Firmware update for Samsung Galaxy smartphones. Installing official firmware on Samsung Galaxy S4 I9500 Custom firmware for Samsung S4

Note that this instruction mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself.

The new update file for your device is version I9500XXUFNB3 Android 4.4.2 KitKat, and the build date of this firmware is February 13, 2014.

If you still want to take the risk and manually update your smartphone rather than wait for an OTA update notification, then you can use the guide below. First, read some information to prepare for flashing:

• Use the instructions only for the Galaxy S4 GT-I9500 model;
• Do not try to update any other smartphone with this firmware;
• Galaxy S4 GT-I9505 LTE will also soon receive official update and therefore follow our news;
• Make sure you have downloaded and installed the official Samsung USB drivers on your computer;
• Disable on your computer Samsung program Kies, as it will block manual flashing;
• You will need the Odin program if you were unable to update your Galaxy S4 using Kies;
• Disable any anti-virus software while flashing your smartphone;
• Enable USB debugging in Galaxy settings S4. To do this, you must open the developer settings options: open Settings/…/About device, find the build number and tap on this line 7 times. Then enable USB debugging.
• If your smartphone is flashed with custom firmware, then you will have to completely erase the system partition;
• If your Galaxy S4 is 100% stock, then you don’t have to worry about losing information;
• Before installation new firmware delete MicroSD card from Galaxy S4;
• Do it just in case backup data from installed applications, SMS and other data using Helium for Android or any other similar software;
• Sync contacts and data with your account Google entry default;
• Check your phone's battery charge and make sure that the battery is at least 50% charged so that the phone does not turn off in the middle of the installation process;
• This guide is intended for advanced users, but in any case we are not responsible for all consequences, be it the loss of personal data or the smartphone getting bricked.

I think this is enough to get you ready to install the official Android 4.4.2 reset on your Galaxy S4 GT-I9500.

Instructions: how to flash Galaxy S4 GT-I9500 with official Android firmware 4.4.2 KitKat:

• Download the I9500XXUFNB3 firmware file from this link: SamMobile. We remind you that you must have a registered account with SamMobile, otherwise you will not be able to download anything. Registration will take about two minutes.
• After you download the firmware file, extract everything from the archive into a separate folder and save it to the desktop on your computer.
• Download Odin3 v3.09 from this link. Extract all the contents and also save them in a separate folder on your computer.
• Turn off your Galaxy S4.
• Boot your Galaxy S4 into Download Mode.
• Launch the Odin program on your computer.
• Connect your Galaxy S4 to your computer with via USB cable. Wait until Odin recognizes the connected device. If this does not happen, then reinstall the drivers.
• Next, click on the AP button in Odin and mark the file with the extension .tar.md5 that you received in step 2. This is the firmware file that you need.
• Make sure all settings in Odin are set to default.
• Please note that the Re-Partition option is unchecked.
• Press the START button and wait until the update is installed.
• After this, your smartphone should reboot and you will see that Android 4.4.2 KitKat has successfully booted on your Galaxy S4 GT-I9500.
• Disconnect your smartphone from your computer.

If your Galaxy S4 rebooted successfully and the interface works fine and there were no problems during the installation process, then you can close this article. If problems arise and the update installation process has not been completed, we offer some tips below.

Tip 1: If Odin freezes or a FAIL warning appears, then you should repeat all the steps in the instructions from the beginning until you install the update.

• turn off your smartphone and remove the battery.
• close Odin and make sure your phone is disconnected from your computer.
• Boot your smartphone into Download Mode, launch Odin and repeat the instructions again.

Tip 2: If Odin says the flashing process has completed successfully, but the phone cannot boot to the start screen, then you will have to do a “Factory Reset”. This will destroy all data on the system partition, but then you can boot your Galaxy S4 normally.

• Turn off the phone, remove the battery and make sure it is not connected to the computer.
• Boot your Galaxy S4 into recovery mode.
• select “wipe data/factory reset”.
• return to the main menu of recovery mode and reboot the device – Reboot now.
• wait until the phone is fully loaded and enter your details account Gmail.

Hello everyone, in this post I will show you how you can flash (update the software or reflash), get root rights (rutting or unrooting), install CWM (custom or non-factory recovery) and perform a hard reset on your smartphone Samsung Galaxy S4 GT-I9500 16Gb.

It so happened that I had to use it for a whole week for work. If you compare it with mine, I practically didn’t notice the difference, it’s also dumb in stock, there are also a lot of applications that are useless for me, but there is one thing - the build quality of mine is better.

And so, when updating the software, I will use the usual factory firmware latest version from Android 4.4.2 , in this article I will not install custom (modified by other “specialists”) versions of firmware for the reason - well, I don’t like them. I had non-official firmware on my SGS3 for about six months - I didn’t like it. It is clear that people make them “for themselves.” I put the stock one back and rooted it. Everything suits me. I need ROOT rights to remove all applications I don’t need and to install programs that need these privileges. I won't go into detail about this. In the following articles.

In terms of operation, I can only say one thing - the most important problem this phone This is the battery - it has swollen this week. This is a factory defect (or rather a miscalculation). When in use, its consumption is 0.7 amperes and therefore, with prolonged use, the first batteries could not withstand such a load. And one more moment that I didn’t like - towards the end warranty period, if you do not use a cover, the paint may peel off from the rim. In the Chinese this is almost a rarity, but here the device costs a kilobuck at the start of sales. This problem could have been solved. Okay, enough of the rant and let's get started. Everything is in order.

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Preparation for firmware and other actions.

To start flashing your smartphone, you must first prepare. The preparatory stage does not take much time, but it allows you to do everything without any problems. Everything needs preparation.

• As usual, I first recommend charge the battery , preferably one hundred percent, but half is enough too. But it’s better not to risk it and put the phone on charge and wait for it to finish;

• For firmware we need a regular microUSB cable , which is included with the device. Check the phone and cable connectors for serviceability and the absence of dirt and traces of oxide. Otherwise, the device simply will not be detected by the computer and will not be flashed;

• Drivers are installed along with KIES -om or you can install it separately - there are installation instructions and the file itself;

• Stitcher - Odin3 v3.07 ;

• Firmware - I9500XXUGNG3 . In the examples I used this version, although this moment updated. But the main thing is not to show you the process of changing software. Latest firmware version I9500XXUHOD4 is in the files - it is relevant at the moment;

• CF-Auto-Root-ja3g-ja3gxx-gti9500 - file for obtaining root rights;

• philz_touch_6.00.8-i9500 file for installing custom recovery;

• Personal computer or laptop - a simple computer with winXPwin7win8 on board will do;

• You've probably already thought about where to get all this software - at the end of the post you will find the answer to this question.

Samsung Galaxy S4 GT-I9500 - drivers.

There are several ways to install drivers for Samsung devices. I use only two - the first is to install a synchronization program with a computer called KIES. You can download it on the official SAMSUNG website completely free of charge and it is always the latest version. Look for it on the model page in the technical section. support. I told you how to install it. If you already have it installed, then you can skip this part of the post and go straight to the firmware. If not, it is better to install the drivers separately. Now I will show you how to do this.

Step 1:Download and run the file named SAMSUNG_USB_Driver_for_Mobile_Phones.

Step 2:The installer will launch. Click the NEXT button.

Step 3:Select your country and language, and then click NEXT.

Step 4:Select a disk location for installation or leave everything as is and click the INSTALL button.

Step 5:The process of copying files and installing drivers.

Step 6:The installation is complete, click the DONE button to exit the installer. Now you need to connect the turned on smartphone to the computer with a cable and wait for the system to automatically detect it.

Standard software update.

This part will show how to flash this device with standard or factory software. This method absolutely legal and safe for both the warranty and the hardware of your smartphone. It is also very simple and you will cope with this task the first time... I am sure of it. But before you start doing anything SAVE ALL IMPORTANT AND NECESSARY INFORMATION FROM YOUR PHONE TO A MEMORY CARD OR OTHER INFORMATION CARRIER, OTHERWISE YOU WILL LOSE EVERYTHING, AS IT ALL WILL BE DELETED. Let's get started.

Step 1:Before flashing the firmware, you must enter the phone into DOWNLOADING mode. This is done like this - press the volume button down (decrease sound) and without releasing it, press the HOME button (at the bottom on the front part there is one there) and immediately the power button, hold them down until the WARNING!! warning appears. Here we are warned about the risks of flashing firmware. If this doesn’t scare you, press the volume up button to continue. If you still change your mind about continuing, press the volume down button (volume down) and the phone will reboot. But I hope that you are not one of the timid ones, so let’s continue.

Step 2:If a green android appears, then you did everything right. This is download mode.

Step 3:Now you need to run the flash driver. Go to the Odin folder and run the Odin3 v3.07.exe application.

Step 4:This is what it looks like when it's running.

PIT -JA3G_EUR_OPEN.pit

Bootloader- BL_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PDA- AP_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PHONE- CP_I9500XXUGNF6_2068929_REV00_user_low_ship.tar.md5

C.S.C.- CSC_SER_I9500SERGNG3_2200416_REV00_user_low_ship.tar.md5

BE CAREFUL - CHECK SEVERAL TIMES!!!

Step 6:Now you need to connect your phone to your computer. BUT if you have KIES installed, then you need to close it and “kill” all processes in the task manager with a name that contains the word KIES. This is a must do. Now connect the device. If the com port is detected, press the START button in Odin.

Step 7:The process of copying firmware files has started.

Step 8:Wait until the phone reboots.

Step 9:Everything Samsung Galaxy S4 GT-I9500 is flashed. You can use it.

Root rights in 3 minutes

Let's now show you how you can get superuser rights or root access. BUT THERE IS ONE MINUS - YOU AUTOMATICALLY LOSE THE OFFICIAL WARRANTY FOR YOUR SMARTPHONE. AND THAT'S WHY I DO NOT RECOMMEND YOU TO DO THIS.

Step 1:We enter the device into download mode. I showed how to do this above. Let's launch ODIN.

Step 2:Press the PDA button and select the file CF-Auto-Root-ja3g-ja3gxx-gti9500. We connect the device to the computer. We wait for it to be determined and press the Start button.

Step 3:The files will download quickly. The phone will reboot and the message PASS will appear! - root received.

Step 4:Go to the main menu of your phone and the SuperSU application icon should appear there.

Step 5:I WILL REPEAT AGAIN. After rooting, go to Downloading mode and you will see that the custom firmware counter has triggered. This means that if you contact the ASC under the manufacturer’s warranty with some kind of malfunction, you will carry out repairs at your own expense. Since you blew the guarantee in 3 minutes. This is spelled out in the gar. coupon. Reset this counter more or less in a simple way We haven’t learned yet.

ClockWorkMod recovery (CWM)

CWM is a custom recovery that has much greater functionality compared to the standard one. Installation of recovery will be shown here philz touch for our smartphone. When you install this recovery, you also lose the WARRANTY.

Step 1:Boot your smartphone into download mode. Launch one. Select the file philz_touch_6.00.8-i9500 by pressing the PDA button, connect the body to the computer, after identifying the com port, press the Start button and wait for PASS!. CWM is installed.

Step 2:This is what CWM philz touch 6.00.8 looks like for SGS4.

Video: resetting the pattern key.

If you forgot the combination graphic key or just want to do a HARD RESET on your smartphone, watch this video. It shows everything in detail.

Samsung Galaxy S4 GT-I9500 “SECRETS” of development.

So YOU ​​learned how to flash Samsung Galaxy S4 GT-I9500.

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

If everything has been clear with the Galaxy S3 for a long time, it’s time to figure out a little about which firmware is best suited to the current one. Galaxy flagship S4. This year this smartphone will receive its last Android update and in this case, you need to decide on backup options, so to speak, with alternative solutions in terms of software. And this is what we advise you, Galaxy S4 owners.

The most popular and newest games for Android. Download for free.

Warning: before you throw yourself into the pool, check that you have selected the correct firmware for the desired version: GT-i9500 for the standard version of the smartphone, and GT-i9505 for the 4G model.

PAC-Man 4.4.2

PAC-Man is one of those firmware that is gaining more and more authority and popularity. This firmware combines many features of ParanoidAndroid, CyanogenMod and AOKP. Galaxy version S4 i9500 is built on Android based 4.4 KitKat and requires some rough edges to be eliminated for now, but latest version i9505 is considered more stable because it uses Android 4.3 as a base.

Lidroid V2.0

Anyone who is used to TouchWiz should turn their attention to Lidroid. This firmware is based on the official Android 4.4.2 and combines all the basic Samsung gadgets, such as a theme editor and an excellent file manager.

MIUI

You're probably wondering why we mentioned this already well-known firmware? Probably because samsung screen Galaxy S4 and MIUI color scheme go well together, as this firmware was specially created for smartphones. If you like large icon sizes, then MIUI will be right up your alley.

Prism Barebone

Prism Barebone is built on Android 4.3. The ROM is very stable in its operation and allows you to choose between TouchWiz and pure Android design. All pre-installed applications were removed, but Samsung widgets remained in its composition.

CyanogenMod 11

CyanogenMod has become the most popular and most traditional custom firmware. It is stable, reliable and, most importantly, updates appear regularly. If you don’t know where to go, then SM will be a win-win choice. There is both a version for the Galaxy S4 I9500 and for the S4 4G I9505. The most stable version is CyanogenMod 10.2, based on Android 4.3.

I am the owner of the once top-end Samsung Galaxy S2. Lately it has started to slow down and become glitchy, which is why the question arose about rebooting and reflashing it. After re-reading many instructions with old and out-of-date data, I decided to write a short manual for everyone and myself too, from which you will learn how to reflash a Samsung Galaxy of any brand quickly and safely.

This guide was tested on all Galaxy models, from the second generation to 5. I also had a chance to reflash a couple of Note 2 and 3 versions. But you can also apply these instructions to other Samsung phones.

How to reflash Samsung Galaxy

To reflash the phone we need:

1. Required firmware. Download anywhere specifically for your model. If you need the Russian language, then the word SER must be present in the firmware name.
2. Odin program _v3.09. Download.
3. USB Drivers Drivers for the computer to see your phone via USB. We also download.
4. Data cable.

Instructions for reflashing the phone:

Step 1. Download the firmware (single-file with the extension .md5) and unpack it to any location.

Step 2. Launch the Odin_v3.09 program, click on the AP button and select our firmware. The program will check it for several minutes, then write in the status window (small white window on the left) that the check was completed successfully (Checking MD5 finished Sucessfully).

Step 3. Preparing the phone for flashing. We enter ODIN MODE. To do this, turn off the phone and after turning it off completely, press the following buttons together: Volume (down, down) + center button + on/off button (Power). When you see a yellow triangle, press the button Volume (more, up).

Step 4. We connect the phone to the computer via a USB data cable. The Odin program will recognize your phone and write Added in the status window. After that, press the Start button and wait 10 minutes while the program uploads the firmware to your phone and installs it.

Step 5. Once everything is ready, the phone will reboot and Odin will tell you that everything is ready.

That's it, everything is so simple and easy. This is what the program window looks like, with what you need to work marked in red.

If you want to reset all parameters and format so to speak internal memory device to clean it of all garbage and other files, then that’s a different story. I’ll say right away that it was this cleaning that helped me get rid of the brakes and lags of the device.

How to format Samsung Galaxy

The procedure is as follows:

1. Turn off the phone.
2. Press the following buttons together: Volume (up, more) - central button - on/off button. We are waiting for the menu to appear.
3. We move through the menu using the volume button, and confirm our choice with the power off/on button. We need a line Wipe data/factory reset. We reach it and choose.
4. Next, select Yes — delete all user data.
5. We reboot your phone by selecting Reboot system now.