Home › Adviсe › Yandex.Tableau - instructions for creating. Setting up Yandex.Browser Why Yandex switches to scoreboards

Yandex.Tableau - instructions for creating. Setting up Yandex.Browser Why Yandex switches to scoreboards

Despite the efforts of the developers to create an intuitive Yandex Browser interface, it is often difficult to immediately guess where in the settings to enable or disable certain controls. This is the case with the missing “Scoreboard” element.

Tableau is a special area at the top of the browser where miniature images of websites or logos are located. Since the area occupies a decent amount of space, it was made so that it appears and disappears. The developers tried to predict the moment of appearance and disappearance based on user actions.

So, if a user wants to go to a site, he begins to write the URL in the address bar, at which point the program considers that it’s time to show the Tableau, because this site may already be presented on it.

If it's gone

As soon as the site starts loading, the scoreboard disappears. You can return it by starting a visit to a new resource. More about this below.

How to call it

The board appears only if the user expresses an intention to visit a portal. This intention involves performing one of two actions:

Opening a new tab;
Writing the resource address in the Yandex Browser line.

These actions are like commands that the program algorithm uses to open the “Scoreboard”.

Thus, there is no point in looking for it somewhere in the settings, start writing the address and it will appear.

Is it possible to stretch it

As far as I know, there is no way to enlarge the “Scoreboard”. The developers did not include this feature in the browser. It will not be possible to add more sites - their maximum number is limited to 18.

Controls

In order to configure the “Scoreboard” you need to go to editing mode. At the bottom of the window you can see the “settings” link; when you click it, the “Tableboard” switches to editing mode - graphic controls appear next to each thumbnail - pin/unpin icons (in the form of a stylized lock) and a delete icon (a cross). You can also rearrange widgets by dragging them.

Deny appearance

The official Yandex help section says:

If you are annoyed by the appearance of the “Scoreboard”, you can remove it. To do this, you need to go to the Yandex Browser settings and find the module responsible for the appearance. In it, disable the “Open Tableau” option.

No matter how hard I tried to find this option, I couldn’t find it. Most likely this feature has been removed in new versions of the browser.

It's gone somewhere

If “Scoreboard” does not open, it means you have disabled it in the settings. See the previous paragraph of the article and do the opposite - enable the “Open Tableau” option.

Change background

The scoreboard cannot be made transparent. This possibility is not provided (as far as I have information). Moreover, work with the background has also been stopped - I do not see buttons for editing the background in my browser, although they are described in the instructions in the Yandex help section. This means that this feature has already been lost in new versions.

Not saved to the cloud

“Scoreboard” synchronization does not occur for a very simple reason - Yandex developers chose to remove this feature based on their own considerations.

Both comments and trackbacks are currently closed.

Yandex, keeping up with Google, introduced its browser to users. It is quite convenient and easy to operate. If you have already installed this Internet application, then the next question that interests you is the Yandex browser settings. Naturally, for convenient work, each user makes them in accordance with his own preferences. Let's look at where exactly they are and what we need to do.

Default Settings

Before we talk about where the Yandex settings are in the browser, let's look at what the developers initially offer. After, here you can import settings from another browser, which was assigned as the default. So everything seems to be simple.

In addition, the developers have built the Yandex.Bar application into the browser. And you will learn how to install this useful application, for example, in Google Chrome. It is activated by pressing just one button. But as a result, you get access to a huge number of different services and social networks.

How to change settings

Given the minimalistic browser interface, it is very easy to find out where the Yandex browser settings are located. To do this, you just need to press the button and select Settings. To set the start page, click on the link Where to start. Here the user is given two options for what will be displayed upon startup. Firstly, these may be tabs that were opened in the last session before quitting the browser. Secondly, the most frequently visited sites can be displayed on the page.

We see that there is nothing complicated about how to find the Yandex browser settings . Therefore, we move on to the next stage - saving downloaded files. By default, they will be located in a special download folder. To change this, select Settings and follow the Show advanced settings link. Here we click on the Download button and mark the desired path for the files.

Many users are interested in how to save Yandex browser settings. To do this, you will need additional software, which is not difficult to find on the Internet. The same applies to how to reset the Yandex browser settings. At the moment, the developers have not provided a special button for this. However, you can delete the profile in which they are mainly located. To do this, select Users in Settings and click the Delete profile button. By the way, the window that appears allows you to perform such an operation as importing settings into another browser, which is very convenient.

Let's look at other ways to change the Yandex browser settings. For example, JavaScript is supported by default in the Internet browser. If you accidentally changed this, then you can return everything to its place through the same button. Select the context menu item Show advanced settings. Next, follow the link Personal Data Protection, where we are interested in the Content Settings button. In them we set a highlight opposite the inscription allowing JavaScript support. By the way, you can.

Of course, the hidden settings of the Yandex browser also deserve attention. Do not forget that some extensions in the Internet browser are installed by default. If you do not need them, then it is better to remove them immediately, for which we click the corresponding button next to the name of the add-on. For example, an extension such as “Integration with MetaProducts...” is unlikely to be useful, so I recommend removing it immediately after installation.

Everyone sets all other settings according to their own preferences. If you transferred them from another browser, but they are not displayed correctly, you will have to configure everything manually. To do this, press the button and find the item we need.

Yandex.Browser is a fairly popular and popular search engine, ranking third in the second echelon among its peers. The new version is a convenient, multifunctional and bug-free version of the Internet browser, which also has the function of Turbo loading “heavy” web pages at maximum speed. The browser has many important and worthy characteristics, which will be discussed in more detail in today's review.

Browser advantages and characteristics

I would like to immediately introduce you to main advantages search engine for further informed choice:

Built-in blocker advertising.
Advanced functional an interface that, unfortunately, does not exist in Google Chrome.
Intuitively simple settings and options that even a beginner can easily understand.
Turbo technology significantly speeds up the process of working with http by compressing pages and allows you to freely visit blocked sites.
Convenient Yandex panel with bookmarks, in principle, like in any other browser.
"Smart" address bar, which very usefully gives hints when typing site names.
Powerful built-in antivirus protection from Kaspersky Lab.
Built-in translator in 9 common languages.
There is a version for the Mac OS operating system.
Mobile version for Android and iOS.
Versatility in installing all extensions from Chrome.

Where to download and how to install

You can and should download the free and updated version of the Yandex browser from the official website. On the website you need to select suitable version for its operating system, in principle, all existing versions are offered there.

The browser folder is set to system drive C. In any case, the browser shortcut will appear on the desktop. If desired, you can find it in the Start menu, Application Manager menu, or through search. In order to detect all browser folders, you can use search in drive C itself. This is done like this:

Installation is provided for user selection: standard or default. After all the checkboxes have been checked, the installation will take place in a couple of minutes, and we will go directly to the convenient settings “for yourself”.

How to set up Yandex Browser

After installation, you will be taken to the Yandex home page with several visual tabs in the middle of the screen. By the way, a very convenient thing for quick access to the most visited sites. In order to get to the settings menu, you need to click on the small three-line icon in the upper right corner and select the function that we need from the drop-down menu.

Please note that many functions can be configured through the drop-down menu, let's look at each one separately. Let's start with the very first setting.

Synchronization

A convenient feature that allows you to store and carry your favorite bookmarks, passwords, extensions and personal history to any synchronized devices.

Access to personal data on the server protected by an authorization system, so all synchronization processes will take place using your Yandex.Mail account. If you already have an account, just log in, if not yet, then you need to. The next step is to check the boxes for the types of data that need to be synchronized.

The user, at his own discretion, has the opportunity to disable this function or change the selected data at any time. To do this, open the “synchronization” section through the control panel.

Home page at startup

The user has the right to choose where to start work when opening the browser– from a clean slate or from saved tabs that were opened in a previous session. What do you want to see when you launch the browser – a scoreboard or recent tabs? Make your choice by ticking the appropriate boxes.

Search settings

In Yandex you can configure fast advanced search, and the additional display of visual site icons visible in the search results is a convenient plus. To do this, we will use the settings page. Customize a convenient and correct search for yourself.

Appearance Options

Initially, when installing a search engine, all items enabled by default. If you wish, you can change the browser interface to your taste.

Bookmarks bar

A little lower are the bookmarks bar options. Many active users choose the convenience of saving bookmarks in the panel, which is located under the address bar. There's another great opportunity visual icons, of which 20 can be saved on the screen.

Adding a site to your bookmarks is quite simple, just a few clicks. The easiest way is to use a special asterisk at the end of the address line. Click on the star– select a folder – click done! It's very simple!

Another convenient way is to add bookmarks whole groups.

Search engine of your choice

To suit your taste, install the search engine you are used to using.

Setting up notifications

The browser supports the option on and off notifications about new materials on the website.

By the way, on social media tabs, you can enable a convenient function - displaying notifications about new messages. To do this, there is an “Informer” option in the Tableau settings; activate it and be aware of the latest messages.

User profile

A user’s personal profile is a personal set of all the favorite settings and data of the Yandex search engine. Profile created automatically during installation and securely stores all your data.

If you are not the only user of the system, it is recommended to create a separate profile for each user so that your settings and preferences remain only in personal access. To do this, just go through the settings and add profile. In the same settings, you can delete or change the profile if you wish.

You can view all current browser profiles and log in and switch between them using the icon on the top panel.

Default browser

If you like the Yandex browser and would like all hyperlinks to open in it, enable this function.

There is also built-in ad blocker– set up exclusions for useful advertising of your choice.

Connect Turbo mode

Be sure to enable Turbo mode, in any case it won’t hurt, especially if you have a mobile connection, the mode will help save traffic. On the start page with the Tableau you need to click on the button “ additions"Next go to settings and turn it on.

The basic settings end here, but there are additional ones that also play an important role and have several useful parameters.

Downloaded files

By default in all browsers, downloaded files are placed to your downloads folder. You may find it convenient to set your own folder once to save all downloaded files. You can also use and install a function in which the system will ask each time where it is better to save the downloaded file.

– a relatively new option that allows you to quickly perform all sorts of actions using special gestures. Allows you to scroll through previous pages.

Passwords and forms

If you are single user Your computer has a convenient function for automatically filling out forms and saving passwords. This option allows you to save time when accessing accounts.

Context menu

Enabling this option allows you to quick search highlighted words in Yandex.

To work, you need to highlight a word or sentence and click on the one that appears. triangle button. The context menu will instantly display the result - a quick answer or translation.

Web Content

Poor eyesight? If you want to enlarge the font or change its type, no problem! You can even zoom in on an entire page.

Network, language and region

An excellent solution from an advanced search engine is the choice of a suitable network for work, a convenient language and the ability to change the country at any time.

System, power saving and hardware acceleration

When disconnected from the mains, your device will be able to significantly save battery power and extend operating time.

The system has a productive option called “ hardware acceleration", which allows you to use the graphics accelerator; in addition, you can optimize images to reduce RAM consumption.

Reset settings

The reset button allows you to reset Almost all settings are back to factory default.

Tableau setup

Each new empty Yandex tab is a special, spectacular Tableau. Tableau is a quick launch panel for pages on which visual bookmarks of the most visited websites are located in convenient tiles. Also posted here buttons for quick access to your browsing history, catalog of downloaded files, installed add-ons, etc.

Adding visual bookmarks to the Tableau is very simple; to do this, copy the site address and the panel for adding will immediately automatically appear, then click done and the site will already appear as an icon on the Tableau.

If you need to remove or edit any icon, you need to hover the cursor over the right corner of the visual tab and click on the appropriate element.

Important! If you have a new version of the Yandex browser installed, but the display is not displayed, it’s time to check your device for viruses. Very often, such trouble occurs as a result of malware.

It is most likely possible to disable the Tableau. At least on the official website it is written that in the browser settings there is an option “open scoreboard”, which should be turned off. But we could not find such an item. Apparently this feature has been removed in new versions.

Setting up a theme

In Yandex.Browser, you can choose any theme for the start page from those installed in the program - regular or animated images. You can also additionally download from the Internet. On the start page, under the visual icons, there is the inscription “ background gallery"or the "customize screen" button.

Click on the button and select from the available ones, then click on the “ ready" Everything is easy and simple.

Setting up add-ons in Yandex

The Yandex search engine already has several useful programs and extensions built in that improve the functionality of the browser and make it more versatile. Using the drop-down Menu we get to the add-ons.

Here you can connect various add-ons and special modules, also created by third-party developers. By clicking on the button " additions» we find ourselves in the plugin manager. This page displays list of all add-ons, both preinstalled and those that the user will connect himself in the future.

Using the On/Off buttons you can easily control all add-ons. What really has no boundaries is the huge selection of all kinds of extensions from the catalog for Yandex (more than 150). Scroll down the page and click on " extension directory».

Important information! You can install a large number of different extensions, but remember - the more extensions you install, the slower the browser will work.

Disable plugins and remove toolbars

Very often, when installing third-party programs, various toolbars or toolbars appear on your computer. For their high-quality automatic removal, you can use universal special utilities, for example Toolbar Cleaner. But, there is another way to always be aware of events and manually check which programs and plugins are installed.

To do this, paste in the address bar of your browser browser://plugins and press enter, a page with all current plugins will immediately open. This is what she looks like:

Here you can manage all extensions and necessary plugins for work. If you want to find out more about any particular program, click “more details” in the upper right corner.

Deleting browsing data

In order to clear your browser cache and cookies, you need to go to the browsing history page. You should go to the menu, select the line “ additionally", in the pop-up window click " clear history»

In the background window that opens, set for what period of time the history should be cleared, and what exactly needs to be deleted. You can bring up a window on the screen using the hotkey combination “ Ctrl+ Shift+ Del" It looks like this:

Optimizing for maximum performance

To optimize, you need to go to the browser's hidden features page. We will change all the fine settings of our search engine. In the search address bar, enter browser://flags/, you can use the hotkey combination: Ctrl+F.

Increase maximum available RAM

On the page you need to find the name of the function “ Maximum number of images" In the menu, set the value to 512, this will significantly increase the speed of the search engine, without increasing RAM consumption.

Increase image loading speed

To quickly process images, we use as many threads as possible. Find the line " Number of bitmap threads" and change the default values to number 4.

Faster closing of tabs

Enabling this option will help save both time and nerves, especially when the Internet connection speed is low, when open tabs tend to freeze. Find the item " Allow quick closing of tabs/windows" and activate the option.

Hardware acceleration

After activating this option, the browser will use all the resources of the built-in video card, even if the card is outdated and weak. Find the name in the search " Overriding the software rendering list" Activate.

Don’t forget to periodically clear your browsing history, cookies and search engine cache, which in turn maintains the maximum performance of any Internet search engine at a high level.

Pin the Yandex button to the taskbar

For faster access to the search engine, you should pin it to the taskbar. How to do this? After installation is complete, almost all programs offer the option to “Create a shortcut on the desktop,” “Create a shortcut in the Start menu,” or “Create a shortcut on the Quick Access Toolbar.” The taskbar is our “Quick Access Toolbar”.

But, perhaps you forgot to check the box during installation or decided much later to add the search engine to the taskbar. To do this you need:

Hi all! Today I plan to talk in detail about Yandex.Tablo, another creation of Yandex which, so far, does not represent anything useful for self-promotion of sites, but is used to visually display your site’s widget on the quick access panel in Yandex.Browser. I started using the browser itself relatively recently, and I really liked the display of bookmarks in it in the style of Windows 8 tiles, and especially the ability to customize these tiles. Site widgets are included in the panel itself based on the frequency of traffic or simply added there manually.
Without hesitation, I sat down and made Yandex.Scoreboard for my . During the creation process, some problems arose, the origin of which I cannot explain, but using the “Scientific Poking” method, they were overcome. This is exactly what will be discussed further.
Despite the fact that the Yandex browser is very young, it has already gained popularity among Russian-speaking users. Based on this, it becomes obvious that it’s time for SEO optimizers and website creators to pay attention to it and use built-in “chips”, such as Yandex.Tablo, for example.

Advantages of Yandex.Tablo

As I said above, it doesn’t have any special useful properties applicable for website promotion, but for show, every webmaster or SEO optimizer who respects the seed should have this. Key points for changing the widget in Yandex.Tablo:

Changes to the background of your widget.
Adding a logo to the website widget.
Adding notifications about any events.

Step-by-step instructions for creating Yandex.Tableau

All basic settings are written in a file with the .json extension. In Yandex they recommend calling it manifest.json, but for me it did not pass validation, for what reasons I don’t know. I called him yandex-tableau-widget.json.

Contents of the .json file

( "version": "1", "api_version": 1, "layout": ( "logo": "/yandex-tablo-logo.png", "color": "#f7f0e6", "show_title": false ) - optional field)

1. At the very beginning of this file you need to write the following lines:

Json file - start

"version": "1",
"api_version": 1,

And just like that (Yandex recommended installing version 1.0 or 0.1, in short it doesn’t matter), at least, I just missed validation.
2. The background color is set as HTML, in my case - "color": "#f7f0e6", as a background on the site.
3. The logo is created using Photoshop, size 150px by 60px, I did it on a transparent background and save it in .png format, I have yandex-tablo-logo.png
4. Write the path to the logo - “logo”: “/yandex-tablo-logo.png” all in the same file with the extension .json

After these simple steps, put these two files, yandex-tablo-logo.png And yandex-tableau-widget.json to the root of the site. In head we write the following line:

String in Head

You can check what your website widget will look like in Yandex.Tablo in the following way:
In Yandex.Browser, enter the magic phrase chrome://tableau-widget, in the window that opens, enter the full path to your .json file (in my case https://site/yandex-tableau-widget.json) and click “Check”, if everything is fine, then you will be able to see the widget of your site:

Then you can safely add it to your bookmarks and boast to your friends about your unique widget in Yandex.Tablo

In addition to this, there are several more functions that I did not add, because... I don’t see much sense in them yet, but I’ll briefly describe them:

Possibility of adding notifications, the number is not limited, but no more than 3 pieces are displayed. The feed field is responsible for them. They look like 14x14px icons that can notify users about something. They change with every Yandex.Tableau update.
The logo and color of the widget can have both static values and those depending on the browser interface language.

Small addition from December 25, 2013 - Downloaded and installed today FireFox and was very pleasantly surprised, it already has a built-in scoreboard and picks up all widgets.

Thank you for your attention. I hope this information will help you in creating Yandex.Tableau.

When you open a new tab or click on Smart Row, the Tableau opens - a panel with widgets for the sites you visit most often. By default, widgets for some Yandex services are installed on Tableau.

To go to the desired site, click on its widget (it displays the logo and, if the widget does not open the main page of the site, the name of the page).

Advice. To quickly open the desired widget on the Tableau, use the keys:

on Windows: press Ctrl + T and then Alt + 1, 2... .

on macOS: press ⌘ + T and then Ctrl + 1, 2... .

where 1, 2... are the numbers of widgets on the Tableau (from left to right and top to bottom).

The set and sequence of widgets on the Tableau can be configured manually.

Note. To resize the Tableau, right-click on any widget and select the command Tableau Size → Normal or Tableau Size → Enlarged. If you select the command Tableau size → Fit to browser window, then when the browser window is reduced, the size of the widgets will also change.

Automatic selection of sites for Tableau

During the installation process, the browser selects sites for the Tableau based on the history imported from other browsers - the sites that you opened most often appear on the Tableau. If you did not import history during installation, the Tableau displays a default set of sites.

Yandex.Browser periodically updates widgets on Tableau that you have not pinned. Sites are added that you search for more often than others through the Smart Line or open through the Tableau.

Sites manually removed from the Tableau will no longer be automatically added to it. To return such a site to Tableau, add it yourself.

Adding widgets to Tableau

Open Tableau.

Under Tableau, click Add → Site.

Specify the site you want to add to the Tableau widget. You can select a site from the Popular or Recently visited, and also enter its address manually.

Limitation. You can place up to 20 widgets on the Tableau.

Editing widgets

To manage the Tableau content, go to editing mode:

In edit mode you can:

","hasTopCallout":true,"hasBottomCallout":true,"areas":[("shape":"circle","direction":["top","left"],"alt":"Delete widget" ,"coords":,"isNumeric":false,"hasTopCallout":true,"hasBottomCallout":false),("shape":"circle","direction":["bottom","left"],"alt ":"Pin widget","coords":,"isNumeric":false,"hasTopCallout":false,"hasBottomCallout":true),("shape":"circle","direction":["bottom"," right"],"alt":"Unpin widget","coords":,"isNumeric":false,"hasTopCallout":false,"hasBottomCallout":true),("shape":"circle","direction": ["top","right"],"alt":"Edit widget","coords":,"isNumeric":false,"hasTopCallout":true,"hasBottomCallout":false)]))\">



	Add a signature and enter the site name.

Additional editing options
Change the site the widget links to	Click the icon and enter the site address in the line under the Tableau.
Add site name to widget	Click the icon, then in the line under the Tableau, click the button Add a signature and enter the site name.
Adjust the site name on the widget	Click the icon, then correct the site name in the line under the Tableau.

Folders with widgets on Tableau

You can group widgets into folders. For example, by default, widgets with links to Yandex services are grouped into one folder.

Create a folder with widgets Delete a folder with widgets

Scoreboard Synchronization

You may have different favorite sites on different devices, so the Tableau on devices is generated independently of each other.

To find out which widgets are pinned to Tableau on any of your synchronized devices:

Select the folder with the device name. Sites pinned to the Tableau are located at the top of the list that opens.

Disable Tableau synchronization

After that, on the tab Other devices sites pinned to the Tableau will not be displayed.

Scoreboard after OS reinstallation

If the operating system and then the browser were reinstalled on the computer, the Tableau will be updated - default widgets will appear on it. But you can view the list of sites attached to Tableau before reinstallation using synchronization (it is tied to the device name).

In the list of devices, click the folder with the computer name before reinstalling the OS. A list of sites pinned to Tableau before reinstallation will open.

If there is no such folder, then the computer name most likely did not change after reinstallation. In this case, the browser does not consider the computer a new device and does not show the data folder until reinstallation. Rename your computer ( Control Panel → System and security→ System → Advanced System Settings→ Computer name) and wait a bit for the data to synchronize with the server. Then open the tab Other devices and open the folder with the old computer name.