Beeline TV set-top box unlocking for another operator. MTS digital TV management. The set-top box does not respond to the remote control

In the process of using technology, you often have to find the answer to the question of how to unlock the TV remote control. This often occurs after being exposed to pets or small children. The fault may also be an accident when certain buttons are pressed arbitrarily. In any case, the problem requires a solution, and below we will offer options for solving the situation when the remote control is blocked.

If the TV does not respond to remote control commands, then the first thing to do is check its batteries. Maybe they are simply discharged or faulty. It's very easy to do this:

• open the battery compartment;
• remove the installed batteries;
• insert similar new batteries.
• check the functionality of the remote control.

On a note! It is worth inspecting the battery compartment to ensure that the contact pads are in good condition. Perhaps they were bent, or traces of oxides formed on them. All this can also lead to the remote control not working.

If nothing has changed after these events, it’s time to think about how to unlock the TV remote control. There are a huge number of ways to unlock the remote control. But not each of them will be effective for a particular model. Most best option– view the instructions for the TV. Usually answers to all common questions are written there. But the book is not always saved after purchasing equipment. For this reason, you have to look for the answer yourself.

The instructions usually state special code . It will be enough to press this combination on the remote control buttons, and the problem will be solved. If no papers have been preserved, the first thing to think about is how the blocking occurred. By trying to do the opposite, you can make the remote control effective in relation to the TV.

Alternative methods

There are a large number of options for unlocking the remote control that Internet users offer:

1. Press the “P” and “+” buttons simultaneously. After this, a combination of identical numbers is dialed, for example 2222 or 5555. Common and standard codes include 1234 or 1111. After dialing the combination, press “+” again. Perhaps it will be a completely different combination of numbers. There are numerous options to try.
2. After the initial numbers from the first method are pressed, the LED should remain lit without interruption. In this case, instead of a combination, you can try simultaneously pressing: “Menu” and “+Channel”, “Menu” and “+Volume”.
3. Sometimes it is enough to hold down one button for about 5-10 seconds. But this method is suitable for a few TV models.

Remember the combinations of numbers that you press! After all, rash actions can only aggravate the situation.

Some remote control models can be unlocked by simultaneously pressing the “Exit” button and the numbers 9 and 1. The option of removing the batteries is also suitable, and while inserting them, the power button must be held. It is these methods that help return the remote control to full operation.

What is hotel mode

In some models of television receivers there is an option called “HOTEL MODE”, which translates as “hotel mode”. If it is turned on, the equipment will not respond to many remote control commands, for example, increasing the volume or searching for new TV channels. This is done to limit possible actions guests in hotels. Thanks to its use, loud sound from the TV will not disturb other residents. However, in a personal apartment or house, turning on the “hotel” mode will only interfere.

To disable the option, you can use the following recommendation. In Stand-By mode, press the Display/Menu/Power buttons on the remote control in turn. Another version of the sequence looks like this: Display/Menu/Mute/Power On, and in the menu that appears, select reset and press the MENU button. After that the device needs to be rebooted(turn off and on).

How to remove parental controls

Another option that is often implemented in modern TVs – parental control. It is designed to limit the actions of children: for example, watching prohibited TV channels, changing system settings. To perform such actions, the TV will ask set PIN code.

But sometimes this control plays a cruel joke on the parents themselves: by turning it on and forgetting the code, you yourself can face inconvenient restrictions. Resetting the TV settings, namely the password, will help remove them. Here is the algorithm for LG smart TVs:

• go to Menu/Settings;
• go to the Security/PIN code reset tab;
• enter any combination of numbers without pressing OK;
• press the channel switching buttons: up twice, then down and up again;
• enter code 0313 and click OK.

The result of these measures should be to reset the PIN code to the factory one, that is, four zeros.

The MTS remote control is a small mechanism with buttons that allows you to install and then manage MTS digital television channels. Control occurs by transmitting commands through infrared radiation. They are sent to the decoder, where this signal is converted to digital for transmission to the TV. It is battery operated.

New TV features

The remote control for the MTS set-top box allows you to select digital TV settings and use all its capabilities:

• retune selected programs to the desired channels;
• allows the “repeat” function to watch a missed program, and the “TV pause” function to pause the show for an hour.
• Using the remote control, you can activate a reminder about the desired program or enter additional alerts, such as:
• "MTS Weather";
• "MTS Route";
• "MTS Exchange Rates";
• "Yandex traffic jams";
• "Video on demand".
• With one touch of the remote control button, you can remotely request a new show or movie of interest, select any movie from the Omlet ru catalog.

Setting up the TV

Now let's talk about how to configure the device to work:

1. Download instructions on where to choose the right manufacturer.
2. Dial the three-digit code;
3. Press 2 buttons simultaneously (TV and OK) and hold for 2 seconds. The “TV” key will light up;
4. Dial the next three-digit code. The button light will go out;
5. Try the volume. If there are changes, then save the code and continue checking;
6. If there is no reaction, then repeat steps 3-6, trying the following codes.

How to replace the original

Sometimes the set includes Universal remote remote control MTS, which makes it possible to manage several devices:

• receiver;
• TV;

Setting up the remote control required device occurs with the TV and DVD keys. If you need to return to working with the set-top box, you should press the “STV” button on the remote control. The LED blinking will indicate the transition to control of the set-top box.

It is not possible to buy the MTS remote control separately, since it is included with the set-top box in one set.
But there are already absolute analogues on sale, which are fully adapted for the MTS decoder.

If you have problems with the settings

When suddenly the television settings are accidentally lost, it is necessary to carry out a number of operations:

1. Select the “Menu” key on the remote control;
2. Use the down arrow to select the “Custom Settings” section;
3. Use the right arrow to find the “Factory settings” section;
4. press the “OK” key.;
5. the interface will show the PIN code request command. Enter 0000 using the remote control buttons;
6. you will be asked to confirm the operation - again you need the “OK” key.

The result of such actions will be automatic installation TV channel set-top box.

The set-top box does not respond to the remote control

If suddenly the mts remote control does not work, first you should check whether the remote control is configured for the decoder. If not, then the “STV” button will solve the problem. If there are still no signals, you need to restart the decoder and check the batteries. As a last resort, you can contact the service center.

Age restrictions

Initially, the interface is configured to be shown “for everyone,” which means there will be age restrictions.

When the question arises about how to unlock the remote control in order to remove them, you should:

1. Select the channel on which the restriction is set;
2. Press the red button on the remote control;
3. Use the down key to select required level access (it must be greater than or equal to the number of red dots on the screen);
4. Dial the PIN code and the “OK” key.

Video: setting up television