Wooden letter box. How to make a mailbox with your own hands. For construction you will need

A mailbox is an integral part of any home. How to make it yourself Mailbox, unique in design and having the function of notifying about the arrival of mail, is described in this article.

If you have a house, then you have your own address to which they send you postal items- press, letters and other notices. To receive correspondence, you can buy a mailbox at any appropriate store and hang it on the front door. This solution, in addition to being expensive (high-quality mailboxes are quite expensive), is also bad because the ready-made options are faceless and, accordingly, are not able to decorate your home. We will tell you how you can make a unique mailbox with your own hands, which has two undeniable advantages over purchased ones:

• located on the inside of the fence, that is, located on the territory of the personal plot, and having a decorative appearance, it will serve as a decoration for the garden;
• the box is equipped with an autonomous mechanical mail arrival alarm, that is, the box will have a simple, reliable and fail-safe mechanism that is triggered when mail arrives, thereby informing the owner that the mail has arrived.

In the end, such a mailbox will cost you less than a purchased one, and you can make it yourself in one day.

So let's get started.

Tools and materials

To make a mailbox house we will need:

1. Circular saw or hand saw.
2. Drill or screwdriver.
3. Tin sheet or any other sheet material. A cut tin can will do just fine.
4. Lumber trims.
5. Wooden skewers. We will use them as dowels.

Manufacturing instructions

1. We start by making the base platform. To do this, we use a rectangular piece of plywood 20 mm thick. We cut out a rectangle according to the dimensions indicated in the photo, sand it with sandpaper and cover it with primer.

2. We cover the edges with decorative coverings.

4. After painting the platform to the bottom using self-tapping screws, we fix the stand and the slope, which are made of a profile pipe.

5. We fix the platform at the place where the mailbox is installed.

6. We make a damper on the outside of the fence. We cut a vertical hole in the corrugated sheet of the fence. From a metal plate 1.5 mm thick we make coverings for the gap and the damper itself. We fix the damper using a self-tapping screw in its upper part to the coverings on the crack. The flap moves to the left or right, thereby opening the entrance to the slot through which mail enters.

7. Let's start manufacturing the mailbox parts.

8. Assembling the frame. We additionally secure the parts at the gluing points with wooden dowels.

9. We fix the left side wall to the frame and begin to make the signaling device. It consists of two metal plates connected to each other by a metal axis and located in relation to each other in perpendicular planes. We fix the plates to the axle using metal rivets. On the plate that will be located outside the mailbox, we apply a thematic design (postman), use metal scissors to cut along the contour of the design and paint with acrylic paints. The second plate should cover the entrance hole from the inside of the box. Thus, the empty box is made ready by lifting the right plate. When placing mail in the box, the plate falls, raising the left plate with the postman drawn on it. It is its appearance that signals the presence of mail.

10. The signaling device axis is fixed using corner metal hinges to the platform with self-tapping screws.

11. Fix the front wall and insert a thematic drawing into the opening of the future window.

12. We make parts of the window frame. Before installing the frame, we insert glass into the opening.

13. Glue the right side wall. In the center of the wall we make an imitation of a door and decorative cashing from fiberboard. We also make a back wall from fiberboard with a vertical slot into which mail will flow into the mailbox.

14. We decorate the outer corners of the house and the lower part with wooden corners.

15. Let's start making the roof. Glue the roof base frame together.

16. Glue a piece of fiberboard to the bottom part. Next, we glue two pairs of rafters onto the frame. All connections must be additionally secured with dowels.

17. We attach the roof frame to the house using small hinges, since the roof will serve as a mailbox lid.

18. We make the roof gables from fiberboard and glue the ebb on the front side.

19. We attach a rough roof from scraps of boards or clapboard to the rafters.

20. Using small nails, we fix tiles cut from tin onto the rough roof.

21. After fixing the tiles, we make the ridge and wind strips.

22. Making a porch.

23. We install the structure in place. Your unique mailbox is ready.

Evgeny Dubinin, rmnt.ru (based on materials from user Valley)

Often boxes for receiving letters and newspapers are not particularly original. Standard-sized metal boxes painted in any color can satisfy the unpretentious tastes of the owners, but creative people will definitely consider such a box as the basis for an original exterior item.

Ideas on how to make a mailbox with your own hands can be adopted from neighbors whose fences were decorated with original and functionally convenient correspondence receivers, or you can take into account the options proposed in this article.

Types of mailboxes

Classical Mailbox - a small rectangular box with a slot for receiving correspondence. It is made mainly of metal or wood. Such boxes are most often found on the streets of post-Soviet cities. The main advantage of a standard mailbox is its ease of manufacture and use.

English mailbox - a metal box built into the wall of a building, or made in the form of a table or cabinet.

American mailbox- installed on a separate support (rod made of metal or wood). The box itself often has a special flag that must be raised to signal the postman that there are letters to be sent.

No matter what style your mailbox is designed in, it must meet the following standards:

• Be durable.
• Convenient to use.
• Protected from moisture.

Making a standard wooden mailbox with your own hands

You will need:

• a piece of plywood at least 5 mm thick;
• wooden bars 15*15 mm;
• furniture hinges;
• small tin plate;
• jigsaw or file;
• a set of nails and self-tapping screws.

Let's start work

1. From a sheet of plywood, cut out 2 blanks 350*350 mm and 350*370 mm. These are the future walls of our box and sides. For the bottom you need to cut a blank 250*70 mm. From this moment we began to create a mailbox. Anyone can make it with their own hands.
2. In the upper part you need a gap at least 20 mm wide so that letters and other correspondence can fit freely there. In view of this need, we make the blank 250*50 mm, and place the opening for letters near the edge of the upper part. We make the bottom bar with dimensions of 250*70 mm.
3. We cut 4 bars 350 and 220 mm in length. They will be located in the corners of the box to provide rigidity to the structure.
4. For greater durability, before assembling the box, we treat the parts with solutions against insects, fungus and rot.

Collecting the mailbox

We remove burrs and small irregularities on all parts using sandpaper. We assemble the bars in the shape of a rectangle, and lay the front wall on top of them. The sides of the bars must be aligned with the ends of the plywood blank, then we fix everything with nails or self-tapping screws. To make the joints more durable, you can first glue them together, and then knock them down with nails.

We also connect the back wall with the bars. Important! Do not forget about mounting the box to the wall of the building or to the fence. For this purpose, screw 2 lugs to the upper part of the back wall.

Place the front and back walls on their ends and fasten them together with the side planks (350*70). We attach the upper part of the box, consisting of 2 parts (250*25), first with glue and then with nails, but be sure to leave a gap of at least 20 mm.

We make the bottom of the box open so that you can get incoming mail. For these purposes, we screw 2 furniture hinges to the long edge of the plank, and install a small corner hinge for the lock on the reverse side. Afterwards, we attach the furniture hinges to the back wall, close the bottom and, at the level of the first lock bracket, install the second one to the front side.

To avoid moisture getting into the mailbox, we cut it out of tin and then mount a protective canopy to the mailbox. Its edges need to be rounded.

After assembly, sand again and paint.

There are many options for making a box from scrap materials. They differ in shape and design, as well as in the material used to build them, and in price. Many models can be easily created with my own hands, using fairly cheap materials. Some are made using specific skills that require enormous effort and considerable expense.

What types are there?

When choosing a design, first of all you should pay special attention to the general style of the house, the expected capacity, as well as the location of the drawer. It is very important that the owners initially decide whether it will be used only for its intended purpose or whether it will perform additional decorative functions.

The style of execution of the product can be very diverse. The most commonly observed types are:

• standard or traditional;
• English;
• American;
• original.

Traditional mailboxes with a special slot for placing letters, newspapers and other correspondence are the most common in post-Soviet countries and can be made from any material.

Today, traditional structures are increasingly being decorated, thereby giving them a more unique and interesting look. Standard boxes are most often installed on gates or fences. They are very easy to make and use in the future.

For example, an American mailbox: they are all similar in structure, but when it comes to decor, each of them has no equal in this regard.

Each type has a special flag that, when raised, indicates that it contains a letter that needs to be sent as soon as possible. Postmen in America take out such letters and mail them themselves. In post-Soviet countries, you can also work according to this scheme, but for this you need to agree on this service in advance with the postman.

Such structures are mainly installed on some kind of separate support made of any material: wood, metal or others.

Traditional versions of boxes are more spacious, unlike American ones. Based on this, before you decide to make an American-type box, you need to know exactly the amount of correspondence you receive.

As for English mailboxes, they are presented in the form of a kind of column-shaped cabinet made of brick or any other durable material. It is customary to install them on the ground just a few meters from the threshold of the house or the entrance to the territory of your site. Outwardly, they resemble a small house, are very roomy, and their strength cannot but surprise.

If we talk about original types, then these include all models that have a very interesting and attractive design solution. Even various household items can be used in such a way that it will be impossible to take your eyes off.

To make a box of any type and type, you can use brick, plastic, wood, metal. If you make it yourself, it is best to give preference to a wooden or plastic variation, the construction of which will not take much time. If you decide to make a box from metal, then you need to resort to using additional tools and have welding skills.

The most durable and very reliable boxes are considered to be those made on the basis of brick or metal, in other words - for the press, English style.

A beautiful mailbox, reliable and very durable, you can make it yourself. There are several basic recommendations that are responsible for the quality of the product:

1. If the product is made of wood, then it is best to fasten each element of the future structure with special corners, which will give the mailbox additional strength and, in case of urgent need, will facilitate repair work.
2. If the slot intended for receiving correspondence is located at the top, a special protective canopy should be made that will prevent precipitation from getting inside the box.
3. In order to remove letters, it is best to make the door at the bottom. It would be nice if the entire lower part of the structure folded back.
4. If the door for removing mail is located on the front panel of the structure, you should accurately calculate all the necessary dimensions, as well as adjust the main parts to prevent the formation of gaps.
5. To ensure that no one except you can retrieve your correspondence, especially during absence, you need to install a lock.
6. To prevent all kinds of advertising leaflets and flyers from being thrown into your mailbox, install a separate wooden cabinet next to it designed for this information.

Instructions for making a wooden or plywood box

In order to make a box out of wood, you will need to stock up on the following materials:

• wooden sheet (veneer or plywood) - 65*65 cm;
• plywood 0.9 cm thick - 65 * 43.5 cm;
• special pine beam - 100*0.75*0.5 cm;
• specially prepared piano loop - 13 cm;
• sandpaper to smooth out unevenness;
• mortise lock;
• screws;
• glue for woodworking;
• colloidal silica;
• epoxy adhesive consisting of 2 components.

First of all, the existing pine beam will need to be cut into 3 equal pieces - 33 cm. On one of the beams you will need to draw 1 main and 2 transverse lines, with a distance of 30 cm. Using a pattern, draw a smooth curved line. Using a hacksaw, the required bend is cut out, and the edge is thoroughly cleaned. The 2 remaining bars should be processed in this way.

Then they need to be properly glued together. Plywood measuring 0.9 cm will need to be cut into pieces.

Wooden mailbox option

8 sheets measuring 32*16 cm are cut out of thin plywood or veneer. After this, all the pieces are carefully glued together. It is important that no gaps are formed during gluing.

As soon as the glue dries, the finished lid will need to be properly sanded and adjusted to the required dimensions.

In order for correspondence to be placed in the mailbox, a special opening will need to be cut on the front wall using a hacksaw. It will be necessary to make the opening necessary for the door.

After this, a piano hinge is cut out across the entire width of the existing door, after which it is attached to the base using screws.

In the same door, you need to decide on a place to embed the lock, then cut out the keyhole and install it.

After this, the lid is attached to the top. Then the door is installed and the finished box is sanded using sandpaper.

If desired, the structure can be decorated with all sorts of colors or simply varnished.

A wooden mailbox is very easy to make. The main thing is desire and compliance with all the rules during the manufacturing process.

Instructions for creating an original mailbox

Mailboxes that have been approached with an individual design approach will look very interesting and very unusual on your site. A mailbox can be easily made from household items that are unnecessary and available funds at hand.

So, a mailbox made from a plastic bottle is perfect for those who receive a small amount of press. A huge plus is that its creation and installation will not take much time, money or special effort.

An antique cuckoo clock can make a wonderful mailbox. To do this, you will only need to disassemble this watch and attach the front side to an ordinary wooden box. The place where the cuckoo once jumped out will be used by postmen to place the press.

If you have an old unnecessary computer system unit, then make a mailbox out of it. To do this, you just need to gut all the insides of the system unit and place it on some kind of wooden or other sufficiently strong support.

The postal version can also be safely built from cardboard, the main thing is that the material is durable. When creating such a structure, it is necessary to take into account its location.

Installation methods

People are most interested in installing traditional mailboxes. The most common installation methods are:

1. Installation on the fence. For this type of installation, you must first make 2 cuts on the back of the box, through which the metal clamps necessary for fastening will be threaded. You need to level it by tightening the clamps.
2. Installation on any hard surface. Very often you can see that mailboxes are installed on metal or wooden gates. In order to carry out such an installation, it is necessary to prepare in advance a certain number of holes not only on the back panel of the box itself, but also on the gate. The finished product should be secured with nuts and bolts.
3. Wall mounting. In order to produce it, you should make 2 holes, both on the product itself and on the wall. The structure should be secured with dowels.

Having a great desire and a certain amount of free time, every owner can easily make a mailbox with his own hands, without the help of professionals.

In recent years, we have been receiving more and more letters from e-mail: it's fast, convenient, reliable. But despite all the advantages of electronic mail, printed publications, advertising booklets, leaflets and, of course, paper letters and greeting cards are in considerable demand. Well, to receive correspondence, of course, you need a mailbox. This is exactly what we will talk about today in our article. Let's look at what they are, and also learn how to make a mailbox with your own hands.

Mailboxes

Such boxes are not particularly diverse; consumers purchase the same type of wooden or metal models at a retail outlet. But in vain. After all, those made according to individual sketches attract attention no less than a work of art. It’s very good when, with an unusual design, they also fit into overall design exterior.

American

American mailboxes in most cases resemble a travel bag.

A metal box with a flat bottom and a hemispherical top, mounted on a low pole near the house. And their decoration can be very diverse, and most often it is the support that acts as a decorative element. These can be figures of animals, people, fancy, ornate columns. Although the letter receivers themselves are quite original.

English

English mailbox

English ones are made in the form of a free-standing cabinet made of brick or metal. Most often they have a round cross-section in cross-section, but there are also rectangular or faceted models, crowned with various finials. By the way, they are impressive in size compared to our boxes and reach a height of more than a meter, and for some reason they are almost always painted red.

For the eyes of residents of the post-Soviet space, flat rectangular boxes made of wood or metal are most familiar. In addition, they practically do not differ in size and are made to conveniently accommodate publications in A-4 format. And the more attention is attracted by original mailboxes in the form of houses, metal chests or briefcases with forged elements, painted in the Khokhloma style, with Zhostovo or Gorodets motifs or decorated using the decoupage technique. There is no limit to variations, everything is limited only by flights of fancy.

Requirements for boxes

Homemade mailboxes

Of course, the first thing that mailboxes must ensure is the safety of correspondence, and not only from those who like to read other people's press, but also from precipitation. Therefore, it is advisable to provide each design with a small lock that will securely lock the door. In addition, it is necessary to ensure tightness, because falling raindrops quickly spoil paper publications. This is especially true when the slot for loading mail is located in the upper horizontal edge of the box. In this case, it would be a good idea to place a protective visor over it.

The size of the mailbox plays an important role, especially if you receive thick, glossy magazines or catalogs by mail. They should be placed freely inside without being deformed externally; nevertheless, picking up a crumpled magazine is not very pleasant.

It is very good when in order to remove the newspaper you do not need to perform unnecessary movements. Think in advance about how the excavation will be carried out. When placing the door at the bottom, keep in mind: neither newspapers nor keys should fall to the ground when opening the door if you decide to install a super complex locking mechanism. A vertical door is much more convenient in this regard. Inspection slots or holes are also very necessary elements; thanks to them, you won’t have to open and close the structure again, everything will be visible in advance.

Note. Don't forget about convenience for the postman: it's not good if he has to load your press for too long, especially in the rain or snow. It is advisable to make the slot large enough for the normal passage of magazines and newspapers, and its edges should be smooth and even so that the paper does not tear on them.

Boy throwing a letter into the mailbox

The aesthetic side is exactly what pleases the eye and brings satisfaction to the owner of the box. Think about the design, a harmonious combination is never superfluous. On forged or cast iron fences, beautiful iron mailboxes with similar forging elements will look much more appropriate than wooden carved houses. It is better to place them on fences made in a rustic style. This could be, for example, a small copy of a house, decorated in decoupage style and located on a free-standing cabinet.

Boxes for a private home are attached not only from the street side; it is quite possible to place them in the yard. Then the slot for letters is located in the fence or gate, and the box itself is installed with reverse side. With such a device, there is no need to install a lock at all; a small hook will be enough to prevent the door from opening spontaneously. And the vertical facade wall can be made not only of wood, but also of glass, through which the contents of the box will always be visible. Moreover, the door can also be glass; you just need to make a frame and enclose the glass in it.

Installation

There shouldn’t be any particular difficulties with installation; this is probably one of the easiest things to do when creating a mailbox. However, despite the simplicity, we will still consider some methods of fastening.

Through - holes are drilled in advance in the back wall of the box and in the fence and tightened with bolts.

Sometimes it is much more convenient to attach hinges to the finished structure and screw a self-tapping screw with a washer directly into them. You don’t have to buy such fastenings; you can easily make them yourself from metal, thereby somewhat reducing the total cost of the box.

It is not necessary to attach the box to a fence or wall of the house; you can assemble a free-standing structure for it. This could be a wooden shield under the canopy, on which, in addition to the box, you can place additional decorative items, flowers, or decorate it using the same decoupage technique.

Metal mailbox

Assembly

Making a wooden mailbox.

Having familiarized yourself with the basic recommendations for creating a mailbox, you can begin assembling it. Let's figure out how to make a mailbox, stylized as a country house, with which you can decorate your site. For the frame we will use an OSB board and a wooden beam with a cross-section of 20*20, which we will subsequently cover with aged pine boards.

1. First of all, you need to draw a sketch with all dimensions. The volume and dimensions can be chosen according to individual wishes, or can be made according to standard dimensions of 300 * 300 mm, and a ridge height of 400 mm.
2. Cut 2 rectangles 400*300 mm, these will be the back and front walls.
3. Connect temporarily with clamps or self-tapping screws. Cut 2 triangles at the top to form the roof gable.
4. Cut out the sides from the OSB board, the width of which is 300 mm, and the height is the same as that obtained on the facade blanks after the formation of the pediment.

Wooden mailbox

1. Strengthen the timber along the vertical ribs on the front and rear walls. To do this, first glue it with wood glue, and then additionally secure it with staples. Trim the excess timber flush.
2. Assemble a box of 4 parts, connecting the parts in the same way, using glue and staples.
3. Mount a frame from the same timber along the perimeter of the lower part from the inside.
4. Cut the bottom 300*300 and attach it to the frame.
5. Mount the timber frame in the upper part from the inside along the roof gable.
6. Install the slopes, creating overhangs on all sides.
7. Secure all connections with self-tapping screws.

Note. Of course, you can assemble the frame only from bars, connecting them together with a tongue-and-groove connection, or metal corners, and then cover them with plywood.

Post box in England

1. Cover the top with thin pine slats, which are first artificially aged with a grinding machine, installing abrasive brushes on it.
2. Cut a slot through which correspondence will be loaded.
3. Cut the door and install it on the hinges.
4. Embed the lock.
5. Cover the roof slopes with soft roofing material and install a decorative wind board.
6. Cover the house with stain.

You can decorate with any material: PVC plates, plastic lining. Or you can cover it with plywood and decorate it in decoupage style, choosing any design you like. In this case, a final varnish coating is necessary, which will protect the structure from the aggressive effects of the environment.

Making an American box

Despite the seemingly difficult shape to manufacture, an American box can be easily made from an old car muffler. You just need to cut it into two parts, one of them will become the roof.

The remaining parts for the rectangular box can be cut from metal sheets.

An American box can be easily made from an old car muffler

Don’t despair if your household doesn’t have a welding machine; a rivet gun will do. You will need to pre-drill holes for the rivets with a metal drill.

Carefully seal the seams with silicone.

The door will need hinges and a lock.

A can of spray paint in your hands - and in a few minutes the box will shine like a new car.

If desired, you can install a folding flag, although it is unlikely that you will be able to use it for its intended purpose.

Instead of a conclusion

Mailboxes are easy to assemble from available materials around the house. After all, they come from plastic bottles, canisters, cardboard and plywood boxes, and they can be decorated with napkins in the decoupage style. You just need to apply a little ingenuity and patience, and you will be able to not only save some money, but also create an individual decorative item

Usually the need for a mailbox is present not only in a country house, but even in a summer cottage. After all, just like a house, it has its own address. That is why any building with a postal address must be equipped with a mailbox.

There are many options for shape, color and material in the manufacture of a mailbox. It can be cardboard and wood, metal and plastic. All of them may differ from each other not only in material, but also in model, design and price. It’s not difficult to make a mailbox, if you have the desire.

Most of the mailbox models can be made independently. This applies more to simple mailbox options. As for more complex structures, for their manufacture you will need certain skills. In this case, it is better to buy a mailbox ready-made.

Types of mailboxes

As previously noted, all boxes are divided into several types. Which option should be preferred when making a mailbox, you will have to choose yourself. The main thing is that the production of the chosen option is feasible.

In addition, when giving preference to a certain type of structure, you should take into account the overall style of the house, the required capacity and the place for its installation. It is very important to consider the purpose of the mailbox. If it is planned to use it only for its intended purpose, to receive correspondence, then a variant of the form may be of a simpler form. But if the mailbox must also serve a decorative role, then its design must be original in accordance with the interior of the house.

Several styles can be used to construct a mailbox design. Today there are only three of them.

Mailbox styles

This could be the style:

• Standard design, traditional letterbox style;
• American performance style;
• English;
• Original style.

A traditional mailbox is a conventional, standard design of a mailbox with a slot for correspondence. This is the easiest way to make a mailbox, which can be made from any material.

American style They can be different in appearance and decorativeness. Such boxes are installed only in a horizontal position, which requires nested correspondence; postmen first have to roll it into a tube.

A distinctive feature of an American style mailbox is the specially placed flag. With its help, the postman can easily determine whether there is correspondence to send. Indeed, in this case, the sender attaches letters for sending and raises the flag accordingly.
Such a box is installed only on a separately installed support in the form of a pipe, or the support can be made in the form of some kind of figure.

English style The mailbox looks like a column cabinet. Typically this type is made using brick and durable metal. This design is installed near the entrance of the yard to the house. This type of design is more like a miniature house, made taking into account the structural features of the house, than a mailbox. The capacity of this type of mailbox is very large, which allows you to put received correspondence in the box without much difficulty.

But there is also an original look for mailboxes. This type includes boxes made in accordance with the interior, using design ideas in the form of fabulous transformations of various objects into a mailbox.

To make a mailbox in an original style, you can use wooden materials, brick and metals. But it should be taken into account that to produce metal, in addition to the material itself, you will need welder skills and a welding machine.

Whatever option and style of mailbox you choose, do not forget that the mailbox at home should not disturb the harmony and should fit perfectly into the overall interior.

Designing and making a box for newspapers and letters is as easy as shelling pears. It is possible to do this with your own hands. But before you get started, you should use some tips and tricks for making a high-quality mailbox design:

• When making a structure using wooden material, all its elements must be interlocked with the help of corners. Thus, the product will gain increased strength and will facilitate repair work in the future;
• If the intended slot for inserting newspapers and magazines is located in its upper part, then to prevent water from entering in rainy weather, a special canopy should be installed above the slot - protection. Thus, you will protect received letters and newspapers from the effects of rain and snow;
• The door for removing correspondence should be located at the bottom of the box. It is better if it is made in a folding version;
• When placing a newspaper removal door on the front of a mailbox, everything needs to be carefully designed to prevent gaps between the mailbox panel and the door.
• To protect your mail from unwanted readers, it is better to include a device in the mailbox design for locking it. This can be either a padlock or an internal one, which is installed on the inside of the door and drawer;

In addition, you can show originality. For example, you can install an alarm in your mailbox to provide a sound notification that mail has been received, which is very convenient, especially on days when the weather is bad. But this will require special skills and abilities.

How to make a mailbox on your own?

In order to design and make a box using wood material, for example, plywood, you should:
prepare the following materials:

• veneer sheet or plywood sheet (630*630 mm);
• plywood must be at least 10 millimeters thick;
• wooden beam within the size range of 1000*75*50 mm;
• loop made of brass or stainless steel (120 mm);
• sandpaper sheet;
• internal or padlock;
• screws and staples for a padlock;
• adhesive composition for gluing wooden surfaces;
• colloidal silica;
• two-component epoxy adhesive.

The entire process of making a box is carried out in several stages:

1. The prepared wooden beam must be divided into three equal-sized parts and sawn. Three lines are drawn on one sawn part of the timber. Among which, one is the central line. The remaining two are transverse lines, and the distance between them should not exceed 300 mm. After this, the main curve is drawn and the bend for the edge is cut out and cleaned using a hacksaw.
2. Similar work should be done with the remaining two pieces of beams, observing, at the same time, exactly in relation to the work done on the first piece of the beam.
3. The finished bars are glued together.
4. Plywood is cut into pieces according to size.
5. The cut sheets of plywood should be at least 8 pieces of 320*160 mm each. After this, all the workpieces must be laid on the concave section of the block and treated with epoxy glue. Next, you need to lay a paper sheet on the main block as the first layer, and then a plywood sheet. In order to avoid mistakes, before gluing it is necessary to first place the veneer sheets in accordance with the design. This way, you will check that all the details match, which in turn will show whether everything was done correctly and whether there are any gaps in the mailbox.
6. Once the glue has dried, the finished cover can be sanded and adjusted to fit the dimensions of the back and front of the mailbox.
7. On the front part it is necessary to cut a slot for placement postal correspondence and a special opening for removing mail from the box.
8. A piano hinge is cut along the width of the door and attached with screws.
9. A mortise lock is installed on the door.
10. A lid is attached to the box.
11. After installing the door, the product is sanded using sandpaper.
12. If desired, the finished mailbox can be opened with varnish or painted.

Making an American mailbox

In order to make the simplest model of such a box, you can use sheets of metal in its manufacture. It is from them that the blanks are cut in accordance with the dimensions and in accordance with the shape for the mailbox manufacturing project. Two main components in the shape of a rectangle with different sizes, and the third part should be a little larger in the form of a semicircle for the roof. The side sheets must be cut to the same size.

The structure is fastened using either welding or nuts and bolts. The door and handle for it are also attached.

If the American type of box is made of wood, then it can be made in the form of a small house with a door through which mail can be placed in the house.

Metal mailbox

This type of mailbox manufacturing is the most complex and time-consuming type of manufacturing among all types. First of all, you can’t do without special devices to make it. First of all, this is an angle grinder, a drill, and a welding machine. But nothing is impossible; if you have the desire, you can overcome any difficulties. But, if you consider that a metal mailbox is much stronger than all the others, then the game is worth the candle.

The process of making a metal box is almost the same as making a wooden box. The only difference between them is the material and method of fastening.

More details in the video:

The finished version of the product is treated with a primer and painted, and it can be painted in one color or painted with different designs, the main thing is that everything is done with taste.

Creating an English-style mailbox

In this case, there can be no limit to imagination; for a post office house you can use all available material that does not get wet and does not deteriorate under the hot rays of the sun. The main thing in this matter is originality. In general, plastic bottles and pipes can be used as containers for placing mail.

You can also construct a mailbox from an old wooden clock, a child's school bag, an old system unit, tape speakers, in general, from everything you want.

An original mailbox can be a piece of log. The core is taken out of it, a small door is screwed on and fastened in any direction, horizontally, vertically or even in an oblique direction, but most importantly - in such a way that the mail hole is not directly exposed to precipitation, and everything else is the result of your imagination.

Mailbox installation method

Mailbox can be installed different ways and in different positions. If we talk about the American type of mailboxes, then this type is installed on a special support, the English type of mailboxes is installed on a built-in monolithic structure.

Today, simpler and more standard methods of installing mailboxes are used.

Here are examples:

• A mailbox is installed on the fence. This can be done using special fasteners or by screwing the box to the fence using bolts and nuts.
• Mailboxes are attached to gates, which can be made of wood or metal. Depending on what the gate is made of, the type of fastening used is either clamps for fastening or nuts and bolts.
• A very common way to mount a mailbox is to mount it on the wall of the house. This can be done using dowels and anchors.

In general, as you can see, if you have the desire and time, you can not only design an original house for posting mail, but also, thereby, give your country estate an original style, where the mailbox can act as a business card of your property and your taste.