How to remove square brackets in Word. Square and curly brackets in Word. Using special characters
Text editor Microsoft Word provides its users with virtually unlimited functionality, so necessary for working with office documents. Those who have to use this program quite often will gradually learn key features its work and learn about the abundance of useful functions. But inexperienced users often have questions about how to perform this or that operation, for example, how to put square brackets. In this article we will talk about exactly this.
Unlike more rare symbols, square brackets are on the keyboard of any computer and laptop, you just need to know in which language layout and how to enter them. But this is just one of several ways to write the characters that interest us today in the MS Word editor, and then we will look at all of them in more detail.
Method 1: Keyboard Keys
Square brackets, both opening and closing, are located on keyboard buttons with Russian letters "X" And "Kommersant" respectively, but they must be entered in the “Latin” layout, which includes English and German. You can switch from Russian to a language suitable for solving our problem using the keys "Ctrl+Shift" or "Alt+Shift"(depending on the settings installed in the system), after which all you have to do is place the cursor pointer (carriage) in the place where the characters will be entered, and simply press the buttons with them on the keyboard. So, alternately pressing "X" And "Kommersant", you will get a record like .
If you put two square brackets at once, enter the desired text (or values) in them. You can also enter the opening symbol first, then add an entry, and then the closing one.
Method 2: Inserting symbols
Microsoft Word has a large set of built-in symbols, among which you can easily find square brackets.
Method 3: Hexadecimal codes
Each symbol located in the integrated library of the Microsoft office application has a code designation. It is quite logical that both square brackets (each separately) have one. To directly convert the code into them, you also need to use a special key combination. If you do not want to make unnecessary movements and mouse clicks, refer to the section "Symbols", you can put square brackets as follows:
Conclusion
That's all, now you know how to put square brackets in text document Microsoft Word. Which of the described methods to choose is up to you. The first is the simplest and fastest, the next two allow you to familiarize yourself with the additional capabilities of the program and how to add any other symbols to it.
While working in Word, the user often resorts to various tricks and shortcuts to solve an existing problem. In a text editor, symbols can be inserted in several variations. In our case, you can also put brackets in Word in several ways. After all, you often have to enclose fragments of text either in square brackets or in curly brackets. Therefore, we will analyze all the options one by one.
Square brackets
To insert a square bracket, the following methods and actions will help:
Method 1: using Russian letters
Initially, you need to place the mouse pointer at the place where the bracket should open. Next, check the keyboard layout (must be an English layout - you can enable it using the Shift + Alt key combination). Click on the Russian letter “x” - an opening bracket “[” will appear, and to close, click on the letter “b” - the bracket will be a closed bracket “]”.
Method 2: Symbols
Using the famous Symbols function, you can insert square brackets. Here's what you need for this:
Method 3: Using Sign Code
If you open “Insert” - “Symbol” - “Other symbols” and in the window that opens, click on the bracket, you will see the symbol code. The picture below shows everything.
You can use the code like this:
Braces
This type of brackets can be placed in the following three ways:
Method 1: Keyboard shortcut
- First, change the letter input method to “English”;
- Hold down the “Shift” button and press the Russian letters “x” and “ъ” alternately.
- (It should work out like this).
Method 2: Symbol Function
You should open the familiar section “Symbol” - “Other symbols”.
In the pop-up window in the “Set” indicate “Basic Latin”. Next, select the curly brace and click Insert.
Method 3: Curly brace code
To open we write:
Attention! Use the English keyboard layout to write the character code.
007B, then you need to press the button combination “Alt+X”;
To close:
Type 007D and press “Alt+X”.
Almost everyone knows how to put square brackets on the keyboard in Word. But there are many other ways. Just about them we'll talk in this article. We will analyze the most sophisticated ones. Let's talk about the ALT code, the hexadecimal code and the symbol table. Read the article to the end to find out how to put square brackets in Word in three ways.
Using a symbol table
The most common method is the one that uses the built-in symbol table of the Word program. Now, with its help, we will figure out how to put square brackets in Word in 2007. Please note that all actions will be carried out in this particular version, but this does not mean that the method will not be suitable for others.
So, first you need to open the table itself with all the symbols. To do this, go to the "Insert" tab and on the right side of the toolbar, pay attention to the "Symbol" button. If you click on it, a submenu will appear, in it you need to select "Other symbols..." - a table will appear.
As you can see, there is an unimaginable number of symbols, and among all of them there are the square brackets we need. Of course, searching for them manually takes a long time, so it’s easier to use the search. We will search by sign code. The code for the opening bracket is 005B, and the closing bracket is 005D. Enter one of the codes in the input field of the same name.
As a result, you will need to click the "Insert" button for the symbol to be printed in the document. This was the first way to put square brackets in Word, but not the last. Now let's move on to the next one.
We use hexadecimal code
Hexadecimal code will allow you to deliver much faster desired symbol, unlike the previous method. But its use may seem more complicated to some, but the main thing is to understand everything. Now we’ll figure out how to put square brackets in Word using hexadecimal code.
In fact, we already talked about it in the article when we searched for the desired sign in the symbol table. Then it was necessary to write the sign code - 005B or 005B. These are the hexadecimal codes for the opening and closing square brackets. Now we need to explain how to enter them into the document itself.
So, first decide where you will open the bracket. Place the cursor in that place and enter the appropriate code. After this, all you have to do is press the desired key combination - ALT+X. To put a closing parenthesis, you need to do the same manipulations, just specify a different code.
Using ALT code
Now the most universal method will be discussed; it allows you to place square brackets not only in the Word program, but also outside it, unlike previous methods. Now let's talk about how to put square brackets in Word 2010. However this version will be given as an example, and all the manipulations performed will be suitable for absolutely everyone.
First, let’s clarify the codes of these two symbols themselves:
- for the opening one - 91;
- for the closing one - 93.
Knowing the code, you can safely start entering it. First, place the cursor in the desired location, then, holding down the ALT key, start entering the code. After you release ALT, the desired symbol will appear.
Almost everyone who uses a computer has repeatedly encountered working in Microsoft Word. And despite the fact that the experience of using this program can be very extensive, sometimes there are situations when it is impossible to simply find out how to solve a particular problem on the fly. Accent, degree, and even square brackets very often become such a problem. And then questions arise: how to put emphasis in Word or how to put degree in Word. In this article we will tell you how to do this.
How to put emphasis in Word
Method 1— Using a special insert.
Place your cursor immediately after the letter you want to emphasize. At the top of the screen, open the “Insert” tab and click on the symbols menu (if your screen has a small resolution, an additional Equation/Symbols menu will open). At the bottom of the window, click on the “Other symbols” link.
Adding emphasis through Special symbols
In the symbol window that opens, select a set called “united diacr. signs." Find the corresponding symbol, select it and click on the “Insert” button. The letter that was located to the left of the cursor will receive an accent mark on top. The accent can be either left or right. Pay attention to the character code that corresponds to the selected character. Any character has this code and can be used to quickly add it to text.
This is what the added accent with a right slant on the letter “e” should look like.
Method 2— Replacement of a character code with a character using the keyboard shortcut Alt+X.
In the previous method, I drew your attention to the hexadecimal code of the character being added. And if you look at the image above, you will see that the code “0300” corresponds to the accent mark with a left slant, and the code “0301” with a right slant. These codes can be used to add characters. To do this, enter the appropriate character code to the right of the character you want to emphasize. Without moving the cursor to another location, press the key combination Alt+X. Once pressed, the code should be converted to the character it corresponds to. In my example, I added the code 0300 and, after pressing the Word keyboard shortcut, converted it into a left-inflected accent mark and 0301 into a right-inflected accent mark. The result is visible on the line below.
Method 3— Using the code entered on additional keyboard.
And finally the most quick way adding emphasis on a letter. Place the cursor after the letter and, with the Alt key pressed, enter the numeric code on the additional numeric keypad. An accent with a left slant corresponds to the code “0768”, and with a right slant the code “0769”. When entering a code on the keyboard, the Alt key is not released.
How to put a degree in Word
Unlike accent, degree is used much more often and especially in technical documents. And the developers naturally took into account the need for frequent use and made a special button to convert a character or group of characters to upper or lower case. Upper case and used as a degree in Word.
For example, to create a degree of square meters, select the number “2” and find the symbol “X” with a two above it on the “Home” tab. This button converts the number 2 to the power of two. You can see the result of the conversion in the image below.
There is another way to put the degree (albeit less used). Through the font settings window. To convert, select the symbol and click on the small square with the arrow in the “Fonts” section on the main tab. Instead of clicking on the square, you can use the keyboard shortcut Ctrl+D. In the “Modification” section, check the box next to “superscript”.
How to put square brackets in Word
Square brackets are hard to miss on your keyboard, but if you suddenly couldn’t find them, here they are:
They are entered in the English keyboard layout. If the Russian layout is enabled, you will not be able to put square brackets.
You can go a very complex way and insert them through inserting special characters in the same way as when adding an accent. Open the Symbols menu in the Insert tab and select More Symbols. Find the square brackets in the table and click insert.
You can also use the character code to add it to the text. Enter the code 005B for the opening bracket and 005B for the closing bracket and immediately after entering the symbol, press the Alt+X key combination. You should get a result similar to the image below.
And of course, square brackets can be added by entering their code on the additional numeric keypad. Hold down the Alt key and, without releasing it, type code 91 on the additional keyboard on the right to open brackets and code 93 to close.
Do you know how to put square brackets in Word? If yes, then you still won’t name four ways to do it, but they exist. These are the ones we will talk about in this article. We will look at the most trivial methods, and the most sophisticated - those that few people will use, but they still exist. As they say, just in case.
We use a standard keyboard
The way that everyone knows is to use the corresponding keys on the keyboard. It might not be included in the article, but for users who are just starting to master the computer, it is necessary to know it. Therefore, we will now tell you how to put square brackets in Word using the keyboard.
By looking at it, you can find the icon of square brackets on the Russian keys "X" and "Ъ". Of course, pressing these keys while the Russian language is selected in the system will not achieve anything - the corresponding letters will be printed. The trick is different. You should change the system language. For those who don’t know, this is done by pressing ALT + SHIFT or CTRL + SHIFT (depending on the system itself). If this option seems complicated to you, then you can change the language by clicking on the corresponding button on the taskbar. You can see its location in the picture.
After the system has been installed English language, you can safely press these buttons. So you have learned how to put square brackets in Word using a regular keyboard. Well, now let's move on.
Using special characters
Now let's figure out how to put square brackets in Word 2007 using special characters. Of course, this method may work on other versions of the program, but the example will be given on the specified one.
Initially, you should open the corresponding window in Word. To do this, initially go to the "Insert" tab. In it you need to find the "Symbol" button. It is located on the right side of the ribbon. By clicking on it, you will open a menu in which you need to select “Symbol”.
So, the required window is open. You need the place in the drop-down list called “Set”, select “Basic Latin”. After this, symbols from this category will appear in the main field of the window. Scroll down the table, find the ones you need and highlight them. After that, click the "Insert" button and they will be printed in the document.
Now you know the second way to put square brackets. In Word 2010, by the way, this method works on a similar principle.
We use hexadecimal code
Now we will tell you how to put square brackets in Word using hexadecimal code. This method, rather, belongs to the category of sophisticated. Now you will understand why.
Here is the hexadecimal code for the character "[" - 005B, but for the character "]" - 005D. As you can see, remembering them is quite easy. Now we'll tell you how to use them.
In order to insert square brackets into text using this method, you need to enter this code into the text itself, and then press the ALT + X key combination. You can try this right now, after this operation your code will turn into the character you need.
We use formulas
By the way, when you opened the table of special symbols, in the drop-down menu, next to the “Symbol” button, there was a second icon - “Formulas”. Now we will just talk about how to insert square brackets using formula input.
This method is unlikely to be used for normal typing in a document, but if you want to enter a formula into it, then it will come in handy.
So, as soon as you click this button, a form for entering an equation will be inserted into the text, and the equation designer will open in the toolbar. In the designer, find the "Bracket" button and click it. In the menu that appears, you need to click on the square brackets, between which there is a translucent square. After clicking, this form will appear in the document. Click on that square and enter text - it will be inserted between the brackets
Using Alt code
The article provided ways to latest versions"Word", now it's time to talk about how to put square brackets in "Word" 2003. Although this method works anywhere and even outside the named program.
The method is very simple: you just need to remember the sequence. For the "[" bracket, it will look like a combination of three keys: ALT, 9 and 1, and for the "]" bracket - ALT, 9, 3. By pressing them, you will get the desired result.
