Instructions for using a universal remote control for a TV. How to set up a universal remote control for your TV? Instructions. Are they really universal?

With active use by the entire large family from morning to evening, the remote control remote control A TV usually lasts 5-7 years, after which it breaks due to pressing the button too hard or it simply fails. Universal remote UNI RTV-02, aka R-TV2- This is an excellent replacement for the standard remote control. It supports more than 800 codes for TVs of various brands, including not only old models, but also modern LCD and plasma ones. Large buttons make the R-TV2 remote control an excellent choice for pensioners and people with low vision. At a price of 150-200 rubles, you are unlikely to find anything better.

Setting up the RTV-02(R-TV2) remote control for your TV

The control panel is configured once and does not require performing the operation again after removing the batteries.

Auto-tuning of the remote control by model

In this case, the search is carried out only among models of those manufacturers that are signed under buttons 1-8. If your TV is of a different brand, select the code manually.

1. Click the button SET and, without lowering it, press and hold the button with the name of your TV manufacturer for 5 seconds. After this, the indicator will start flashing.

2. As soon as the volume signal appears VOL on TV - lower both buttons

3. Check the basic functions of the remote control. If they work, the installation is complete. If they don’t work, repeat step 1 or use the second search and installation method.

Automatic code search RTV-02 and R-TV2

1. Press and hold the button SET about 5 seconds. As soon as the indicator lights up, automatic code scanning will begin.

2. As soon as the volume change icon appears on the TV screen VOL- immediately release the button SET. Check other functions of the remote control. If everything works, great. If not, repeat setting up the universal remote control again.

Manual search for remote control code

In addition to automatic code search on the RTV-02 and R-TV2, there is also a manual one. To use it, do the following:

SET And POWER

2. Release the keys. Then press the volume up button VOL+ until the volume control works.

3. As soon as the TV starts responding to the Uni universal remote control, click on SET to save the settings and exit programming mode.

Manually entering the remote control code

1. Press the buttons simultaneously SET And POWER. Keep them pressed until the indicator lights up.

2. Enter your three digit manufacturer code (see table below). After you enter the third digit, the indicator on the remote control goes out - the setup of RTV-02 and R-TV2 is completed.

3. Check the operation of the remote control.

List of RTV-02 and R-TV2 setup codes

AIWA
814, 827, 884
AKAI
886, 157, 885, 809, 176, 053, 782, 787, 795, 840, 845, 849, 850, 854, 863, 865, 887, 888, 889, 059, 006, 890, 891, 073, 883
AKIRA
886, 786, 746, 447, 704, 053, 384, 537, 539, 519, 440, 807, 892, 893, 894, 044
AVEST
176, 807
BBK
134
BEKO
895, 896, 897, 040, 374
BENQ
841, 846
CHANGHONG
028, 130, 131, 136, 139, 141, 146, 151, 156, 161, 166, 171, 176, 181, 186, 196, 201, 285, 315, 323, 331, 340, 341, 346, 351, 361, 365, 366, 371, 376, 381, 386, 390, 396, 401, 406, 411, 415, 416, 421, 431, 432, 436, 440, 441, 446, 451, 456, 457, 461, 466, 474, 476, 481, 482, 486, 491, 498, 502, 658, 663, 668, 679, 683, 688, 729, 745, 781, 786, 791, 852, 858
CONROWA
063, 068, 178, 353, 468, 473, 514, 537, 542, 547, 552, 562, 740
CYBEX
752
DAEWOO
808, 813, 819
DRE
855, 927, 924
ELENBERG
248, 258, 265, 807
ERISSON
898, 746, 807, 764, 157, 440, 148, 814, 033
FUNAI
412, 899, 900, 248, 807
GENERAL
924, 927, 855
GOLDSTAR
776, 530, 797, 798, 803, 818, 830, 861, 862, 901
GRUNDIG
843, 777, 778, 783, 788, 793, Video (874)
HAIER
524, 001, 033, 059, 158, 190, 195, 205, 214, 219, 529, 534, 682, 684, 687, 694, 715, 720, 739, 756, 761, 774, 807, 812, 825, 832
HI-VISION
152
HORIZONT
530, 901, 903, 775, 789, 794, 796, 799, 801, 823, 837, 857, 859
HISENSE
133, 003, 016, 022, 024, 034, 035, 043, 044, 132, 163, 168, 173, 185, 204, 209, 229, 276, 281, 291, 296, 301, 338, 343, 348, 448, 453, 458, 463, 511, 516, 519, 535, 538, 548, 553, 558, 559, 563, 564, 567, 568, 569, 572, 573, 574, 578, 579, 582, 583, 584, 587, 589, 592, 602, 607, 612, 622, 627, 632, 642, 647, 672, 677, 699, 700, 704, 705, 706, 710, 711, 716, 766, 779, 856
HITACHI
076, 496, 501, 506, 526, 531, 536, 541, 019, 037, 103, 108, 113, 116, 149, 545, 546, 551, 556, 561, 566, 571, 749, 811, 816, 821, 826, 511, 516, 521
HYUNDAI
746, 133, 447
JAV
066
JINXING (SVA)
010, 020, 153, 164, 169, 213, 218, 223, 228, 316, 373, 429, 492, 493, 497, 507, 521, 580, 590, 635, 640, 645, 650, 655, 660, 676, 737, 744
JVC
757, 762, 767, 772, 802
KONKA
879, 033, 006, 012, 014, 038, 062, 072, 074, 077, 115, 120, 124, 125, 144, 248, 253, 258, 263, 268, 273, 278, 283, 288, 293, 298, 303, 308, 313, 318, 352, 362, 367, 372, 377, 387, 392, 394, 399, 404, 409, 424, 479, 484, 489, 494, 499, 504, 605, 610, 641, 646, 651, 656, 686, 701, 707, 721, 726, 731, 800, 805, 810, 878
LG
776, 601, 530, 056, 096, 447, 520, 525, 576, 586, 591, 596, 771
LOEWE
922
MITSUBISHI
760, 829, 831, 834, 835, 860
NEC
876
ORION
904, 905, 923, 807
PANORAMA
045
PANASONIC
822, 906, 864, 869, 053, 078, 114, 133, 243, 319, 324, 329, 334, 339, 344, 349, 354, 359, 364, 434, 439, 444, 550, 696, 817
PANDA
002, 042, 047, 052, 107, 140, 152, 154, 159, 233, 238, 321, 378, 383, 414, 452, 462, 467, 472, 477, 487, 509, 555, 565, 570, 630, 708
PEONY
017, 082, 135, 189, 310, 488, 512, 517, 522, 665, 666, 671, 691, 742
PHILIPS
759, 764, 064, 901, 015, 040, 069, 070, 075, 080, 085, 090, 095, 100, 105, 110, 230, 240, 245, 754
POLAR
020, 447
PRIMA
013, 018, 023, 027, 049, 067, 089, 112, 117, 122, 134, 145, 157, 192, 200, 211, 235, 237, 250, 260, 272, 307, 328, 332, 357, 374, 382, 407, 449, 454, 459, 464, 469, 661, 693, 698, 703, 722
PROWEST
926
QINGHUAT OUGFANG
046, 051, 118, 593, 719, 734, 743
RECORD
133, 907, 908, 909, 910
ROLSEN
176, 432, 157, 883, 775, 789, 794, 796, 799, 801, 823, 837, 857, 859, 911, 912
ROWA
092, 102, 183, 188, 193, 199, 358, 455, 527, 581, 690, 695
RUBIN
897, 902, 779, 040
SAMSUNG
685, 877, 755, 137, 925, 902, 385, 007, 009, 142, 147, 194, 306, 360, 363, 368, 385, 419, 478, 483, 609, 614, 619, 624, 629, 634, 670, 675, 680, 681
SANAM
872, 883
SANYO
123, 533, 815, 143, 148, 206, 333, 503, 508, 513, 518, 523, 528, 533, 713, 735, 815, 820, 011, 058, 101
SANSUI
748
SHARP
773, 768, 763, 423, 917, 104, 126, 388, 393, 398, 403, 408, 413, 418, 758
SHIVAKI
759, 893, 447, 482
SITRONIKC
053
SKYWORTH
000, 005, 026, 031, 036, 045, 050, 054, 055, 060, 065, 079, 086, 091, 111, 121, 129, 138, 150, 155, 160, 162, 165, 167, 170, 172, 175, 177, 180, 182, 187, 197, 202, 207, 212, 217, 222, 225, 227, 232, 242, 247, 252, 257, 262, 267, 277, 282, 287, 292, 297, 302, 312, 317, 322, 326, 327, 337, 342, 347, 369, 379, 384, 389, 470, 490, 515, 532, 539, 540, 544, 549, 557, 560, 575, 577, 585, 588, 595, 597, 600, 603, 608, 613, 617, 618, 623, 628, 633, 637, 638, 643, 648, 652, 653, 657, 662, 664, 667, 669, 673, 674, 678, 702, 709, 712, 717, 725, 727, 730, 746, 751, 765, 769, 770, 780, 785, 790, 839, 844
SNOWA
875, 880, 882
SOKOL
804, 809
SONY
913, 836, 088, 093, 098, 106, 109, 234, 239, 244, 249, 254, 259, 264, 269, 274, 279, 284, 289, 294, 299, 304, 309, 314, 428
STRONG
833, 842, 847, 851, 866, 868
SUPRA
746, 794, 133
SVA
025, 041, 198, 203, 208, 554, 738
TCL
447, 021, 039, 048, 061, 087, 094, 099, 255, 265, 270, 275, 280, 290, 295, 300, 305, 320, 325, 330, 335, 345, 350, 355, 370, 375, 380, 395, 397, 400, 402, 405, 410, 412, 417, 420, 422, 425, 427, 430, 433, 435, 437, 438, 442, 443, 445, 450, 460, 465, 475, 480, 485, 495, 500, 505, 510, 606, 611, 615, 616, 620, 621, 625, 626, 631, 636, 639, 644, 649, 654, 659, 718, 723, 724, 728, 733, 753, 784, 848
THOMSON
853, 914, 915, 916, 792, 824, 828, 838, 867
TOSHIBA
081, 191, 806, 216, 221, 226, 231, 236, 241, 246, 251, 256, 261, 266, 286, 311, 336, 356, 391, 426, 471
VESTEL
919, 918, 920, 015
VITYAS
921, 530, 015
XIHU
008, 029, 030, 071, 084, 174, 179, 184, 741
X. VISION
873
OTHERS
004, 032, 057, 073, 083, 097, 119, 127, 128, 210, 215, 220, 224, 271, 543, 594, 598, 599, 604, 689, 692, 697, 714, 732, 736, 747, 750, 882

A universal TV remote control may be needed for various reasons.

For example, to control multiple screens or due to a breakdown of a proprietary device.

In this article, we will briefly and simply explain how to set up a universal remote control and where to find codes for your TV.

What is a universal remote control

It sounds complicated, but in fact, it is a simple device that creates signal pulses suitable for most TVs and set-top boxes.

Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.

The universal model will fit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.

Differences from a regular remote control

The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.

A remote control made by the owner-manufacturer is undoubtedly of higher quality than a Chinese one. However, if the TV is already 5-6 years old, then you will not be able to find a branded remote control for such an old model.

How to find out the TV code?

The code is necessary to be able to connect third-party devices with it. These include remote controls, smartphones or tablets.

It ensures device recognition and correct operation. It consists of a unique set of numbers that can be recognized also on the TV itself.
To do this you will need:

• login to YouTube;
• open settings;
• select the option to connect to your phone;
• after entering the “Connect manually” section, a blue code will appear;
• remember it or write it down.

How to set up a universal remote control

Each device comes with instructions that describe the setup process in detail. We will look at setting up models from popular manufacturers.

Huayu

To configure it you will need:

1. turn on the TV, point the control unit at it and simultaneously hold down the power and “Set” buttons;
2. Watch the indicator carefully, it should be on all the time;
3. use the volume control to set commands;
4. To exit pairing mode, press the “Set” button.

Gal

Automatic adjustment:

1. turn on the TV, point the remote control at it;
2. hold down the button indicating the device type;
3. after the indicator lights up, release it;
4. press the power button on the UE, this will start an automatic code search;
5. As soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.

Sometimes the automatic search does not work well, so you need to configure it manually.

Manual adjustment:

1. after turning on the TV and pressing the “TV” button, the indicator will light up;
2. releasing it, enter the device code;
3. after entering the fourth digit, the code will be saved in the device’s memory and the screen will go dark.

DEXP

Auto-tuning occurs according to the following algorithm:

1. turn on the TV, point the CP at it, press the button indicating the brand of TV;
2. hold down the “Set” button and hold until the indicator lights up;
3. click on channel selection, automatic code selection will begin;
4. Once the indicator goes off, immediately press the “OK” button to save the found code.

If the button is pressed too late, you will have to do everything again.

The advantage is that by searching through channels, you can regulate in which direction the search will be carried out.

Manual code entry must begin after pressing the “Set” button and the indicator lights up. Enter the numbers you found and click OK. The remote control will remember the specified combination.

Supra

Automatic configuration algorithm:

1. turn on the TV, point the remote control at it and hold the “Power” button, release after the indicator lights up;
2. If setup is successful, a volume control bar will appear on the screen
3. Turn off the device using the Power button.

Manual remote control setting:

1. find the code for your device in the previously mentioned article;
2. turn on the TV, point the CP at it, hold down the “Power” button without releasing it, enter the found code;
3. Only after the indicator blinks twice, release the power button.

If after setting up the universal remote control does not work, contact the seller or service center, there may be a defect.

First you need to double-check the codes and repeat the manipulations; sometimes mistakes are made during setup.

Perhaps now you cannot find a single living space or office where modern household appliances are not used. If we're talking about about television and radio equipment, then remote controls are always attached to it. And such devices that make our lives interesting, comfortable and varied are constantly becoming more and more numerous.

In order not to confuse each time which remote control for which device, you can purchase one, but it can turn on and off absolutely all household appliances in your home. Such technical devices have long come into use, but many people are frightened by the fact that they do not know how to set up a universal remote control.

The difference between a regular remote control for a certain type of equipment and a universal one is that inside the small plastic box there is a certain microcircuit that allows you to expand the memory of this device and write commands not to one receiver, but to several at once. Let's figure out how this can be done.

Where to begin?

If you don’t know how to set up a universal remote control for and other home gadgets, then, first of all, you should look into the box from the purchased remote control. Most often, there are specific instructions that will help you figure out how to set up this particular remote control.

On this piece of paper, which is an instruction, you can find codes with which even a person who does not know how to set up a universal remote control for a TV can music center or air conditioner, will be able to do this without problems on his own.

Codes are four-digit combinations of numbers that correspond to a specific brand of household appliance. There are several codes for each of them, and if you fail with the first set of numbers, you can try the next ones.

Active buttons

To set up a universal remote control, we only need a few of the many buttons located on the working surface. These are the TV, SET (or DVB) and POWER buttons. In addition, an important indicator when setting up the remote control will be the signal light, which is present on every universal remote control and is absent on a regular remote control.

Let's start setting up

There are several ways to configure your remote control and if you fail with the first, you should move on to the second and so on. The main thing is not to rush and understand the sequence of actions:

The same algorithm of actions should be carried out with all other household appliances, which can be controlled using a multifunction remote control.

Instructions for all universal IRC remotes
file format.pdf

Brief instructions for universal IRC remotes
file format.pdf
This programmable universal remote control IRC can control eight different

devices. Switching between devices of the IRC remote control is carried out using the following park of buttons: SHIFT and 1

(set by default after installing batteries for the first time), SHIFT and 2, SHIFT and 3, SHIFT and 4, SHIFT and 5, SHIFT and 6, SHIFT and 7,

SHIFT and 8 (see paragraph 2.2).

Any command sent by the remote control is duplicated by a flash of the LED indicator (Fig. 1, point 1).

Purpose of controls

IRC remote:

1. Installing batteries

Remove the battery compartment cover and insert 2 AAA batteries (LR03). When installing, pay attention to

battery polarity ("+" and "-" are indicated directly in the battery compartment).

2. Setting up universal IRC remote control

2.1 Code search.

Find the model of your original remote control in the application. Instead of the model of the original remote control, the following may be given:

model of the device itself. Remember the code indicated next to it in the "Code" column.

If your original remote control is not listed in the appendix to this manual, please refer to point 1 of the notes.

2.2 Selecting a universal IRC remote control device.

Press and hold down the SHIFT button (Fig. 1, point 6).

Press and release one of the remote number buttons 1, 2, 3, 4, 5, 6, 7 or 8.

Release the SHIFT button.

The LED indicator should produce either two short flashes (meaning that a code is stored for this device), or

one long flash (no code is stored for this device).

The pressed numeric button determines the serial number of the IRC remote control device, for which the previously found one will be saved

code.

2.3 Entering the IRC universal remote control setup mode

Press and hold down the SHIFT button (Fig. 1, point 6). Then press and hold down button 9 (Fig. 1, point 4) until

until the LED indicator flashes twice and goes off.

Release the 9 and SHIFT buttons.

2.4 Entering the code.

You have 5 seconds to start entering the previously found code using the number buttons (buttons 0, 1, 2,

3,4,5,6,7,8,9) of the IRC remote control. After dialing the last digit, observe the LED indicator (Fig. 1, item 1). If

), the remote control is ready for use; if it produces one long flash (error),

The LED indicator will flash twice and go out (Ok

go to paragraph 2.1 of this manual.

Check the functionality of the remote control. If you did not find some functions of the original remote control (see in the appendix

description of the functions of all IRC remote control buttons for the entered code), refer to paragraph 1 of the notes.

the code that was stored under the device number of the IRC remote control,

When you enter a new code, the old one is automatically erased

selected in clause 2.2.

If an incorrect code was entered in the IRC remote control setup mode or the 5-second interval has expired (both cases

are characterized by a long flash of the LED indicator), then the old code is saved automatically.

3. Search

3.1 Turn on your device. If this is a VCR or CD, DVD device, then insert a video cassette or

CD respectively.

3.2 Follow step 2.2 (Selecting a device universal remote control IRC).

The pressed number button corresponds to the serial number of the IRC remote control device, which will be saved as defined in

during the code search procedure.

3.3 Follow step 2.3 (Entering the IRC universal remote control setup mode).

3.4 Configuring the IRC remote control for the type of your device (TV; VCR; AUX-CD, DVD; SAT).

Depending on the device to which you want to configure the IRC remote control, press and release button 1 (Fig. 1, point 3), if your

device - TV; button 2 (Fig. 1, item 3) for video equipment; button 3 (Fig. 1, item 3) for audio devices (CD, DVD); button 4

seconds

(Fig. 1, item 3) for satellite television receivers. For this you have approximately 5

3.5 Entering search mode

Press and release the MENU button (Fig. 1, point 5).

The LED indicator should produce two short flashes.

3.6 Search

Point the remote control at the device, press and release one of the buttons: PLAY (Fig. 1, item 9) or (Fig. 1, item 7) for

VCR and CD, DVD devices; buttons OFF (Fig. 1, item 2), 1 (Fig. 1, item 3) or MUTE (Fig. 1, item 7) for the TV. Button 1

mode, and turning on the TV

is carried out only with the digital buttons of the remote control. It is important that the function of the pressed button of the IRC remote control is present in

original remote control for your device.

The remote control is now in search mode: the LED indicator constantly flashes and goes out.

3.7 Ending the search

Immediately release the button you are holding down when your device responds to the IRC remote control command (in

according to the selected button). The LED indicator should produce two short flashes (OK).

Make sure that the remote control performs all the functions of the original remote control.

To find out the code stored in the remote control, refer to paragraph 4 (Code visualization).

If you do not find some functions of the original remote control (see the appendix for a description of the functions of all buttons on the IRC remote control

for the code found during the search procedure), refer to point 1 of the notes.

The LED indicator always signals the end of the search with four short flashes. The search will then be resumed with

started.

button pressed), the search procedure will be resumed from the point at

After interrupting the search (the moment of releasing the held

which the search was interrupted.

The previously stored code for the IRC remote control device selected in paragraph 3.2 is automatically erased.

4. Code visualization

Preliminary explanation:

*each code consists of 3 digits;

*each number is indicated by the number of flashes of the LED indicator, zero is indicated by one long

lighting of the LED indicator;

*between one digit and another, the LED indicator pauses for about a second.

Code 103 will be indicated as: 1 short flash - pause - 1 long flash - pause - 3 short flashes

For example.

LED indicator.

4.1 Follow step 2.2 (Selecting a device universal remote control IRC).

The pressed number button corresponds to the serial number of the IRC remote control device, behind which the code you are interested in is stored.

4.2 Follow step 2.3 (Enter setup mode universal remote control IRC).

4.3 Code visualization.

Press and release the DISPLAY button (Fig. 1, item 8).

Watch the LED indicator, which will indicate the code, as described above.

Notes

1) If you do not know the model of the original remote control or it is not listed in the application, if the device does not follow commands

remote control (or does it incorrectly), then you can sequentially enter all the codes for your device (see in the appendix)

according to paragraph 2 of this instruction or refer to the search procedure in paragraph 3 of this instruction.

When you press the remote control buttons (after replacing the batteries), the LED indicator does not light up or lights up, but the commands

2) If

The number button pressed corresponds to the number

are not performed by the device, then follow step 2.2 (Selecting an IRC remote control device).

IRC remote control device, which stores the code for your device.

If everything remains unchanged, then do the following:

a) remove the batteries from the battery compartment of the remote control;

b) press and hold down one of the remote control buttons for several seconds;

c) reinsert the batteries (see p. "Installing batteries").

3) If the IRC remote control is unstable, the batteries must be replaced. All codes and number of the last current device

remote control IRCs are saved when replacing batteries and if the remote control is left for a long time without batteries.

4) This IRC remote control replaces the most common remote controls of the specified brand.