Philips xenium how to reset to factory settings. Factory reset Philips S395. PHILLIPS Secret Codes

Philips Xenium V377 works under control operating system Android 5.1. Its performance is rated 0 out of 5 (in its segment). This smartphone needs further evaluation. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights to Philips

Characteristics

1. Battery capacity: 5000 mAh
2. Battery type: Li-Ion
3. Talk time: 29 h
4. Standby time: 1100 h
5. Equipment: smartphone, battery, Charger, cable USB data, stereo headset
6. Type: smartphone
7. Weight: 190 g
8. Control: touch buttons
9. Case material: plastic
10. Operating system: Android 5.1
11. Case type: classic
12. Number of SIM cards: 2
13. Multi-SIM operating mode: alternating
14. Dimensions (WxHxD): 74x145x10.9 mm
15. Screen type: color IPS, 16.78 million colors, touch
16. Touch screen type: multi-touch, capacitive
17. Diagonal: 5 inch.
18. Image size: 1280x720
19. Pixels per inch (PPI): 294
20. Camera: 5 million pixels, 2592x1944, LED flash
21. Video recording: yes (3GP)
22. Front camera: yes
23. Audio: MP3, AAC, WAV, FM radio
24. Headphone Jack: 3.5mm
25. Max. Video frame rate: 30fps
26. Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
27. Standard: GSM 900/1800/1900, 3G
28. Satellite navigation: GPS
29. A-GPS system: yes
30. Processor: 1300 MHz
31. Number of processor cores: 4
32. Built-in memory: 8 GB
33. Volume random access memory: 1 GB
34. Amount of memory available to the user: 3.50 GB
35. Memory card slot: yes, up to 32 GB
36. Control: voice dialing, voice control
37. Airplane mode: yes
38. A2DP profile: yes

»

Firmware for Philips Xenium V377

Firmware for SP Flash Tool -
Software Update -

1) Download the update file and place it in the root of the SD card.
2) Turn off your phone.
3) Turn on by simultaneously pressing and holding the Power key and Volume Up key.
4) Use the Volume Plus key to select “ Recovery mode» Confirming your choice with the volume minus key.
5) When the Android picture appears, press the power key and the volume “+” key simultaneously for 1-2 seconds.
6)Use the volume keys to select “apply update from sdcard” and confirm the action with the power key.
7) Select the update file and confirm your choice using the Power key.
8) After the update is complete, select “reboot system now” and press the Power key.

To ensure correct operation of the device after updating the software, the manufacturer recommends performing a reset to factory settings: menu - settings - recovery and reset - reset settings - reset device settings. Please note that all user information from the device memory (contacts, SMS/MMS messages, downloaded applications) will be deleted.

If a custom or official firmware on Phillips, then create a topic on the forum, in the section, our specialists will quickly and free of charge, including. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for Philips Xenium V377 will also appear on this page. Please note that this Philips model requires an individual ROM file, so you should not try firmware files from other devices.

Which ones are there? custom firmware(firmware)?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK(MoKee)
4. FlymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and shortcomings of a Philips smartphone and how to fix them?

• If the Xenium V377 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
• If stuck during update / stuck when turned on (needs flashing, 100%)
• Doesn't charge (usually hardware problems)
• Does not see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Philips Xenium V377

Instructions on how to do it Hard Reset on Philips Xenium V377 (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .

Reset codes (open the dialer and enter them).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset via Recovery

1. Turn off your device -> go to Recovery
2. "wipe data/factory reset"
3. “yes - delete all user data” -> “Reboot System”

How to log into Recovery?

1. hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
2. A menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Philips Xenium V377 You can do it in a very simple way:

1. Settings->Backup and reset
2. Reset settings (at the very bottom)

How to reset a pattern key

How to reset graphic key, if you forgot it and now you can’t unlock your Philips smartphone. On the Xenium V377 model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

This method is very simple, but will not work for you if you have an unknown pattern. This is relevant if there is a malfunction in the phone’s brain. So:

Hard reset:

To factory reset your Philips S308, do the following:

1. The very first thing you need to do is charge your phone.
2. Then turn off the phone.
3. Now you need to press the buttons simultaneously “home” + “power on” + “volume down”.
4. After pressing these keys correctly, the download will occur. Android system resovery.
5. Then you need to act extremely quickly, otherwise the phone will reboot itself.
   • Using the “volume down” button, go down to the point “wipe data/factory reset”;
   • press the power button (on the Philips S308 phone this is the “ok” button);
   • After carrying out the above-described manipulations, a huge number of “no” and only one “ will appear on the screen of your phone. yes" We need to select “ yes" To do this, use the “volume down” button again. (Accordingly, to raise it by several points, use the “volume up” button). Then press the power button again;
   • The reset process starts. You need to wait until all activity on the screen ends and select from the list “reboot system now”. After resetting the settings, the phone may begin to turn off on its own. Don't be alarmed, this is normal;
6. All. The settings have been reset to factory settings, previously downloaded data has been deleted and lost.

3. Hardware Hard Reset:

You can easily unlock or restore to factory settings your mobile phone Philips android free. You don't need any knowledge software. Here we also provide password recovery tools and Android drivers and with yours account Google etc. Please note: A hard reset deletes all your data from your mobile phone. If you have an older phone model, see Philips standard passwords. Read on to find out how to reset your Philips.

You will not recover your data such as apps, contacts and files etc. Also provide recovery codes (Keys) and how to unlock Android mobile PIN. You can also format or delete the privacy protection password.

A hard reset, also known as a factory reset or master reset, is the restoration (Format) of a device to the state it was in when it left the factory. All settings, applications and data added by the user are deleted, which means they will be deleted forever. You need to hard reset your mobile phone if your mobile performance is very slow or freezes and has problems or get rid of any virus.

Important things to know before resetting your Philips:

You should read the following article before rebooting or factory resetting any mobile phone. If you don't follow the instructions below, you will lose some valuable data on your mobile phone. These important points help you reset your Android or Windows Mobile without any errors.

Hard reset Philips

Hard reset Philips manually way. A hard reset will delete all your data such as photos, contacts and apps(apps) on mobile device Android. You will not be able to recover your files after resetting your mobile phone. So first try to recover your password. If you are unable to recover your PIN or password, follow this method.

1. Turn off Philips phone

2. Then press and hold

3. Volume Up button + Power button (or)

4. Home button + Volume Up + Power button (or)

5. Volume down button + power button (or)

6. Volume Down Button + Volume Up Button + Power Button

7. Please try all the steps one by one until you see the Android menu.

8. Then, to go to the recovery mode menu, short press the Power key.

9. Then select the option: “Wipe data/Factory reset” using the “Volume Down” button and the “Power” button to confirm the operation.

10. Then on the next screen select - delete all user data using the volume button, press the power button to confirm.

11. Finally, press the Power button to enter the “reboot system now” option.

12. Finally, hard reset is done on your mobile device.

Factory reset Philips via Settings

You can reset your settings to default. Resetting Philips will delete all your data. To perform a factory data reset using the Settings menu, follow these steps:

1. First, open the Settings menu, On Mobile.

2. Then in the “Personal” section, click “ Backup and reset". You need to enter your PIN, pattern or password.

3. Then, under Personal Data, tap Factory Data Reset.

4. Then read the information on the screen and tap Reset Phone.

5. If you have a screen lock, you will need to enter your PIN, pattern or password.

6. Then once the window appears, click Erase everything to erase or delete all data from the internal storage of your mobile device.

7. Finally, when your device has finished formatting, select the option to reboot your device.

8. Philips reset on your mobile device has been completed successfully.

PHILLIPS Secret Codes

PHILLIPS:
*#06# -> Displays imei
*#2254*# -> Status Register: C, BS, RR, MMI, CREAT
*#2255*# -> Activate and deactivate “DEBUG CALL” –
* # 2558 * # -> Time in days, hours and minutes you are connected to the network
*#2562*# ->Not Clear; the phone reconnects to the network
*#2565*# ->Not Clear; Warmstart?
* # 3333 * # -> (NO) LOCK - list (15 items)
* # 2377 * # -> “BEER”: unclear, the phone waits for a random time and connects to the network again,
sometimes the phone resets
* # 3377 * # -> Init, Flags, SIM LCK
* # 3353 * # -> Resets the list of (NO) BLOCKS
* # 7378 * # -> Name, length, SIM phase
* # 7489 * # ->
*#7693*# -> You can activate and deactivate SLEEP MODE
(will go down when deactivating the battery)
*#7787*# -> Fuzzy: SPURIOUS INTERRUPT
* #7948 * # -> SWITCH OFF: fuzzy; is it a timer or something
*#8463*# -> Some information about SLEEP MODE
Philips Genie (TCD838)
*#2337*# -> Will be activated sound signal when the mobile phone is connected to the network again

Today we will find out how you can hard reset your Philips Xenium and reset your smartphone to factory settings.

One of the main and necessary functions of any Android smartphone is a hard reset, or factory reset. Next I will tell you about two ways to do a Philips Xenium hard reset.

The first way to reset philips xenium is from the settings menu, so it is necessary that the smartphone is working.

The second method is used if the smartphone does not turn on, or you have forgotten the PIN code, pattern key, etc. For the second method, we will use system recovery mode. We'll tell you how you can get it running.

Before proceeding with the instructions on how to hard reset your Philips Xenium, we want to warn you that all personal data on your smartphone will be deleted. If you have important files, photos, contacts, applications, we recommend making a backup copy.

So let's get started!

The first way to hard reset Philips Xenium from the settings menu

As we already said, this method can only be used if you have access to the smartphone settings menu.

To make a Philips Xenium hard reset, you need to go to the settings of your smartphone, then select the Privacy tab (in some models the tab is called Recovery and Reset) and click on the Reset button there.

After rebooting, the smartphone will return to its factory state.

Second method Philips Xenium hard reset from recovery mode

If you have forgotten your pattern, PIN code, password, or your smartphone simply won’t turn on, you can try to hard reset your Philips Xenium by pressing certain buttons. To do this, follow these steps:

That's all! Two great ways to hard reset your Philips Xenium and return your smartphone to working condition.

Option 1

1. You need to turn off the device
2. Press for 2-3 seconds Volume(+) + Inclusion
3. Stop pressing the buttons when a picture with a green robot or brand logo appears on the display
4. Clamp Inclusion to enter Recovery mode
5. Select wipe data/factory reset using the buttons Volume Control and confirm by pressing the button Nutrition

6. Then in the menu select Yes--delete all user data by pressing the keys Volume Control and confirm your choice by pressing the button Nutrition

7. At the end, to complete the reset and reboot, confirm the reboot system now item

8. The reset will be completed after the gadget restarts

Option 2

1. Open the Phone Settings item

2. Next point Recovery and reset

3. Then select Reset settings

4. Click on the Reset button and agree to the destruction of all personal information
5. After the gadget reboots, the reset process is completed

Philips S395 factory reset

Attention!

• Videos or images for some operations may not exactly match your phone model.
• When full reset Before the factory settings will be completed, all personal data and applications that are installed in the memory will be deleted.
• In order for the settings to be reset correctly, the battery must be charged to 80%.