How to distribute cable internet to your phone. We distribute the Internet from a computer to a phone: how to do it for Android or iPhone. How to distribute Wi-Fi from a computer to a phone - using the command line

You can easily connect your phone, tablet or other device to the high-speed Internet connected to your home through a Wi-Fi router (router). However, such a device is not always at hand (for example, you went to the country, taking a laptop and a wireless USB modem with you). In such cases, you can use the Internet on a mobile gadget through a laptop computer, assigning the functions of a router to it. Let's look at how to make a laptop a Wifi access point.

Methods for creating a wireless access point

Any modern laptop is equipped wireless adapter, which can be used as a Wi-Fi router. To do this, it is necessary to create a kind of virtual bridge connecting network equipment ( Wi-Fi adapter and network card).

To obtain such routing, you can use the following tools:

• using standard Windows OS tools ( graphical application“Network and Sharing Center...”, command line or bat file);
• additional software.

Whatever method is chosen, the following conditions must be met:

Creating a Wireless Access Point Using the Windows Menu

The easiest way to create a virtual router is to use the “Network Center...” function built into the OS. To do this you need:

After a virtual router has been created, in order to successfully use the Internet through it, you may additionally need to enable public access. This is done as follows:

After all the steps have been completed, turn on Wi-Fi on the mobile gadget and start searching for available networks. In the drop-down list, select the name of the network that was specified when creating the virtual Wi-Fi router, and indicate the specified key.

Creating Wi-Fi access via the command line

To connect your phone to the Internet via a laptop, that is, using a virtual router, you can also use the command line. This procedure may seem complicated to an inexperienced user, however, by strictly following the instructions, you will be able to turn on the Wi-Fi hotspot in just a few minutes.

To start distributing wifi from your laptop to your phone, you need to:

To distribute the Internet via a laptop computer to a phone or other device, you need to enable shared access to the newly created Wi-Fi point. To do this, go to the section “ Network connections"and call up the properties of the network through which the Internet is connected to the laptop. After that, in the “Advanced” tab, check the box next to the corresponding item, and in the drop-down list, select the name of the created virtual router.

Using a bat file

Creating a Wi-Fi access point via the command line is inconvenient because every time you turn off the PC you need to re-enter all the commands. That's why this method turning a laptop computer into a router can only be used for a one-time Internet connection to the phone.

The execution of the above commands can be fully automated. To do this, you need the standard text editor Windows, write a small script, and then save the document on the laptop desktop under any name in .bat format. To start distributing Wi-Fi using a virtual router to your phone, you just need to run this document with administrator rights. An example of a script is shown in the figure, where YourSSID and YourPassword are the name wireless connection and the access key to it.

Creating a virtual router using additional software

If none of the above methods helped activate Internet distribution on your phone, you can try creating a virtual Wi-Fi router using special software. There are quite a lot of similar utilities on the Internet, but among them the most convenient are:

• MyPublicWiFi;
• Connectify.

Wi-Fi distribution using MyPublicWiFi

This application is absolutely free and has a user-friendly interface, although foreign language. With it, you can make a Wi-Fi access point in just a few clicks:

Creating a Wi-Fi hotspot using Connectify

The MyPublicWiFi utility may experience problems if the Internet is connected to the laptop not via a cable, but via a USB modem. In this case, it is better to use the Connectify application. There is a paid and free version of this program. For periodic use, the second option is sufficient. To enable Wi-Fi distribution from a PC to a phone using Connectify, you must:

Possible difficulties when creating a Wi-Fi access point

When creating a new Wi-Fi access point, users often encounter minor difficulties. The table shows the most common problems that can prevent you from distributing the Internet from a laptop, and possible solutions to solve them.

The essence of the problem	The reason behind this	Possible Solution
The phone can't take directions Wi-Fi network, although it is running	Blocking the connection by an installed antivirus or firewall	Temporarily disable your firewall or antivirus program
The Internet does not work on the phone, although Wi-Fi is connected	The user forgot to enable sharing when setting up	Go to Network and Sharing Center and turn on sharing
	The connection is blocked by a firewall or antivirus program	Disable online protection temporarily
The message “The network could not be started” pops up.	The wireless adapter is disabled on the laptop	Turn on Wi-Fi in your laptop settings
	Drivers for the adapter do not work correctly	Update drivers using the disk that came with your PC or the Internet

If your PC has a cable Internet connection, you can quickly set up a Wi-Fi point without purchasing additional equipment in the form of a router.

The main thing is that your PC has a Wi-Fi adapter. In all modern laptops, such a wireless module is already built in by the manufacturer, and if this unit is not included in desktop computer, you can purchase it and connect it.

The cost of purchasing a Wi-Fi adapter will be significantly lower than the cost of a wireless router.

Wi-Fi distribution methods

There are several effective options for distributing Wi-Fi via home computer, for example, using the built-in tools of the operating system, using applications from third-party developers, and also in Windows 10 you can use mobile Hotspot.

One of the main conditions for the successful implementation of the task is that a cable from the provider, that is, an Internet source, is connected to the PC, and the computer must be equipped with a special wireless module.

If your PC does not have a Wi-Fi module, the most convenient option is to connect an external Wi-Fi adapter to it via a USB port.

Please note that driver installation is required for normal operation devices.

If Windows 10 is installed on your PC, then for the most part the system installs the software on its own.

If the computer is running for more than earlier versions OS, it is recommended that you visit the official resource of the hardware developer, download and install drivers on your computer.

In order to analyze the performance of the Wi-Fi adapter, you need to open the console with extended rights and type: “netsh wlan show drivers”.

Then click “Enter”. You should then see a positive response message in the Hosted Network Support column.

After completing the preparatory steps described above and making sure that all resources are available, you can begin organizing a wireless network without using a router.

Without a router. Using programs

There are many applications designed specifically to distribute Wi-Fi to other home devices of the user through a computer.

After all, almost every modern smart phone has operating systems: Android, Windows and iOS, capable of logging into world wide web via Wi-Fi.

"mHotspot"

The mHotspot program has many positive reviews.

You don’t even need to install it on a PC or laptop, and by downloading it from the resource “mhotspot.com”, you can immediately launch and organize a home wireless point without using a router.

Once you open the application, you must do the following:

"My Public"

Like the previous utility, it does not require installation. All you need to do is download “MyPublikWiFi” and use it right away.

To distribute the Internet using this application, you will need to complete the following steps:

"Switch Virtual Router"

IN Windows environment The “Switch Virtual Router” program works great. It is available for download and installation on the Internet for free.

Settings are made in an intuitive interface, which is completely Russified.

The application can launch automatically immediately after the PC boots. The user is once required to indicate the name and password for the Wi-Fi being created and check the boxes that interest him.

Without programs

If it is not possible to install specialized utilities on your PC, you can successfully solve the problem using the built-in Windows tools.

All currently supported by the company Microsoft Windows are able to share an existing connection.

On different OS

To realize your plans, you need to perform several successive steps:

Note: It is better to enter the name invented by the computer owner himself, the main thing is that he can remember it and then find it in the list of connections.

To provide reliable protection connection, it is advisable to come up with and print a complex access code, which consists of symbols and numbers, instead of “koddoctupa”.

When you need to stop the broadcast, you need to type in the console: “netsh wlan stop hostednetwork”. Click Enter.

Via the command line in Windows 10

In "Ten", the procedure for turning a PC into a modem is almost no different from performing actions in earlier versions of the OS and is also carried out via the console.

Steps:

1. Run the CS with extended permissions and type: “netsh wlan set hostednetwork mode=allow ssid=TochkaDostupa key=koddoctupa”;
2. Click “Enter”;
3. Paste “netsh wlan start hostednetwork”;
4. Click “Enter” again;
5. Right-click “Start”, click the line “Network connections”;
6. Right-click on the current connection and enter “Properties”;
7. Give permission to other clients to connect.

Windows 10 (Mobile hotspot)

The new OS with index “10” has a convenient method for solving the problem.

Therefore, if the user has this latest development from Microsoft installed, he will simply need to new feature write down the name, code and indicate the connection.

You only need to complete a few sequential steps:

Note: Sometimes the steps described above do not lead to a successful solution to the problem. The reason for this is the security utilities running on the PC, so it is recommended to temporarily disable the antivirus and firewall.

Windows 7

Today, "Seven" continues to hold the palm of leadership among popular OS for PCs. In it, you can organize Wi-Fi distribution using the OS using 2 methods:

1. Via the console (the method has already been discussed earlier in this guide);
2. By setting up your network environment.

Setting up your network environment

In a PC on “Seven” you need to perform the following actions:

Using the Conectify Hotspot program

Several steps need to be completed:

Connection control is available in the application menu.

How to distribute the Internet from a laptop?

The setup process via a laptop is no different from a desktop PC, so the above methods work great for laptops as well.

The main thing is that the device has a Wi-Fi module or it must be connected via a USB connector.

Create a Wi-Fi hotspot

You can use Windows tools or third party applications mentioned above.

In Windows 7, 8 and 10, the method of creating a point through the console works fine.

After this, you will also need to perform similar actions in the properties of the current connection.

To pause and resume distribution, use the commands shown in the figure below:

As you can see, all actions and commands are completely similar and work well on a mobile computer.

A mobile phone is multifunctional, including the ability to act as a modem and provide Internet access to another phone, tablet, laptop, or PC. This function does not depend on the cellular model or its system - any device with access to 2G, 3G, 4G can transmit the Internet. There are several ways to distribute Mobile Internet.

You might also be interested in:

We use a Wi-Fi connection

Distributing Wi-Fi from your phone is quite simple and fast. Distribution is carried out to any device that supports networks. The dispensing device must have mobile Internet and network access configured. Network operators limit the free use of this method of Internet distribution and, in case of large transfer volumes, warn about daily payment for the service.

Creating a hotspot on Android

In order to understand how to distribute the Internet from Android, you should understand the menu and carry out the following actions:

Instructions for Windows Phone

How to distribute Internet from a phone with OS Windows Phone? The general principle is similar to Android:

We distribute the Internet from an iOS phone

The iPhone has a very detailed instructions about how to distribute Wi-Fi from your phone. Distribution can be done from your phone to a laptop, PC, tablet or other device:

Necessary steps on PC or laptop

In order to distribute the Internet from your phone to your computer, a USB cord or connected to computer bluetooth. To install an access point on a PC you must:

We connect the phone as a USB modem

We connect the phone as a Bluetooth modem

You can distribute wifi via your phone to a PC, smartphone or other device. You can transfer your phone's Internet by making a note.

We use various programs and applications (FoxFi, PdaNet+, etc.)

You can distribute the Internet using programs, using their functionality and capabilities. It is possible to distribute wifi from your phone to a computer or other device via.

There are times when there is a need to access the Internet from a phone or tablet, but, as luck would have it, there is not one at hand WiFi networks. In this case, it is not necessary to buy traffic or look for a free access point. Advanced users and IT specialists know how to distribute wifi from a laptop and computer if an adapter is installed on it. We hope these methods will help everyone else quickly start distributing wifi without a router and provide themselves with a stable connection.

Using a laptop as a WiFi access point is quite simple, and the speed provided when using this device is sufficient for comfortable browsing on the Internet. It is possible to distribute via WiFi from a laptop using:

• Built-in Windows tools.
• Third party software.

There are a lot of programs that allow you to distribute via wifi from a laptop, but not all provide a high-quality connection. However, for certain tasks this is sufficient. In turn, it is possible to distribute a signal to Windows 7,8,10 from a laptop using built-in tools in only two ways.

It is also possible to distribute wifi from a computer, but in this case an adapter must be installed on it wireless communication. It is installed extremely rarely in the factory assembly; it is most often used external device. This adapter resembles a radio receiver from a wireless mouse and provides a good Bluetooth and WiFi signal.

Preparing the laptop

If the laptop is connected to the network via a Lan cable and you need to distribute Wi-Fi from the laptop as a router, there is nothing complicated about it. The main thing is to create normal connection so that the device itself has access to the Internet. You also need to check the functionality of the built-in network adapter.

It is easy to check the operation of the network cable. When it is connected to a laptop, the “Internet Access” icon appears in the lower right corner of the taskbar:

The main reason why the laptop does not distribute wifi and there is no Internet connection is a faulty cable or its insufficiently tight contact with the socket. In this case, the icon looks like this:

After connecting the cable, it's time to check the operation of the adapter. To do this, you need to go to “My Computer”. This is done as follows: open the Start menu or click on the Windows button. Next, find the “Computer” button and click on it. In the menu that opens, right-click on any free area and select the last item - “Properties”.

In the upper left corner, find the “Device Manager” section, click on it and find “Network adapters” in the list. All installed ones will be displayed in the drop-down menu. You need to find a line where NetWork is mentioned, for example:

Right-click on it (RMB), if there is an “Enable” item, activate it; if there is no such option, it means that it is already working and you can start setting up Wi-Fi.

The necessary virtual wifi access point for the laptop to simultaneously receive and distribute a signal, in this case using Windows 7 (and any other Windows will not cope), requires additional software. You can take a more trivial route and install an additional removable adapter, but below we will tell you how to get by without extra costs using special software.

Wi-Fi distribution using built-in tools

The first way to make a wifi access point on a laptop , very simple and appeared in Windows systems 10, versions older than 1607. This all happens in the graphical menu and without using commands.

First you need to open the “Start” menu, find it in the “Settings” column on the left. Open it and launch “Network and Internet”. Among the list of suggested parameters, find and open “Mobile hotspot”. Then immediately turn it on by dragging the slider, or click on the “Change” button and enter your own password and name for the future connection. That's it, after this the point will work. The answer to the question of how to properly distribute wifi on a laptop has been found.

Distributing Wi-Fi using the command line and netsh

The second way to distribute the Internet from a laptop is to use the built-in Windows tools. They are also called Wireless Hosted Network, they are available on all versions, starting with “seven”. Following these instructions using command line It is also possible to distribute WiFi on a laptop.

To get started, go to Windows menu and in the lower window “Find programs and files” enter “cmd”, in the proposed programs you can see one single entry: “cmd.exe”. Right-click on it and run as administrator. In the black window that opens, you need to copy and paste the following command: netsh wlan set hostednetwork mode=allow ssid="1111" key="11111111"keyUsage=persistent.

Where 1111 is the name of the network, and eight units are the wifi password. This data can be changed to something more familiar to the user, as long as the password consists of eight or more characters.

This is the basic command for distributing WiFi via the command line. If everything is done correctly, an entry will appear informing you that the Virtual WiFi network has been created:

All that remains is to launch virtual network so that the laptop distributes WiFi. To do this, copy and enter another command: netsh wlan start hostednetwork. If the launch is successful, you can see that the hosted network is running.

If, after all that has been done, the Internet does not work when distributing from a laptop, you need to additionally enable the virtual adapter created by the system. Usually it starts automatically, but there are also bugs. It is used so that you can connect to the created WiFi from other laptops and from Android. To do this, go to “Device Manager”, in the “Network Adapters” section and enable the virtual adapter that appears in the list. How to turn adapters on and off was described above. Only now our adapter has specific name– Microsoft Hosted Network Virtual Adapter.

If you decide to enable a WiFi access point on a laptop running Windows 10, you need to check whether sharing is enabled. To do this, click the PMC on the “Start” window, find “Network Connections”, click on the PMC, go to the “Properties” tab, “Access” and check both boxes in the menu so that everyone uses the connection.

Distributing Wi-Fi using programs

If difficulties arise during the creation of a Windows 7 wifi access point and the system does not work, you can look for the reason for a very long time. It's easier to use programs. They automatically connect all services, start virtual router manager, so the user practically doesn't have to do anything. Also, some programs from a laptop “create” a repeater. It turns out this way: for it to distribute WiFi, you do not need to have a computer connected via a Lan cable. You can distribute the Internet and at the same time receive it yourself via wifi from another laptop or even a phone. But, of course, not every free version of the application provides this opportunity.

Connectify

If it is difficult to understand how to distribute Wi-Fi from a computer to a phone using an adapter as a router, then for Windows 7 there is a very simple and intuitive program - “Connectify”. Need to download free version program from the official website or other source and install it, then restart the computer and begin setting up a new network.

Understanding how to set up wifi distribution via a laptop running Windows 7 is quite simple. After launching the application, a program window will appear with several empty fields:

1. “HotsSpotName”: here you must enter the name of the future network. It will appear when searching for WiFi from a tablet or phone.
2. “Password”: create a password for the network.
3. “Internet to Share”: select which Internet connection will be broadcast.
4. “Share Over”: determine the method of Internet distribution. Either by local network, if it contains devices connected via a Lan cable, or WiFi. You need to choose the second method.
5. “Sharing Mode”: selecting an adapter to broadcast the signal if the computer has one adapter capable of distributing WiFi. This means that at this point there will be only one of the options.

The “Connectify” program is a paid version, it sets almost all the settings itself, but using these hints, the user will configure everything independently, quickly and correctly.

This application is another way to quickly distribute wifi from a laptop. First you need to download and install the program. Next, right-click on the shortcut located on the desktop and run it as administrator.

There are very few settings here; in the first field – Network Name – you should enter the name of the future network. Network key is the future password. Enable Internet Sharing is the most interesting part of the program, since here it is possible to select both a local cable and another Wi-Fi as the initial connection. That is, this program on the computer uses it as a router and repeater.

Mypublicwifi is a free product that has powerful and convenient functionality, despite its simplicity.

MHotSpot

After downloading and installing this program, run it as an administrator in Windows and proceed to the setup stage. The standard menu is used here, as in previous programs. One difference: in the last column you can select the maximum number of users who can connect to the network. The program creates WiFi using only a Lan cable as an Internet connection, but allows you to distribute the Internet from a computer to a phone or to another laptop without problems and very quickly.

This is the easiest way to distribute WiFi from a laptop. Download the program and run it. The menu is simple: only three fields. In the first section, enter the name of the network, in the second - the password (at least eight characters) and in the last section, select the method of Internet distribution: WiFi. That’s it, click on the “Start” button and enjoy the availability of Internet connection.

Security when distributing Wi-Fi from a laptop

In addition, when creating a password in the listed programs, it is possible to select an encryption code. The most secure is WPA 2.

Problems and solutions when creating a Wi-Fi access point

When creating your own WiFi network on a laptop, problems sometimes arise. For example, a network has been created, but the phone “does not see” it. In this case, you need to restart the network adapter. To do this, find it in Device Manager, turn it off and on again. More details on how to enter the “Dispatcher” are provided in the “Preparing the laptop” section.

Also, when creating a wireless point, you need to check whether the Airplane mode is turned off; this applies to both laptops and phones. For these purposes, there is a special key on the keyboard, in the top line above the numbers, with the identification sign “airplane”.

To distribute the Internet on a laptop, you need to disable the antivirus and Windows firewall. The easiest way to do this is through “msconfig”. To do this, press Windows + R and enter “msconfig” in the line that appears. In the new “System Configuration” window, find the “Services” tab. The list includes antivirus (Kaspersky, Eset 32, Avast, etc.) and Windows Firewall. You need to uncheck the boxes next to them, save the settings and restart the laptop.

The method for distributing WiFi from a PC is no different, of course, if it is equipped with an adapter. It is recommended to first update the drivers using the Driver Booster 5 program. Now it is clear whether the laptop can distribute wifi and how to prepare it for this process.

Connecting your phone to your computer via wifi will help you significantly save expensive 3G traffic and create your own wireless network even without access to a router. And in this article we will look at how to distribute wifi from a computer to a phone, and also touch on technical features such a non-standard Wi-Fi network.

Of course, you can distribute Wi-Fi from a computer to a phone without a router only if the PC has its own wifi adapter. This question discussed in more detail in articles And.

So, among the most common ways to connect your phone to a computer via wifi, you can note creating a Wi-Fi connection using Windows and using the command line. By the way, the computer here acts not only as an access point, but also as a repeater.

How to distribute Wi-Fi from a computer to a phone via the Windows 7 interface?

To begin with, let's look at the option of connecting via Wi-Fi using Windows 7: this is the simplest and most universal way to create a network between a computer and a phone.

Please note that the names of folders and files for others Windows versions may differ slightly.

• - To transfer files from a computer to a phone via wifi, the PC must have an active Internet connection;
• - Create a new connection “Wireless computer-to-computer network”;

• - Fill in the network name (for example, let’s call it “MyNewNetwork”), (WPA2 - PSK) and the key (create a password) for the created network, and click “Save settings” - “Next”;

• - Click "Turn on connection sharing." This completes the transformation of the computer into an access point. In the "Options" section public access» set “enable” on all required items

Now, from your phone, search for available wifi points, find the network you created (“MyNewNetwork”) and connect to it by entering the security key.

How to distribute Wi-Fi from a computer to a phone via the command line?

To distribute the Internet from a computer to a phone via wifi:

Open "Command Prompt";

Enter “netsh wlan set hostednetwork mode=allow ssid= wifi phone key=000000 keyUsage=persistent” (accordingly, all commands are entered without quotes);

• - a notification will appear indicating the successful placement of the network you created (“MyNewNetwork”);
• - in the “Device Manager” (“My Computer” - “Manage”) a device called “Microsoft Virtual WiFi Miniport Adapter” will appear;
• - click on the created connection and open “Property” - “Access”;
• - set both parameters to share and select a new connection from the list.

To enable the network, open Command Prompt again and type “netsh wlan start hostednetwork”.

This command must be entered every time you turn on the computer - thereby you determine when to provide access to your network.

To disable - “netsh wlan stop hostednetwork”.

To change the name or password - “netsh wlan set hostednetwork mode=allow ssid=”WifiNewName” key=”New password” keyUsage=persistent”.

To recover your password - “netsh wlan show hostednetwork setting=security”.

In addition, to simplify connecting your phone via wifi to a computer, you can make a mini-utility that will contain a command to start the network:

Open Notepad or Notepad++ editor and enter the command to start the network;

Save the file with the extension .bat in the “File name” column, for example - new-wifi.bat;

After saving the program, to start the network, just open this file.

The .bat files, and especially the .vbs files, require the English keyboard layout to be enabled.

However, such a network has a significant drawback: the computer will distribute Wi-Fi to the phone and other devices only in the “active” operating mode, but the network will become unavailable even if the PC simply goes into sleep mode. Therefore, it is recommended to immediately disable the “Hibernation” mode.

How to connect a phone to a computer via wifi: automatic network mode

You can also configure the network to automatically turn on and off if you need to distribute the Internet for a limited time.

Create 2 .bat files: one with the enable command, and the other, respectively, with the disable command. For this:

• - “Start” - “Control Panel” - “System and Maintenance” - “Administration” - “Task Scheduler” (or maybe “Scheduled Tasks”);
• - Set each file (on/off) to its own task: let’s say you will distribute the Internet every day from 12:00, and the second file with shutdown will be launched every day at 16:00.

Sometimes the error “Could not connect to the network...” appears or it simply goes “permanently” without access to the Internet.

The reason that Wi-Fi does not work on the phone (but works on the computer) may be:

Blocking the connection with Windows Firewall

Blocking the connection by antivirus.