Replacing iPhone glass separately from the display. Is it possible to replace the glass on a Samsung separately? How much does it cost to change the protective glass on a phone?

Dear friends, we always try to reduce repair prices and provide you with the highest quality repairs at the minimum cost and time. Therefore, we now have a new service available - replacing the glass on an iPhone separately from the display.
Of course, such a service cannot be called “new”, because it has been available from different companies for quite a long time. But the problem is that not everyone, but only a few, can replace the glass from the display efficiently :)
But we have found a solution to this problem and are ready to share it with you. Now let me tell you about the conditions for glass plywood and in what cases it is generally possible.

How does plywood work?

The display, touchscreen and glass on iPhones are a single piece. This means that they are glued to each other over the entire surface with special glue. Therefore, previously, if the display or glass breaks, they were replaced only together with the display module. Now we have agreed with several assembly shops to re-glue the glass separately. For you, this means that if the display and touchscreen on your phone are fully functional, then you can save a lot and replace not the entire part, but only the glass.

What kind of glass can be re-glued?

Only original display modules or restored originals are suitable for re-gluing. This is due to the fact that on the originals the touchscreen (glass sensor) is located on the display itself, and the glass serves as protection. When restoring the display module, the broken glass is simply cut off, the display is cleaned of glue and new glass is glued onto it.
Copies have a slightly different structure. The touchscreen on them is most often located on glass, so it is impossible to cut off the glass separately from the touchscreen in a factory way and thus restore the module. Plus, copy displays are more fragile and have a slightly different structure, so such displays most often simply cannot survive cutting glass. If you already have a copy and it breaks, then in this case you will have to replace the glass and the entire display; such a module cannot be restored.

Another important point when re-gluing - this is the correct operation of the touchscreen.
If on your broken module the glass sensor works everywhere and there are no “dead zones”, then such a display module can be restored. If the sensor does not work in some places or clicks on icons by itself, then such a module cannot be restored, because the touchscreen is located on the display itself.

The fourth condition is the integrity of the touchscreen and display cables, as well as the absence of damage to the display itself. In other words, if the display does not have yellow or black spots, dead pixels or multi-colored stripes, then such a display can be restored.

Terms, warranty and cost of replacing glass separately from the iPhone display.

The guarantee for glass plywood is 30 days regardless of your phone model. Essentially, all functional components remain yours, and if they worked properly, then so be it. In any case, you will have a 30-day guarantee on the re-glued module and if problems arise with the touchscreen or display, we will replace it with a new one free of charge.

How to speed up glass re-gluing?

For many of our clients, time plays a very important role and there is no way to wait 1.5 hours for the broken glass to be re-glued to a new one. We have also provided for this point and can offer something interesting;)
If the display and touchscreen are fully working, but there is no time to wait 1.5 hours, we can install you a display module of original quality and give you the following discount on repairs:

• iPhone 5, 5S, 5C, SE - 500 rubles;
• iPhone 6/6 Plus - 1000 rubles;
• iPhone 6S/6S Plus - 1000 rubles;
• iPhone 7/7 Plus - 1500 rubles;
• iPhone 8/8Plus - 3000 rubles.

We hope that now absolutely all our clients will be happy :)

What can we offer you as a result?

We have worked out 3 options for glass replacement for you:

1. If the touchscreen display is intact, fully functional, and you want exactly your display, then we can only re-glue the glass. It will take about 1.5 hours.
2. If the display is intact and working, but you do not have time to wait 1.5 hours, then we can supply you with a new display module in 25 minutes. You leave your old display to us and we will give you a good discount - from 500 rubles.
3. If your display is damaged and cannot be repaired, then in this case the only option is to replace the display module assembly.

You can find out the prices for replacing the glass of your iPhone on the iPhone Repair page by selecting your phone model. All prices indicated are final and already include spare parts and all work to replace them. Happy renovations!

Cheaper with new technologies

Today, a new technology has been developed for a separate replacement of protective glass for Samsung phones. Previously, to eliminate this type of breakdown, only replacing the entire module was required.

On Samsung phones For most top models, even if the protective glass is slightly cracked, it is necessary to replace the entire assembly of the display unit, as recommended by the manufacturer. Indeed, it is not possible to replace the original display separately! Replacing the entire screen module in an assembly is recommended not only by the manufacturer, but also by most repair services.

At the same time, replacing such a large unit will be very expensive - and this is the main disadvantage of such repairs! If you replace it with non-original glass, it will cost two to three times less than a complete replacement. It is worth noting that original glass does not exist for sale at all. Samsung does not sell glass for its phone screens separately. Everything you see on sale are copies made by other manufacturers. The exception is models in which the sensor can be replaced separately. For such models, the manufacturer supplies sensors with original protective glass separately.

Samsung has such models that can be replaced separately protective glass, A little:

Samsung Galaxy S3

Samsung Galaxy S2

Samsung Galaxy S4 i9500, i9505, L720, I337, I545, M919

Samsung Galaxy Note 2

Samsung Galaxy Note1

Samsung Galaxy Note 3

Samsung Galaxy S4 mini I9190, I9192, I9195

Samsung Premier i9260

Samsung Galaxy Note i9220

Is it worth replacing damaged glass with non-original glass? There are both disadvantages and advantages.

Main advantages:

1. The first and main advantage is the price. Replacing an entire module with an original one from Samsung will cost you at least several times more.

2. You are replacing only the outer protective glass, the sensor and display of your phone will remain original, but will be protected from damage.

Disadvantages of such a replacement, typical for small service centers:

1. Installed module will not be a perfect original display module;

2. The frame around the protective glass will remain the same;

3. During glass replacement work, when the glass itself is separated from the sensor, there is a low probability (about 10-15%) that the display or sensor will be damaged;

4. After the glass is damaged and replaced, small scratches may still remain on the sensor, which will be noticeable;

5. The majority of services or workshops do not have a hermetic zone at their disposal - a special room with a perfectly clean environment.

When replacing the protective glass under normal conditions, there may be a small air bubble or small speck inside. An engineer is sometimes unable to see such a speck with the naked eye. However, it is worth knowing that the glass is attached using a special molecular glue. This is done only once and forever. In case of repeated damage, repeating this operation and peeling off the glass from the display without damaging the display itself will be very difficult, almost impossible.

If you have weighed the pros and cons of replacing the glass separately and decided to do it, you should pay attention to some expert advice:

1. To replace the protective glass, you should contact only professionals who have already done this many times and have all the necessary technical conditions to carry out such work;

2. During installation, the protective glass is attached to a special molecular glue. As a result of this operation, the display and glass form one whole, like the original module from Samsung. When replacing such a module, neither dust nor moisture gets inside. After installing a new one, the display module will work exactly the same as before the protective glass was damaged.

Replacement of glass on iPhone 7 / 7 Plus at a price of 2850 and 3850 rubles for 7 Plus from the company “Display Master”.

Replacing the glass on iPhone 7 with the original

Repair in 40 minutes

1 year warranty!

2 minutes from
Belarusian

We work from 9 to 21:00 every day

When cracks appear on the display of an iPhone 7 or 7 Plus, there is no need to replace the display - just replace the glass.

Replacing glass separately from the display on iPhone 7 is done using special equipment. Several special machines are used.

We took a photo of the equipment and described the process below.

Visit our service centers 2 minutes away
Belarusian.

We are easy to find, the page has all the information with the address and pictures.

iPhone 7 and iPhone 7 Plus glass replacement price per original

Our prices are real (spare part + labor + warranty).

🔥 We reduced them by an average of 20%. 🔥

👉 If the number of new customers does not increase, we will return the previous prices. 👈

Repair in front of the client

One year warranty

Certificate of completion

Cash receipt

Hurry up to receive high-quality service from professionals at the lowest price in Moscow!

The price is final without any additional payments.

Our price of 2850 rubles is one of the lowest in Moscow.

Leave a request 24/7 for 2850!

• Our reputation. Read reviews about us on Yandex or anywhere else.
• High quality and fast service. The average repair time for one device is 40 minutes.
• 1 year warranty. These are not empty words.
• Free diagnostics. We do not charge money for client consultation.
• Acceptable prices. We try to keep prices low. This does not affect the quality of the service.
• Openness and honesty. Each client can contact the manager.

How is iPhone 7 and 7 Plus glass replaced?

Replacement glass iPhone 7 and 7 Plus are made in a dust-free room with an antistatic coating.

The service center is equipped with all necessary equipment.

Using a special machine, we cut off the broken glass from the matrix. Preheat the module on the separator. We clean the matrix with a special solvent.

We use a machine to stick OCA film and polarizer onto the matrix.

A “Vacuum Press” is used to glue the new iPhone glass to the matrix. This is a hermetically sealed container in which a vacuum and the required temperature are created. In it, the glass is perfectly glued to the matrix.

The matrix and glass are glued in an "Autoclave". High pressure and temperature are created there.

What does the iPhone 7 display module consist of:

To understand how to replace the glass of an iPhone 7 Plus, you need to understand the structure of the display module.

• Glass. Performs only a protective function. It cracks on impact.
• OCA film. Bonds glass and matrix.
• Polarizer. Makes the image visible to the eye.
• Sensor. Recognizes pressing and touching.
• Matrix. The most important part of the module. Converts electrical impulses into images.
• Backlight. It is involved in adjusting the screen brightness.

Replacing iPhone 7 and 7 plus glass will not help you if:

• 3D Touch doesn't work- this indicates that the sensor is damaged. It is built into the matrix. It can't be repaired.
• Dead pixels visible- this means the matrix is ​​corrupted.
• The image is dark- if you cannot increase the brightness, then the backlight is damaged. It can also be changed.
• Let's go vertical stripes- this means the matrix is ​​irretrievably damaged.
• The sensor works on its own- The 3D Touch controller has failed. It won't be possible to change it.

These signs indicate that the module has become unusable. In this case, replacing the glass on the iPhone 7 will not work - you need to change the entire module. It will cost you the same amount.

Answers to customer questions

Is it possible to replace the glass on an iPhone 7 at home?

We can send a technician to you with a new original module. He will make a replacement iPhone display 7 for a new one, and the broken one will be taken to the workshop. This way you will save your time - you will not have to go to the service center and wait for the iPhone to be repaired.

Come to our service center at the address: Moscow 1st Tverskaya street - Yamskaya 29 building 1.

Minute from
Belarusian. We work Monday - Sunday from 9:00 to 21:00.

Modern touch phones and tablets have high-quality screens with a large diagonal. They are comfortable to surf the Internet, play games, run various applications, watch photos and videos, and read books. All this can be done by a display module, which is at the same time glass, display and touchscreen. But this element is the most vulnerable part of the phone. In the event of mechanical damage or a fall, it may crack with cobwebs or one unpleasant crack may appear. Previously, in such cases, it was necessary to change the display module, the cost of which was sometimes even almost comparable to the price of a new phone without taking into account the work. Now a similar problem can be solved by replacing only the glass.

What is a glass cut?

Separation is the process of separating the display from the glass when only the glass needs to be replaced. All modern smartphones Available with bonded glass and display. This allows the thickness of the display module to be reduced. Navigation becomes more comfortable, and the image is clear and realistic. Also, in almost all modern phone models there is no air gap between these two elements, which is filled with special OCA glue, this gives the device even greater aesthetics. Separation allows you to divide the display module into individual components and replace damaged glass.

Depending on the phone model, it allows you to save on average about 1,000-15,000 rubles on repair costs. We can replace the glass on any phone in which the entire module needs to be replaced. The cost of such a service is affordable to everyone and will allow you to return the gadget to working condition much cheaper.

When do you need glass replacement on your phone?

1. The touchscreen has broken, cracks, chips, and deep scratches have appeared on it, but the screen still shows. This often happens when the phone falls or other mechanical damage occurs.

2. The sensitivity of the touchscreen has decreased or completely disappeared, and blind spots have appeared. It may occur due to an impact, liquid getting inside the phone, or a manufacturing defect.

3. The protective glass is covered with a network of cracks, but the touchscreen works. Popular phones often use double glass.

For any of these problems, contact our service center and we will quickly replace the glass on your phone or tablet. The professionalism of our craftsmen and affordable prices will appeal to all clients.

How the glass is cut

Cutting glass is a complex procedure that is performed only by professionals using special technology. The work uses specialized equipment and Consumables. Glass replacement in our service center takes place in several stages:

We disassemble the phone or tablet and carefully remove the display.

We layer it using a separator machine or use a special machine that cools the display to -150C

- Using special liquids, we remove the remnants of the old OCA glue, which connected the elements of the display module and removed the air space between the module and the glass.

In a dust-free room, we apply new OCA film and install new glass.

We laminate, pump out the air in a special laminator under a pressure of 5 atmospheres and remove air bubbles.

We collect the phone.

After completing the entire glass replacement procedure, your display is back in working order and free of cracks, and you can use it comfortably again. The cost of such a repair will be several times lower than installing a new display, and in some cases, it will be the only option to restore the phone.

Urgent glass replacement on iPhone.