

First of all, it is necessary to identify the cause of such a breakdown, that is, why it happens. It is unlikely that you will be able to do this on your own, as they say, at home. Moreover, the manufacturer strongly does not recommend doing anything with your own hands! This can lead to even more serious damage, and not a relatively simple case when there are difficulties in operating the sound control buttons. You should definitely contact a workshop where the device will be diagnosed and the cause of the failure will be identified. After diagnosis, our specialist will tell you what exactly happened and how much the repair will cost. If you agree to repair, the diagnostics will be free for you!

So, if you have any difficulties in operating your iPhone, you are looking for a reliable service center in Bryansk, where they will give an official guarantee for repair work, we will be glad to see you!

Your volume is too loud or too soft and you want to adjust it, but one or both of your volume buttons refuse to work. This could be a sign of a major hardware problem (Yikes!) or a minor software glitch. Give the tips below a try before you squeeze your iPhone to death. Here are some quick ways fix iPhone volume button not working.

Fix iPhone Volume Button Not Working

1. Reboot your device

Turn off your iPhone using the Power button. This usually works for most issues that may arise with your device, so try this first to see what's going on.

2. Press your Volume Up & Down buttons repeatedly

Firmly press your Makeup & Volume Down buttons several times. Make sure you both take turns. If your volume indicator is popping up on your screen – This means that it is most likely a loose connection inside your iPhone. This may also fix the problem, but if problems persist, you should see your local tech gurus or contact Apple.

3. Squeeze him

It's also a great reliever, but if you squeeze too hard you could damage your iPhone. Using your hands of dominance, simultaneously squeeze your finger on the top corner of the device while pressing down on one of the volume buttons. Do this a few times and see if the volume indicator shows up on your screen. This may be a temporary fix. If you see the button starts working again - your phone may be experiencing a loose connection internally.

4. Give it a little tap

You don't need to swing your device like Thor's hammer, but soft pressing on the top left corner of your device against a hard surface (table) may help you.

5. Assistive touch

NOTE: This will not fix the problem, but will allow you to adjust the volume of the device. To do this:
1. Click the "Settings" button.
2. Select General.
3. Then “access”.
4. Turn on Assistive Touch.

Select Volume up or down as needed.

6. iOS update

If you're not up to date iOS version You can update by following these steps:
1. Connect your device to a power source and a Wi-Fi connection.
2. Click the Settings button.
3. Select General.
4. Select Software Update.
5. Click “Download and Install” if this is for you.
This should solve your problem and for sure it was a software issue and not a hardware issue.

7. Reset your device

A hard reset can also fix this problem. To do this, hold down the Home and Sleep/Call buttons simultaneously until the Apple logo appears.

If none of these tips are able to fix the iPhone volume button not working then it is likely a hardware problem that requires help from Apple. If you are still under warranty, you may be able to get a new device.