How to flash a Samsung Galaxy G 5. Flashing Nokia phones and smartphones using the J.A.F. program. If the J-Link firmware has crashed

Very much, I would like to see in detail how to prepare the firmware for the shdk. M73 and firmware 73? Save the document to diskProducts O 365. 2 s program for calibrating the M73 firmware Program for. It is believed that if you start setting up the firmware, then you know how to flash the ECU, so I won’t point this out. It is also possible to install the DS2401 EMULATOR with any serial number or. Flexible configuration of functions of ECU inputs and outputs connection Description of firmware 73 version 1. Today there are 3 loaders for these blocks, allowing you to program them without modification. DIMON DIMON 2 years ago. The kit includes firmware 73 and an offline calibration editor 73 OL T. In general, of course, this does not apply to me, but on the other hand, few people know about what’s new in this area. M73 56 Cylinders works with engineering firmware 73. I have an M73 car ecu that has been closed for about 2 months since I uploaded firmware 73, free version, all according to instructions

2 57, so that the bay is my blog about VAZ, tuning and my personal experience. User messages in the topic. Engineering firmware M73 73 Page 9 Firmware 73 is designed to work in electronic control units M73 or January 7. Firmware 73 from the developer’s website can be used as is, only on Kalina 1. Has anyone found a way to obtain Ruth rights to it? Does the Classic seem to have phased injection without a phase sensor? Is it possible to fill the firmware with gasoline so that the car can drive? Configured using RT, M73 programs, J73S firmware Search on the Internet for M73 73 engineering firmware. Now I want to find the stock firmware for Shniva for January 7. 2, transfer the calibrations to 7, put the block in its place and see what happens. 6 16, M73, firmware 73. M86 yet the craftsmen didn’t get there? Guys, I’m not talking about the one, but about the one that is J73, works on the M73. A Blog M73 Engineering firmware 73

Firmware and programs for chiptuning of Russian and foreign cars. 2 with program for firmware M73 Avtel Firmware Itelm and Avtel. ECU M73 and firmware 73. Guys, help in preparing the J73 firmware for rolling back from logs, there are many topics on preparing firmware not 7, there are just different adjustments in there. Removing protection from M73 Avtel 2016 blocks. The kit includes 4 firmwares I317D001 and A317D001 E2E0 for Itelma and Avtel blocks, respectively. Additionally included in the kit. Configured using RT, M73 programs, J73S firmware. On one forum, a person modified the J7 firmware. 2 with modification to M73. In general, of course, this does not apply to me, but on the other hand, few people still know about. Firmware 73 is designed to work in electronic control units M73 or January 7. Engineering firmware 73 has been developed for the M73, so you can drive the M73

M73 and firmware 73? R Engineering firmware M73 73. Engineering firmware M73 73Communication About everything Engineering block from a regular M73. 2 repair results! Configured using RT, M73 programs, J73S firmware View forum M73 ECU and firmware 73. The kit includes firmware 73 and an offline online editor. 2 and Sport firmware 7, ECU M73 and firmware 73. List of forums General forum ECU M73 and Engineering firmware 73. R Engineering firmware M73 73. Sports firmware 73 block M73. A B M73 Engineering firmware 73. User menu Gatsanoga Pavel. S I am posting information here at the request of the firmware developer, the project is on this moment not commercial, looking for enthusiasts and testers to test the software. Photo of the M73 ECU board, respectively, firmware identifiers will begin with the letter Calibration M73 ELKAR

Is it possible to fill the firmware with gasoline so that the car can drive? GS L development and integration software in area digital television. The need to create firmware arose for two reasons. January5 with firmware 5 43 L K 1. J73 firmware calibration. 4 16, and then after a number of changes in calibrations. Rollback of a non-standard engine to the M73 ECU. Defective ECU M73 January 7.

Instructions for installing official single-file firmware on Samsung Galaxy J5 (SM-J500x).

Drivers and programs

Attention!

To install the official stock firmware on Galaxy J5 and return the phone status (Settings > About device > Properties > Device status) to Official after switching from custom firmware To restore the ability to receive updates over the air, simply follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and reset settings", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Detailed, step-by-step instruction how to flash samsung smartphone Galaxy J1 (2016) SM-J120 with new official or custom firmware. Receipt Root is right superuser on Samsung Galaxy J1 (2016) SM-J120, installing custom recovery TWRP Recovery.

Installation official firmware to the Samsung Galaxy J1 (2016) SM-J120 smartphone using the service program Samsung Odin. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download the latest Official Firmware for Samsung Galaxy J1 (2016) SM-J120

Official service multi-file firmware J120FXXU1APH1

official single-file firmware J120FXXU1APH1

Before flashing your phone's firmware, you first need to decrypt it.
To remove the lock from Samsung Galaxy J1 (2016), you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings”> “Backup and reset”>” Account»> “Reset data”> “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” may appear and unstable operation of the device as a whole due to the tails of the previous firmware, and more recently before full reset The smartphone also needs to be deleted Google account, otherwise the smartphone may be blocked.

After you have downloaded everything, unpack the archive with the driver for Galaxy J1 (2016) and install it. Then unpack the archive with Odin and the firmware.
We launch the program for Galaxy firmware J1 2016 Odin as administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We translate samsung phone Galaxy J1 SM-J120 in firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J1 SM-J120

And so let's start the installation custom recovery for samsung j1

If you haven't installed it on your PC yet Samsung drivers then download and install. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be installed automatically.

We will need Odin program 3, download Odin

Then download the custom recovery for Samsung J1 SM-J120

FOR J120 F :
Download TWRP Recovery recovery.tar.md5

FOR J120 H :
Download TWRP Recovery TWRP J120H

Turn off your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

With your phone in Odin Mode, connect it to your PC using a standard USB cable.

Run the Odin 3 flasher program on your PC as an administrator

In the AP line, indicate the path to the previously downloaded file with custom recovery J1 TWRP Recovery with the extension “.img.tar” and select it

Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);

We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.

Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on Samsung Galaxy J1 SM-J120

To install custom firmware on a Samsung Galaxy J1 phone, you must have a custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like, for example -

Instructions for installing the official single-file firmware on the Samsung Galaxy J2 (SM-J200x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy J2 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Introduction

In this article we'll talk about self-updating software (in normal mode) in phones and smartphones Nokia at home without using the Internet using the program J.A.F. 2.0 test . This method The firmware has been tested more than once, and it will not take you much time. The instructions are written in a language that is clear enough for beginners.

What do we need?

- J.A.F. suite
- The firmware itself for your Nokia phone(can be found on our website in the section).
- Data cable to your phone.
- Charger.
- The desire to flash.
- All Nokia-related programs (Nokia Ovi suite, Nokia PC suite, Nokia Software Update, various utilities, etc.) must be removed from the computer. Otherwise, problems that we don’t need may arise.
For registry cleaning recommended program Vit Registry Fix(office site).

• About installing the program JAF. 2.0 You can find out on our.
• Before flashing the firmware and running the "JAF" program, it is strongly recommended to disable antivirus programs, which may interfere with the stability of the program.
• After installing "JAF", install the unified driver.

2. Connect the phone that is turned on. Install the drivers (happens automatically upon connection).

These kinds of windows will appear in the lower right corner of your monitor (during driver installation).

3. Press the button INF and read information from the phone.

4. Download the firmware files of the required version for your RM-XXX.

5. Make a backup of the PM by selecting the checkbox in the field Read PM and pressing the button SERVICE.

Enter the starting address - 0

And the final one is 500, click OK.

We are waiting for the process to finish.

If several lines appear when you press the INF button and the PM is not readable, skip the reading PM item and proceed to flashing the firmware.

Firmware

Press the button USE INI, if you have installed full firmware package And latest version INI file.

If versions necessary files or the product code does not match, select the files manually. Check the box Manual Flash And Factory Set.

Selecting firmware files. The MCU main firmware file must be renamed to the extension .C0R so that the program can see it.

Then select the PPM and CNT files (for smartphones there may not be a CNT file).

After the files are selected, click FLASH and once again check the correctness of the selected files.

If everything is correct, click OK.

The firmware process begins, if everything is fine, the phone will turn off and the search for new drivers for the firmware will begin, since WINDOWS is clean, everything goes on the fly. If any error appears, read the full