The most expensive audio systems. The most powerful speaker system in the world. Speakers with the highest sound resolution

Acoustics as the science of radiation and propagation of waves in elastic media is beautiful in its completeness. Its main equation was derived back in the 19th century, and at that time its solutions were obtained for many ideal and special cases. They, of course, find application in practice, but reality turns out to be much more complicated than theoretical schemes. An example of this is sound reproduction, or rather the development of acoustic systems capable of recreating those waves in the air that were previously recorded in one way or another on various types of media.

The flight of fancy in this matter at various stages was limited by the development of related industries: electrical engineering, materials science, machine tool building, etc. And devices were born that we now call speakers, which still amaze our imagination. Many have already passed into history, leaving behind, nevertheless, a bit of experience for the general treasury of speakers developers, and some of it is in memory or relevant to this day.

Altec A7 "Voice of The Theater"

If we start talking about legendary speakers, then we should start with these. Initially, they were intended for dubbing soundtracks in cinemas, which they did with success throughout their existence on the market from 1945 to the 1990s. At the time of their release, they were truly revolutionary speakers with an Alnico V permanent magnet in the engine. Over the years, several models with the letters A in the name have been released: A2, A4, A7, A5. In 1953, Voice of The Theater speakers were declared the world standard for use in cinemas, and in 1956, production of the 820A version for home use began. They can still be seen today in the audio tracks of fans of vintage equipment, as well as for sale on the secondary market. The most common combinations used in these speakers are Altec 288 drivers, Altec 515 woofers, 828 cabinets and 511 horns, but many other combinations exist. The sound of “Voices” is distinguished by the expressive and soulful presentation of vocals and instrument parts - this is typical of speakers with a horn design. At the edges of the range, things are not so good, which is not surprising given the thin-walled plywood cabinets, aluminum diaphragms of midrange/high-frequency drivers, as well as the limitations inherent in horns. Retro sound enthusiasts still share recommendations for bringing sound quality to modern levels. But is it worth the effort? The inherent signature of Altec speakers is their main asset, so it's best to leave everything as is and enjoy the acoustic journey through time.

BBC LS3/5

Perhaps nothing else has provided such impetus for improving speakers as the development of near-field monitors for the studios of the British Broadcasting Corporation BBC. By the end of the 50s, in connection with the advent of the stereo format, it became necessary to replace the bulky speakers that existed at that time with something more compact, leaving room for employees and other equipment in field studios. An order was formulated, and there were many engineers ready to work on this problem. Among them are the talented scientist Del Shorter, Dudley Harwood (founder of Harbeth), Raymond Cook (KEF), Spencer Hughes (Spendor) and others. Thin-walled enclosures and new material– plastic, not paper – for speaker cones. Later, D. Harwood found an even more suitable polypropylene, on the basis of which the membranes of many midrange/bass speakers are created to this day. The design of the BBC LS/5 speaker turned out to be so successful that it was produced under license by 11 companies over the years, and it also became the inspiration for similar solutions in their various variations. The assortment of Harbeth, Spendor, Graham Audio, Falcon Acoustics, Stirling Broadcast still has speakers in this already retro style, but quite modern in sound quality.

Tannoy Monitor Gold

Advantages of a coaxial (or coaxial) arrangement of the midrange/woofer and tweeter from the point of view of radiation theory sound waves are quite obvious (a full-range speaker is even preferable, but also more difficult to implement). This design - Dual Concentric - was proposed in 1948 by Tannoy, a leader in the development of electrical technology in the middle of the last century. On a powerful cast frame, a compression HF head loaded on a horn and a low-frequency speaker were coaxially installed in it, and one magnetic system with two working gaps was used. The 12-inch model was released first, followed by 15- and 10-inch models. On their basis, studio monitors were built, which were widely used at that time. At one time, kits were also produced for self-building speakers, which included a coaxial speaker, a crossover/tuning unit and a panel with connectors for connection. Hobbyist enthusiasts around the world have created a true speaker culture with Monitor Gold speakers. And the Tannoy company offered many series of models, both for professional use and for home systems, but the most often mentioned body is the Lancaster and, accordingly, this is the best-selling bass reflex model with a 15-inch speaker in the 60s.

Klipschorn

This is the only speaker model that has been in continuous production since its inception in 1946 - only minor changes were made to it in 2005. It was developed by the company's founder, Paul Wilbur Klipsch, with the goal of most fully and accurately conveying the sound of a live concert performance at home. they are striking in their dimensions and body design, which perfectly contribute to the solution of the task and are quite acceptable for American music lovers, who, as a rule, have spacious houses. The speakers are designed for installation in the corners of the room - this is required by the acoustic design of the 15-inch woofer, which is a three-way exponential folded horn. An inch compression tweeter and a two-inch midrange driver of the same type are loaded onto exponential horns. These giants, created before the era of semiconductor amplifiers, have a high sensitivity of 105 dB, a flat frequency response and a low level of nonlinear distortion. They are able to fill huge spaces with high-quality and very loud sound, and therefore find fans all over the world.

JBL L100/4310

The cramped conditions in recording studios led to the development of the JBL 4310 monitor speakers, followed by the JBL L100 home speakers, the best-selling model of the decade starting in 1970. 43-series monitors were widely used in the 60s, but the growing complexity of mixing consoles led to an increase in the physical size of electronic equipment, and the “housing problem” was proposed to be solved by reducing the size of the speakers. The result was the 4310, which could be mounted on a cantilever bridge, control room window shelf, or ceiling mount. It quickly gained popularity and became widely used in the United States, particularly in Hollywood, and then in other countries. The owner of the company, which changed at that time, considered it promising to release a household version of the 4310s. A number of design simplifications were made, and in order to make the speakers recognizable, unusual protective grilles made of painted foam were invented for them - in a home interior, as a rule, grills are not removed. The name “The Century” was invented for the model, explaining its trade index L100. JBL recently released a modern version of its famous speakers - .

Bowers & Wilkins Nautilus

Unique and beautiful “” is a living legend. Created in 1993 based on the results of unrestricted research, they are still produced today, although not in large numbers. But it cannot be said that the funds spent on their development did not pay off, because the technologies used in them have found wide application in other, more mass-produced Bowers & Wilkins products. The unusual shape of the speaker cabinets is a creative rethinking by the designers of the scientific principle of loading tubes. They allow the speakers to operate in near-ideal conditions - as if they were built into an infinite flat screen. In this case, the wave emitted by the back of the diffuser does not affect the sound. In conventional housings, absorbing materials are used for this, and in the load tube, in addition to them, the shape itself seems to take the back wave away, preventing it from affecting the membrane. The dimensions of the tubes are determined by the operating frequency ranges of the heads, so the especially long one, intended for the woofer, had to be rolled into a spiral. Nautilus speaker cabinets are cast from Marlan, a highly durable mineral-filled synthetic resin, and then hand polished and painted.

Waterfall Niagara Platinum

Lovers of high-quality sound and Hi-Fi equipment often disagree on how the living room in the house should look with their other halves. There is even such a thing as “women’s acceptability factor” (acceptability factor for women). The gallant French from the Waterfall company proposed a reasonable compromise in 1996 - making the speakers transparent. But what about internal standing waves, which are usually fought by filling the hulls? sound-absorbing materials and lining the walls with heavy bitumen? It turns out that glass is not such an inappropriate material. If it is thick and rigid, then it is quite capable of coping with the resonances of the body. However, to work with it, you need to master special technologies, in particular gluing. The Waterfall speakers also use speakers with proprietary acoustic design ADT (Acoustic Damping Tube), which prevents the wave emitted by the rear side of the diffuser from escaping into the body, and the energy low frequency sound, which does penetrate into it, is absorbed by a passive radiator built into the base panel. It also helps create bass. Waterfall currently has three models of glass speakers in its assortment. with a horn-shaped tweeter - its flagship.

Quad ESL-57

Sound waves, when certain conditions are met, are created by oscillating objects (but don’t think that the wind is blowing, because trees are swaying). The requirements dictated by the laws of acoustics, however, are quite contradictory, which leads to the need to divide the frequency range between two or more speakers. This is a very light film big size can oscillate in piston mode within a very wide frequency range - provided that certain requirements are met, in particular, with a uniform application of driving force over its entire area, which is ensured by the design of the stators.

The Quad company managed to put this ideal situation into practice in 1956, and the following year the first electrostatic speakers Quad ESL-57 went on sale. Between two charged stators, under the influence of a musical signal, a thin film of plastic moved between two charged stators, creating a sound that was devoid of many of the disadvantages inherent in speakers with electrodynamic heads. Very fast response, no mismatch problems, low nonlinear distortion - all this provided unprecedented detail, transparency and dynamics. They were produced almost unchanged for 28 years, and their descendants are now present in the Quad range.

Revel Ultima Salon2

Almost every speaker manufacturer claims that their goal is to produce speakers that most accurately recreate recorded sound. However, few of them can boast that they use the most advanced scientific methods in their development. But Sidney Harman, one of the most famous people in the Hi-Fi world, founded the Revel company in 1996, whose engineers were tasked with making the best speakers, without limiting themselves with funds and without regard to the prospects for their sales. This was possible during that favorable period for the US economy. Well-equipped laboratories, Hi-tech, the use of psychoacoustics methods - everything was put into action. As a result, many excellent product lines have emerged, led by the flagship Ultima2 series, which was released in 2007. Its senior model, Ultima Salon2, is a four-way floor standing speaker with a rounded body made of nine layers of MDF, as well as a 2.5-inch front panel with a complex shape optimized for sound diffraction. The tweeter dome is made of beryllium, the RF emitter is placed in a shallow horn waveguide with an acoustic lens. The concave cones of the remaining speakers are titanium. Revel is part of Harman International Industries, and its products are widely used in many products from other brands.

Cabasse La Sphere

Coaxial radiators, combining a tweeter and a midrange speaker in one unit, have become widespread. Structurally, this is most often a dome HF head located in the center of the midrange cone diffuser. The French company Cabasse, based, by the way, in Brittany, in the same place where the navy with its hydroacoustics is located, has developed and produces coaxial modules with a flat ring, rather than a cone. The pinnacle of her engineering creativity is the La Sphere speakers, in which the idea of ​​putting a point sound source into practice is taken to its logical conclusion. The speaker is a four-way coaxial driver housed in a spherical housing with an inch dome tweeter in the center, two midrange drivers with ring diaphragms and a woofer with a concave 56-centimeter membrane. Matching the radiation of these components is a difficult task, so La Sphere is equipped with a separate active crossover and eight power amplifiers. The second, also four-way, speaker of the flagship series, L’Ocean, has similar electronics built in, and its weight is 120 kg - versus 98 kg for the larger La Sphere.

To be continued…

This article has been read 6,017 times.

We discussed it once - everything is very strange there. Exactly like in these expensive speaker systems. Does anyone know how much quality they cost?

This selection does not cover speakers produced on special order in quantities of several copies. We are talking only about those acoustic systems that are mass-produced.

German Physiks THE GAUDI MK II – 276,000 euros

Branded omnidirectional DDD drivers with carbon diaphragms, frequency response 16 -24,000 Hz, separate bass modules - all according to the canons of the genre. To drive, you will need three amplifiers for each band (200 - 350 W), then the speakers will be able to develop sound pressure up to 120 dB.

Zellaton Statement – ​​300,000 euros

Absolutely tolerant to housing resonances, special drivers. The weight of one speaker is 300 kg, 11’ low-frequency woofers are used, the frequency response starts from 20 Hz. The amplification requirements are gentle - only 50 W.

Goldmund Apologue Anniversary – $550,000

Don't confuse these speakers with Epilogue (the latter are cheaper). Goldmund Apologue is equipped with built-in 3,600 W amplification and can receive a signal via Wi-Fi. In general, everything is fine (if you don’t look at the price).

Tidal La Assoluta – 572,000 euros

485 kg of weight per speaker, diamond speakers are used not only on the high frequencies, but also on the midrange (unique drivers with a diameter of 135 mm are produced only for Tidal, with a circulation of only 20 pairs per year)! Frequency response in active activation from 20 Hz, low-frequency woofers 10’. A work of art, not a technique, that’s for sure.

Wilson Audio WAMM Master Chronosonic – from $700,000

keletonized housings made of proprietary X-Material and S-Material composites, an impressive set of drivers (paper diffusers!) and frequency response from 20 Hz. What more could you want?

This is a copy of the article located at

The standard acoustics of laptops and TVs often do not satisfy the needs of buyers, so the latter are increasingly thinking about purchasing an additional acoustic system.

The general classification includes 8 types of acoustics, the most extensive of which is the class of front speakers. They form the core of a stereo system and, in the case of a multi-channel connection, can be used as independent stereo sources.

Already now the systems market is more than oversaturated and many companies cannot compete. We have selected for you the top 20 best speaker systems in five categories, they are:

• built-in;
• concert;
• hanging;
• floor;
• shelf

The best built-in speaker systems

Small and compact systems for integration into furniture to save space in the home.

4 SVEN SPS-821

Unkillable classic
Country: China
Average price: 3370 rub.
Rating (2019): 5.0

For 15 years now, the SPS-821 has confidently retained its status as one of the best indestructible sound systems in the world. The subwoofers and satellite are made of MDF, and there are tone controls for both low and high frequencies. The total power is 40 W, and this is not a marketing figure, but a real characteristic. Serves its owners for a long time and faithfully.

Among the shortcomings, we can highlight peaks at 85 and 125 Hz, which are treated by the sound card’s equalizer. Perfect for both inexpensive solution for a house or apartment. It can be used as a built-in one, since all the controls are located on the front panel. The 821 model was a reincarnation of the 820, but with a more modern color scheme and a 20 mm larger bass driver.

3 Polk Audio RC55i

Optimal price
A country: USA (made in China)
Average price: 18,000 rub.
Rating (2019): 4.9

We can characterize not the most budget acoustics in our top as “good average”. The lower frequency threshold here is not the best - 67 Hz, so the buyer will have to buy an additional subwoofer or simply not focus on low frequencies.

To be fair, we note that, having sacrificed the characteristics, the manufacturer skillfully dealt with the dimensions, since the speaker itself is very compact. Weight of almost 2 kg will allow you to transport it with you and build it into any closet. The 5.25-inch speaker has dynamic balance settings that allow you to customize full bass. Rubber seals protect against moisture and dust. Another big plus is the long warranty of 5 years.

2 Jamo IW 606

High maximum power (120 W)
Country: Denmark
Average price: 34,000 rub.
Rating (2019): 5.0

The Danish company Jamo definitely knows a lot about acoustics and has in its arsenal such a model as the IW 606. The main trump card is increased maximum power at 120 W with a starting 60. It is worth noting that for stable operation it is better to use base frequencies, since at maximum the components wear out quickly. At 60 W, the IW 606 reveals its full potential and serves its owners for a long time.

The only fly in the ointment was the lower level of reproduced frequencies. The minimum mark of 65 Hz makes sound lovers think about buying an additional subwoofer. If you wish, you can make complaints about the modest design, but we repeat - appearance is not the main thing in a sound system unless you are building a studio or a custom one.

1 Klipsch R-3800-W

Best Sound Quality
Country: USA
Average price: 26,000 rub.
Rating (2019): 5.0

Here is one of the best acoustic systems in the middle price segment, especially for those who do not want to save on sound, but also prefer to refrain from overpaying. In terms of quality and characteristics, the model meets all the needs of even the most demanding customers. The rated power of 50 W is not a standard and the ultimate dream, but the speaker will fit perfectly into a home theater with a frequency range from 46 to 20,000 Hz. I am glad that the Americans did not chase the excess frequency range, which allowed them to reduce the price of the product.

The system does a good job of creating stereo effects, but experienced buyers in their reviews recommend purchasing an additional subwoofer for greater clarity of the lower frequencies, which are rather weak. As an addition we can note pricing policy company – for several years now the price of the system has remained at around 26,000 rubles.

The best concert speakers

The most expensive and powerful systems for concert performances with high performance.

4 JBL 305P Mk II

The best choice
Country: China
Average price: 15550 rub.
Rating (2019): 4.9

The updated line of JBL monitors starts with the 305P version, which we’ll talk about. The kit includes instructions, a cable and stickers on the bottom, since there are no legs. IN new version The backlight has been adjusted and the monitor will not hurt your eyes at night. The low-frequency driver has reduced distortion and improved linearity.

Their main disadvantage is their terrible design. The glossy front panel easily collects fingerprints and shines in bright light. To be fair, we note that there is more than enough bass here. Amazing detail of the sound picture was achieved thanks to a high-quality component base. Super strong bass resonates even at low volumes when placed close to a wall. If you put one of these at home, you will immediately notice multiple noises. The model is positioned as a budget concert option and occupies a leading position in popularity among buyers.

3 Yamaha S112V

Proven model
Country: Japan
Average price: 34,900 rub.
Rating (2019): 4.9

A model that in its entirety resembles an old, but high-quality classic. A two-way loudspeaker from a Japanese acoustics manufacturer is used primarily at club parties, as its sound quality fully satisfies the midnight hubbub. Unfortunately, it is impossible to say that they are ideal. The build quality leaves much to be desired - the body is a mediocre product made of cheap plywood, which requires periodic tightening or complete replacement of fasteners.

When playing sound, slight distortions are observed in the mid-frequency region, which even non-professional listeners can detect. But the cutting of high frequencies occurs quite delicately - here inaccuracies pass unnoticed. A good representative of concert acoustics, providing adequate performance for its price.

2 Yorkville YX15

Optimal price
Country: USA
Average price: 20664 rub.
Rating (2019): 4.9

An interesting concert loudspeaker that provides stable good quality sound at all levels of the reproduced frequency. Perhaps the characteristics of this model are affected by the relatively recent release date, since in terms of operation, the Yorkville YX15 is superior to the competing acoustic model from Yamaha. Less powerful, but much more balanced, it plays sound with a frequency from 60 to 20,000 Hz, and does it much cleaner than its opponent. It has a built-in overload protection unit, so it does not burn or fail even under conditions of inadequate operation. The walls of the case are made of MDF with a thickness of 18 millimeters, and in such a way that when purchasing you do not have to tighten the fasteners yourself. In general, in terms of design, the Yorkville YX15 leaves many people out of work - both the horn and the low-frequency speaker are “packed” under the grid, which, alas, is sorely lacking in the Yamaha S112V.

1 RCF TTL11A-B

Best power rating (4000 W)
Country: Italy
Average price: RUB 391,622.
Rating (2019): 5.0

A top-end acoustic system for concerts, but not very popular due to its price. Special drivers accumulate all incoming sounds and convert them to transmit the entire sound picture. Additionally, you can control the sound angle, which varies from 0 to 7 degrees in 8 preset profiles. This reduces the echo effect.

The amplifier has a special network card with an RS-485 communication protocol for monitoring system parameters, more detailed control and creating profiles. Despite all the above advantages, the manufacturer left the option of using this model in conjunction with the TTS25-A subwoofer to enhance the low-frequency range. The maximum declared power is 4000 W.

The Best Hanging Speaker Systems

If you don't have floor space, don't like built-in systems and want to create a surround sound field, this category is for you.

4 DALI ALTECO C-1

Universal monitors
Country: Denmark
Average price: RUB 18,900
Rating (2019): 4.8

The versatile and musical suspension system is applicable in stereo, multi-channel and DolbyAtmos. If you remove the grill, you can see the front panel is recessed into the body, which reduces free space and gives directional sound.

Place it on top of a floor-standing speaker and get the DolbyAtmos effect of a movie theater. By hanging it on the wall, the model can be used as rear or side speakers in a home theater. In normal mode, the radiation is directed perpendicular to the plane of installation of the speakers, but if you use a special switch, the tilt angle becomes 25 degrees. In this way, the flow of sound to the listening location can be controlled.

3 JBL Control 28

Best workmanship
Country: USA
Average price: 26,300 rub.
Rating (2019): 4.9

A very popular front-type suspended speaker, the quality of which surpasses the lion's share of competing assemblies. First of all, what is striking is not even the fact of factory quality, but how long the JBL Control 28 can be in operation. The reliable MDF housing contains a low-frequency paper emitter and a titanium horn operating at high frequencies. With adequate use, such a column will last for more than ten years.

But the sound quality, unfortunately, leaves much to be desired. The reproduction of mid and high frequencies does not cause any particular distortion, but you can expect something colorful from this process not worth it. JBL Control 28 is designed specifically to accompany exciting TV pictures with moderate sound, without going to peak volume. This is the case when the price is fully ensured by the reliability and quality of workmanship.

2 Monitor Audio Radius R225

Wide range of reproduced frequencies (55-25000 Hz)
Country: UK
Average price: RUB 37,990.
Rating (2019): 4.9

A product from a British manufacturer, characterized by a wide frequency range of sound reproduction. Each individual element of the Monitor Audio Radius R225 paired speakers exudes the grace and subtle design of the designer. In the hope of standing out from the general background of most competitors, the developers decided to slightly reduce the parameters of the width and depth of the model - they are equal to 120 and 105 millimeters, respectively. Despite this, they managed to fit almost all the top-end stuff into the system in order to create significant competition in the global market.

The main advantage of the speakers is their exterior. The consumer can choose from two options for finishing the case - natural beech or rosewood veneer with white, black or silver varnish. Considering all of the above, the cost of the system seems quite fair.

1 Sonus Faber Wall Domus

Best power dynamics
Country: Italy
Average price: 42,770 rub.
Rating (2019): 4.9

Hanging speakers very rarely outperform floor-standing models, but in terms of quality they can be head and shoulders above. The Italian company Sonus has spoiled all lovers of good sound with an original pair acoustic speakers, the use of which forms a very clear sound picture. A completely standard frequency range is complemented by 150 W of rated power and not too high sensitivity (about 88 dB), so to “boost” the system, amplifiers with approximately the same power characteristics are required. One of the nice features of the Faber Wall Domus is the presence of magnetic protection that protects the speakers from overload. Otherwise it's almost standard system, the total weight of which is almost ten kilograms. The overall cost may scare off a potential buyer, but the money spent is guaranteed to pay off with many years of operation and high sound quality.

The best floor-standing speakers

Standard floor systems for owners of large living spaces or those who like to perform outdoors.

4 SVEN MS-302\304

Buyers' choice
Country: China
Average price: 3070 rub.
Rating (2019): 4.7

Externally this system resembles a mixture washing machine And music center. Don’t forget that appearance is not the most important thing in acoustics, so among the advantages we’ll focus on an absolutely brutal subwoofer within its class. A plus for many will be the output for connecting MicroSD cards.

Bass on a small scale is more than good here. The satellites are assembled with high quality, have magnetic shielding, and they sound good. 40 watts of output plus a good volume reserve made the MS-302 a favorite on the market, and on Yandex the product has the honorable status of “Customers’ Choice.” By paying an extra 200 rubles you can buy the MS-304 version, which has a more stylish design and Bluetooth.

3 DALI Zensor 5

Good value for money
Country: Denmark
Average price: 39,500 rub.
Rating (2019): 4.7

Another representative of Denmark, which has established itself as a strong middle peasant in the acoustics market. Despite the release of newer models in the series, DALI Zensor 5 continues to enjoy stable demand among users. There are several reasons for this: firstly, its balance played an important role in the popularization of the product. Standard power and sensitivity indicators (150 W and 88 dB, respectively) are complemented by good high-frequency susceptibility (up to 26,500 Hz).

Among the structural features, it is worth highlighting the presence of two speakers responsible for low frequencies, due to which a full-fledged effect of the presence of a subwoofer (low-power budget subwoofer) is created. But some consumers consider the weight of the product to be a disadvantage. How legitimate this remark is is unknown, but it should be noted that some competing systems weigh much more.

2 Canton GLE 476

The most reliable system
Country: Germany
Average price: 54,990 rub.
Rating (2019): 4.9

A system that is a kind of message for all lovers of rich sound. This is an amazing combination of pure, detailed sound down to the smallest particles and a good job of providing the right acoustic effect. Reproducible frequencies range from 25 to 30,000 Hz, which virtually eliminates the need to purchase a subwoofer. The system power rating is limited to 110 W, with a maximum power rating of 170 W that will not cause speaker damage.

One of the features of the front speakers is the presence of, in fact, a three-channel sound emission system, with a remote speaker for mid frequencies. But the high-frequency emitter has undergone a ruthless reduction - its diameter is only 25 millimeters. However, this does not prevent the system from processing peak values ​​smoothly and without distortion.

1 Heco Victa Prime 702

Low price
Country: Germany
Average price: RUB 33,900
Rating (2019): 5.0

One of the obvious leaders in the rating in terms of sound purity and reproduced frequencies. One of the lowest prices for the product allowed the company to acquire a large circle of fans and collect all the best characteristics for its segment.

The rated power starts at 170 W, and at its peak reaches 300. The frequency threshold of 25 Hz is not something supernatural, but its maximum is 40,000 Hz, which is beyond human perception. The main advantages of the model include the pleasant finish of the case. A complete system consists of two speakers, which is why PRIME 702 can be placed in any interior. This option is deservedly considered one of the standards for quality and durability.

The best bookshelf speakers

Small sound systems for those who like to save space in the house.

4 Defender Ion S10

Ultra-budget segment
Country: China
Average price: 1206 rub.
Rating (2019): 3.9

An ultra-budget solution for those who want to get an inexpensive speaker system for their home and save money. The main advantages include a pleasant design. Deep and soft sounds can be easily adjusted with an equalizer and other software. The compactness is also pleasing; the system can be placed on a shelf or table and enjoy the sound.

For such a low price you have to pay. The incredibly low power of 10 W and the 2.1 sound system can only be played by 2 speakers in stereo mode. The case also leaves much to be desired, since beauty does not in any way affect the strength, and it is not superfluous, since it is made of plastic. If you turn the volume switch to maximum, the speakers will begin to wheeze and choke.

3 JBL LSR308

Better system balance
Country: USA
Average price: 22930 rub.
Rating (2019): 4.6

Another representative of the American company JBL, purchased by users in place of regular computer speakers. It is not known for certain why there was such a big stir around this particular model. It is indeed full of advantages, but at the same time it is often not without its disadvantages. For example, some models emit constant background noise at medium and high frequencies, even when properly connected and powered from an alternative power supply. But at the same time, both in terms of power and other key parameters, the speaker is at a stable competitive level. The price is not overpriced, adequately corresponds to the declared characteristics, but also does not spoil potential buyers with its modesty.

2 Pioneer S-DJ50X

High quality workmanship. User selection
Country: Japan
Average price: 10992 rub.
Rating (2019): 4.6

This bass reflex loudspeaker Pioneer S-DJ50X is designed to complete multimedia devices, including desktop computers. The successful combination of stereo speakers and amplifier functions is an improvised “paradise” for a true music lover. The total bass boost is 26 W, and the high boost is up to 54 W. Coupled with the rated power of the emitters (80 W) and the ability to reproduce sound with frequencies from 50 to 20,000 Hz, the Pioneer S-DJ50X can be a good purchase on the verge of professional equipment.

The only significant shortcoming of the technology comes down, in essence, to the omission of the manufacturers. The meager package, which includes only the power cable and the system itself, causes some inconvenience to users, which the latter could not help but mention in reviews.

1 Yamaha HS8

Wide range of reproduced frequencies (38-30000 Hz)
Country: Japan
Average price: 21,900 rub.
Rating (2019): 4.8

How often does it happen that seemingly ideal technology lacks greater internal potential. But the Yamaha HS8 is exactly the opposite case. The controversial appearance (not too terrible, but not the most beautiful) is compensated by the original combination of high power (about 120 W) and frequency range (from 38 to 30,000 Hz), providing the system with the ability to accurately convey to the user even the most insignificant touches of sound, beauty and falsehood of recorded music. The built-in amplifier also provides a significant increase in power: for low frequencies up to 75 W, and for high frequencies – no more than 45 W.

Despite the above-mentioned unsightly appearance, the housing design is highly reliable. The box itself is made of MDF, which increases the weight of the system to ten kilograms. Of course, the price of “under 20 thousand” can scare off some buyers, but this model still cannot be called expensive.

Speaker systems consist of speakers that are used to listen to music or watch videos.

When choosing designs, you should pay attention to the dimensions of the products, functionality and specifications sound: sensitivity, power, resistance. Be sure to check the availability of the warranty card and maintenance instructions.

How to choose a speaker system

• Pay attention to the material of the speaker system housing. The highest quality speakers are those made from MDF. Chipboard models are fragile and do not tolerate moisture. A popular finishing option is plastic; this material is quite wear-resistant.

There are products made of metal. Among the alloys, aluminum is most often used, which provides good mechanical properties of the body.

Such products have high rigidity and density, low weight, the only disadvantage is their unnatural sound.

• Look at the type of speaker system. Active devices use amplified speakers, and crossover filters are located at the output of the amplifiers. The advantage of passive devices is that there is no need to supply voltage to each speaker.
• Pay attention to the power of the speakers.

For a room of 20 sq. m. you will need an acoustic system with a power of 60-80 W, for rooms of 20-40 sq. m. m. this figure reaches 100-150 W.

For large rooms you will need speakers with a power of up to 500 W. The sensitivity of the device determines the volume of the speakers.

• The sensitivity of the system is responsible for the purity of sound. It is desirable that this characteristic reaches 75 dB.
• Pay attention to the frequency range of the models; it is best if the model perceives sounds in the range of 16-20000 Hz. If you need acoustics for a home theater, then the frequency range varies from 100 to 2000 Hz.
• Be sure to look at the connection type. The most popular are speakers with a mini jack cable. Connection using tulip cables is also used. There are models equipped with wireless communications: Bluetooth, NFC.

• Look at the package contents of the product, the presence of a warranty card and technical instructions. It is advisable to buy products from trusted manufacturers.
• Be sure to look at the dimensions of the structure; it should be compact and transportable. The less the product weighs, the less space it takes up. The greatest space savings are distinguished by Acustic systems wall type.

1. The kit often includes wireless control panels; they make it possible to adjust the sound volume and change settings from a distance.
2. Buy speaker systems that are equipped with the ability to listen to the radio. Pay attention to the built-in player with a slot for memory cards.
3. Using information displays, sound parameters are adjusted and changed, and the technical characteristics of the model are configured.
4. Please note that the speaker system is equipped with an output; this option will be useful for those who like to listen to very loud music.
5. The design is technically reliable and stable, with high-quality fastening. Choose floor-type models; systems that are mounted on walls look beautiful.
6. See if the design is equipped with bass and treble controls.
7. Pay attention to the type of amplifier. External amplifiers are separate devices to which the system is connected. Internal amplifiers are a set of chips that are built into a speaker or subwoofer.
8. Buy products that use magnetic shielding technology.

1. Look at the design of the speaker system. Laconic products are suitable for equipping modern interiors; classic style requires beautiful exterior decoration.
2. Pay attention to the color of the product. The model should complement the interior favorably, fit into the overall style of the room, match the furniture, and the design of the walls, floor and ceiling.

Best Floorstanding Speaker System

Cerwin-Vega XLS-15

Cerwin-Vega XLS-15

An acoustic system equipped with low-frequency and mid-frequency speakers and a woofer. The amplifier provides effective work. The signal is practically not distorted, since a separation filter is used.

The overall sensitivity of the speakers is high. There are fuses to protect the system. The protective transparent wall allows you to camouflage the speakers well. With proper use it will retain its technical characteristics for a long time.

Characteristics

• rated power – from 250 to 500 W;
• open type of acoustic design;
• dimensions – 470 by 430 by 1030 mm;
• weight – 38.5 kg;
• sensitivity – 92.3 dB;
• passive nutrition;
• number of speakers – 3;
• equipped with a protective fuse;
• frequency – from 36 to 20000 Hz;
• magnetic shielding;
• recommended power – 400 W.

pros

• large-scale detailed and surround sound;
• good volume;
• high-quality housing, stylish design;
• technical safety.

Minuses

• Bass is hard to hear.

The best closed speaker system

Magnat Monitor Supreme 102

Magnat Monitor Supreme 102

An acoustic pair is used as an element of a home cinema. The sound is soft, over a wide frequency range. The model has a durable body that absorbs possible resonances and vibrations.

Bass reproduction leaves much to be desired. The products operate in the frequency range 42-36,000 Hz.

Characteristics

• type of construction – passive;
• kit 2.0;
• equipped with two lanes;
• sensitivity level – 89 dB;
• resistance – 8 Ohms;
• total power – 120 W;
• frequency range from 42 to 36000Hz;
• magnetic shielding;
• dimensions 25 by 15 by 19 cm;
• weight – 2.8 kg.

pros

• clear sound;
• high quality workmanship;
• use of magnetic shielding technology;
• high resistance;
• affordable price.

Minuses

• Bass reproduction is poor.

Best TV Speaker System

Samsung HW-E550 Sound Bar

Samsung HW-E550 Sound Bar

The model has high sound power - 310 W, is equipped with a wireless subwoofer, HDMI, Anynet+, USB, Bluetooth and other functions. Soundbar placed horizontally above or divided into two vertical columns.

In the latter case, it will take the form of a two-channel speaker system. Features – high-quality volume control, optimization of sound settings. The product is made in a laconic style and is convenient to mount on the wall.

Characteristics

• type – sound active panel;
• total power – 310 W;
• number of columns – 1;
• closed type housing;
• equipped with Dolby Digital, DTS decoders;
• dimensions – 290 by 370 by 290 mm;
• wireless subwoofer connection;
• line input (stereo), USB Type A;
• equipped with a remote control.

pros

• compact size, easy installation;
• high-quality and surround sound;
• convenient and simple remote control;
• functionality, many outputs;
• high-quality housing.

Minuses

• settings are not saved after turning on or off;
• The subwoofer requires connection to sound sources.

The best speaker system for a computer

Edifier S2000

Edifier S2000

The structure has a stylish design, the surface is finished with piano varnish, the speaker housing is made of fiberboard. An external amplifier unit with a built-in Burr-Brown BB1732 DAC is used.

The acoustic design is displayed on the front panel. The speakers are used for home studios; the sound quality is close to that of active studio monitors.

The design is equipped with special legs. High-quality equipment, the delivery set includes two speakers, a power cord, a remote control and technical instructions.

Characteristics

• acoustics form – 2.0;
• type – stationary;
• frequency range – from 20 to 20,000 Hz;
• body material – wood;
• protection – magnetic shielding of speakers;
• equipment (two speakers, wired remote control, power cord, instructions, packaging);
• Dimensions – 172 by 296 by 215 mm.

pros

• ensuring high-quality sound;
• digital input;
• wireless remote control;
• equipped with screw terminals;
• beautiful appearance, stylish design.

Minuses

• high price.

The best speaker system for your home

HECO Victa Prime Center 102

HECO Victa Prime Center 102

Passive speaker system with powerful amplifier(150 W), bass reflex, magnetic shielding. Resistance reaches 4-8 ohms. The device operates in the frequency range 35 Hz-40 kHz.

Characteristics

• type – passive, bass reflex;
• set contents – 1 column;
• power – 150 W per channel;
• 2 stripes;
• sensitivity level – 90 dB;
• magnetic shielding;
• two speakers;
• dimensions – 480 by 155 by 265 mm;
• body material – MDF, wood;
• weight – 7.8 kg;
• frequency – 50/60 Hz;
• kit (column, instructions);
• finishing option - vinyl.

pros

• high power and efficiency;
• loudspeaker equipment;
• installed on a shelf;
• good sound;
• competent equipment;
• high quality finish.

Minuses

• too accentuated top;
• The bass reflex ports are located at the rear.

Best open speaker system

JBL STUDIO 590CH

JBL STUDIO 590CH

Three-lane open floor model. The body material is MDF, the surface finish is cherry.

High power - 250 W, suitable for equipping large rooms. Model with a passive amplifier type, compact dimensions.

Characteristics

• stereo output signal;
• equipped with 3 stripes;
• amplifier type – passive;
• resistance – 6 Ohms;
• frequency range – from 35 Hz to 40,000 Hz;
• sensitivity threshold – 92 dB;
• power – 250 W;
• open acoustic design;
• 3 speakers;
• body material – MDF, vinyl;
• dimensions – 1263 by 322 by 413 mm;
• weight – 31.5 kg.

pros

• clear and surround sound;
• compactness, transportability;
• high-quality assembly;
• affordable price;
• stylish design, good exterior finish;
• high power.

Minuses

• The sound volume is not suitable for small rooms.

The best speaker system for a conference room

Cambridge Audio G5

Cambridge Audio G5

Wireless speaker system with battery and Bluetooth support. Compact design, shallow body, the front panel of the product is covered with a mesh.

Line-in speakers connect to a standard stereo system. The battery charge lasts for 24 hours.

Characteristics

• configuration – 2.1;
• amplifiers – class D;
• inputs and outputs (linear mini-jack);
• Bluetooth wireless technologies;
• USB charging port;
• time battery life– up to 24 hours;
• dimensions – 270 by 121 by 55 mm;
• weight – 1.3 kg.

pros

• clear sound;
• equipped with audio output;
• functionality;
• use of advanced technologies;
• competent equipment.

Minuses

• Low charge level, does not last long.

The best sound system for a car

MYSTERY MJ 550

MYSTERY MJ 550

The model is a two-way component speaker system with a power of 150 W. The device reproduces frequencies from 60 Hz to 21 kHz. Sensitivity reaches 91 dB.

The system is equipped with four powerful speakers. The metal body is wear-resistant and highly durable. The model is characterized by high power and efficient operation.

Characteristics

• system type – component;
• two stripes;
• power – 150 W;
• frequency range 60 Hz-21 kHz;
• sensitivity – 91 dB;
• resistance level – 4 Ohms;
• equipped with 4 speakers;
• free-standing crossover;
• metal case;
• color – titanium.

pros

• high-quality reproduction of low and high frequencies;
• the body is made of durable and wear-resistant metal;
• high power model;
• beautiful design, stylish design;
• durable speakers.

Minuses

• Suitable only for equipping machines.

Best wireless speaker system

Creative T15 Wireless

Creative T15 Wireless

The speaker system is equipped with separate tweeters that provide clear and spacious sound. BasXPort technology allows you to listen to high frequencies.

The model supports Bluetooth interface. Powered by mains power, equipped with a Line-in input, a special input for . Volume and tone control tools are conveniently located.

Characteristics

• type – 2.0;
• 1 strip;
• mains power supply;
• linear input (mini jack connector);
• Bluetooth wireless connection;
• dimensions – 90 by 200 by 180 mm.

pros

• powerful bass sound, high-quality reproduction of mid-frequency sounds;
• convenient volume control tools;
• The tilt of the front panel ensures optimal sound delivery.

Minuses

• The kit does not include a jack5 cord for connecting to a computer.

Which speaker system to buy

The first thing you need to pay attention to when choosing is power. The frequency range of the model is taken into account; it determines how well high and low frequencies will be reproduced. Among the effective models are MYSTERY, Edifier.

There are open (Edifier) ​​and closed (Magnat) systems; most models are passive systems. Beautiful appearance and stylish design are distinguished by the following models: Cerwin-Vega, Magnat, Samsung, Edifier.

Magnat Monitor acoustic systems are distinguished by their compact size and low weight. The functionality of HECO, Magnat, Edifier products differs.

All models are well equipped and equipped with the necessary accessories. The acoustic systems proposed in the rating are stable and technically reliable.

Any user, if he is no longer satisfied with the sound of the television programs he is watching, thinks about changing the audio system (media system). And if the majority of viewers are content with a more modern model, then there are those who never have enough and constantly want even better. Such people are not satisfied with mass-produced devices. What should we call them? Are they aesthetes or pragmatists? Let's try to figure it out, starting with the most expensive audio system models.

Kipnis' Outer Limits Theater

The exorbitant cost of this home (!) cinema by the manufacturers is explained by the fact that the 8.8-channel KSS audio system is improved by Snell’s subwoofers. They are housed together with the highest quality components in excellent quality cases. Not even any large cinema can afford such an acquisition. It’s hard to even imagine how your favorite blockbuster will look at the Kipnis Theater, which goes beyond imagination. Cost: $6,000,000.

Moon Audio's Dark Star Opulence

The striking power of 31,000 W is capable of drowning out the sound of a heavy airliner starting to take off. Ten meters of speakers coupled with subwoofers, assembled in a frame very High Quality capable of “tearing down the tower” of anyone. Figuratively, of course. And all this beautiful power is backed by a ten-year warranty. Cost: $2,000,000.

Kharma's Grand Enigma

In the manufacture of a unique audio system, an individual design was used, ordered from a Dutch manufacturer specializing in exclusive audio equipment. Unfortunately, this is all the information that we managed to get about this miracle. Cost: $1,000,000.

Goldmund Epilogue Signature Audio System

And this system is valued at one million dollars. There are only 25 sets of such systems with a power of 3,600 W worldwide. It is impossible to find the flaws that plague most mass-produced high-power audio equipment. This equipment can rightfully be called a work of art. Cost: $1,000,000.

Higherfi Audio Opulence

The complete set of this system weighs one ton when assembled! Only ten of these sets were produced. Very high quality equipment for sound reproduction forced true music lovers to line up behind them - they were so amazed by the delightful sound of the speakers. Cost $925,000.

Wisdom Audio's Infinite Wisdom Grand

This audio system was developed exclusively for royal palaces. The height of the speakers reaches four meters and it can handle not only a large house or a swimming pool, but also an entire castle. Its weight is 2,000 kg, and the waterfall of sound is so powerful that it must be handled with care. Cost $700,000.

Backes Muller BM 100

The unusual shape of this audio system is explained by the introduction of technology that allows the system to draw an ideal boundary between high, mid and low tones. It could well be mistaken for elaborate furniture that belongs in the bedroom of a beautiful woman. As its creators assure, the system is capable of filling a room of almost any size with sound. And he will choose the most best option. Cost $500,000.

California Audio Technology (CAT) MBX

The manufacturer of the presented audio system became famous thanks to projects that are striking in their grandeur. The most impressive examples produced by SAT use hundreds of subwoofers alone, and moreover, more than a dozen channels. Wealthy connoisseurs are willing to pay more than one million dollars for such monsters. But among them there is also an option suitable for home use, for which you will have to pay only $500,000.

Acapella Audio Arts' Sphäron “Excalibur”

To fully understand the 3D effect of the sounding audio system, it is recommended to choose a room measuring 40 square meters or more. Sounds are produced by twelve square meters - this is the surface area of ​​the speakers. And it feels like the sound is coming from everywhere. Cost $380,000.

Dynamikks Ultima!

The extremely powerful speaker produces sound whose range ranges from 150.0 Hz to 23.0 kHz. An expensive case measuring 1m x 1m is used to house the musical heart of the system. Impressive! The price of this miracle is $380,000.