Installation via the “Install personal certificate” menu. How to install CryptoPro - how to install a personal certificate in CryptoPro from a flash drive? Crypto installation

To protect transmitted data, the Information Portal croinform .ru uses a cryptographic information protection tool (CIPF) from the Crypto-Pro company. To install this software, follow a few simple steps.

Step 1. Download the CryptoPro CSP distribution kit (version 4.0)

To download the distribution, go to the CRYPTO-PRO website http://www.cryptopro.ru/

In the “Login” form, enter the following username information: MBKI , password: MBKI and click Login

The Download Center page opens. In the list of programs, select CryptoPro CSP(First on the list).

Select CryptoPro CSP distribution (version 4.0) which suits your operating system. Save the file to disk.

Step 2. Installation of CryptoPro CSP (version 4.0)

Launch the distribution package of the CryptoPro CSP program downloaded in step 1. The “Installation Window” will appear on the screen. Select the recommended installation option, "Install (Recommended)."

A window will appear displaying the installation process of CryptoPro CSP.

After completing the installation process of CryptoPro CSP, you will receive a message.

A temporary license is valid for 30 days. After this period, the full package of CIPF functions stops working, but some of the information protection functions necessary to work with the Information Portal remain.

CryptoPRO is one of the cryptographic utilities (cryptoprovider). Which is necessary for generating an electronic digital signature () and working with key certificates. In this article we will analyze in detail the process of installing the CryptoPRO program on a computer.

After you have purchased a CryptoPro CSP license or decided to try out free three-month access to the program’s functions, the question arises: how to use it on a computer?

How to install Crypto-PRO

The answer, as always, is in the user manual, which is available on the program’s official website and is also included when purchasing a license. But since it so happens that no one reads it anyway, we’ll describe the installation process point by point.

First step: PC check

At this stage, you need to make sure that your computer does not have old version this program. You can do this by carefully looking through all the Start menu items on your computer; if you do not find the CryptoPRO item in it, then most likely this software was not installed on your computer.

If you find CryptoPRO in the list of programs, make sure that its version is outdated, for this:

1. Launch CryptoPRO PKI
2. Open the License Management tab – CryptoPRO CSP
3. Look at the version number in the right window

If the program version is 3.6.**** and higher, then reinstallation is not necessary and you can proceed to the fourth step. If the specified version is lower than 3.6.****, uninstall the program using standard Windows tools and restart your computer. Then proceed to the next step.

Second step: download the distribution

Fill in the required fields, agree to the license agreement and go to the next page (at the time of writing the instructions it looked like this):

Third step: installing CryptoPRO CSP on your computer

Run the downloaded file and follow the installer steps until you see the following window:

Enter the required information and the Serial Number you received when purchasing the license. If you want to get free trial access, leave this field blank and click Further.

After installation is complete, restart your computer. Ready!

Fourth step: enter the license key (optional)

If the program is already installed on your computer and you only need to enter license key, follow the next path.

Installation via the “View certificates in container” menu

1. Select “Start” > “Control Panel” > “CryptoPro CSP”, go to the “Tools” tab and click on the “View certificates in the container” button.

2. In the window that opens, click the “Browse” button to select a container to view. After selecting the container, click on the “Ok” button.

3. In the window that opens, click the “Next” button.

4. In the next window, click on the button« Install”, then respond affirmatively to the certificate replacement notification (if it appears). The certificate is installed.

5. If the “Install” button is missing, then in the “Certificate for viewing” window, click on the “Properties” button.

6. In the window that opens, select Install Certificate.

7. In the Certificate Import Wizard window, select Next . In the next window, leave the radio button on Automatically select a store based on certificate type and click Next. The certificate will be installed in the Personal storage.

8. In the next window, select Next, then click on the Finish button and wait for the successful installation message.

Installation via the “Install personal certificate” menu

To install, you will need a certificate file (a file with the .cer extension). The certificate file can be exported from the Personal storage. If the required certificate is not in the repository, please contact technical support by the address [email protected], indicating the tax identification number and checkpoint of the organization and the essence of the problem.

1. Select Start > Control Panel > CryptoPro CSP. In the CryptoPro CSP Properties window, go to the “Service” tab and click on the “Install personal certificate” button.

2. In the Certificate Import Wizard window, click on the Next button. In the next window, click on the Browse button and select the certificate file.

4. In the next window, click on the “Next” button.

5. Click the Browse button .

6. Specify the private key container corresponding to the certificate and click OK.

7. After selecting the container, click on the Next button .

8. In the “Select a certificate store” window, click on the “Browse” button.

If the version of CryptoPro CSP 3.6 R2 (product version 3.6.6497) or higher is installed, then check the “Install certificate into container” checkbox.

9. Select Personal storage and click OK.

10. After selecting the storage, click on the Next button, then Finish. After clicking the Finish button, you may be asked to replace the existing certificate with a new one. At the prompt, select Yes.

Wait for a message about successful installation. The certificate is installed.

During reinstallation, you will need to enter a license for Crypto Pro, so you should find the license form in advance

You should install exactly the version of Crypto Pro for which the license was obtained.

Installation will require administrator rights on the system Microsoft Windows. During installation, you must disable your antivirus program.

• Automatic update of CryptoPro

If CryptoPro versions 2.0, 3.0 or 3.6.5365 and higher are installed at your workplace, then you can update CryptoPro using a web disk or diagnostics. In this case, deletion previous version not required. In other cases, reinstallation of CryptoPro should be done manually.

When installing the system using WebDisk or Diagnostics, the default version is installed CryptoPro 3.6 R4 developer company.

To check the installed version of CryptoPro, go to Start/Control Panel, open CryptoPro CSP. On the tab Are common will be indicated full version product.

Rice. 1. CryptoPro version

• Updating CryptoPro manually

1. Remove CryptoPro.

To clear all traces of previously installed program CryptoPro needs to use the utility cspclean. To do this, download the utility from the Software section and run the cspclean.exe file.

When using the cspclean utility downloaded from the Kontur-Extern website, removing containers from the registrynot happening. If cspclean was independently saved from the Crypto-Pro website, then when you launch the utility, you may receive a request to delete containers from the registry, which must be rejected.

2. To restart a computer.

3. Install CryptoPro using web disk.

When installing the system using the webdisk, it is installed by default CryptoPro 3.6 R4. CryptoPro versions 2.0 and 3.0 are no longer FSB certified and cannot be installed from a web drive. If necessary, distribution kits of any versions of CryptoPro can be downloaded from the website of the developer company.

4. Enter serial number license indicated on the form, which is issued at the service center along with the subscription service agreement.

5. After installation, be sure to restart your computer. Reinstallation is complete.

After reinstalling the CryptoPro CSP program, you should reinstall all existing certificates (see.

CryptoPRO is a crypto provider that allows you to generate digital signature and allowing you to work with key certificates. The installation process of CryptoPRO on Personal Computer and this article is devoted to. Let's take a closer look at how to install CryptoPro CSP for free.

A description of this process is contained in the user manual on the official website, and is also included when purchasing a license. Let's look at the procedure step by step.

Before starting work, the user needs to make sure that an outdated version of the product is not installed on his PC. The check is carried out in the menu if the CryptoPRO item is missing, therefore CryptoPro plugin is not installed in the browser.

If an item of interest is found in the menu, you need to check whether the version is outdated. To do this, launch CryptoPRO, in the License Management tab in the right window, look at the version number and license validity period.

Download CryptoPRO CSP

After it turns out that CryptoPro EDS browser plug in is not installed, let's start downloading CryptoPRO CSP and installing it on your PC.

Since the provider is a means of cryptographic information protection, its distribution is accordingly recorded by certain supervisory authorities. In order to download the program you will need to register. Next, refer to the link sent to your email. After clicking on it, select CryptoPRO CSP from the list of products.

Installation CryptoPRO on the computer R

The installation file is downloaded before how to install CryptoPRO on your computer. To install, run the file. If the security system issues a warning, then you need to allow the program to make changes to your PC. Next, click “Install” and wait a few minutes. User participation is not required at this stage. After installation, it is recommended to restart your computer.

CryptoPRO license key

Now enter the license key.

• In the programs we look for CryptoPRO, select CryptoPRO CSP
• Enter the serial number.

Check that installed version matches the one you purchased. If you have version 4.0, then, accordingly, select CryptoPRO CSP 4.0. This version is recommended for Windows 10.

CryptoPRO Certificate

Since all electronic document flow will be recorded with an electronic digital signature, you need to know , how to install a certificate in the Crypto PRO registry.

1. Through the start we go to the control panel.
2. Select CryptoPRO and go to “Service”.
3. Next, click “View certificates in the container.”
4. We look for our certificate, select it, and the download starts automatically.
5. In the storage selection window, click browse and select “Personal”. Click next and OK.
6. Wait for notification that the certificate has been installed successfully.