What does it mean the interface is not supported. How to fix EXE error. This interface is not supported. Other ways to solve the error

On some computers an error appeared: explorer.exe “interface not supported.” No restore point rollback, no updates provided positive results. After the error occurred, the system began to behave horribly: programs stopped working (exe simply did not execute), Explorer did not open - in general, it was impossible to debug and find out the reason

The problem was with the dll libraries. There are several solutions. On one computer one thing will help, on another - another:

The first solution to the “interface is not supported” problem in Windows 7

Create a .bat. Run it as Administrator and then restart your computer:

Regsvr32 comcat.dll /s regsvr32 CSSEQCHK.DLL /s regsvr32 shdoc401.dll /s regsvr32 shdoc401.dll /i /s regsvr32 asctrls.ocx /s regsvr32 oleaut32.dll /s regsvr32 shdocvw.dll /I /s regs vr32 shdocvw.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /I /s regsvr32 msrating.dll /s regsvr32 mlang.dll /s regsvr32 hlink.dll /s rem regsvr32 mshtml.dll /s regsvr32 mshtmled. dll /s regsvr32 urlmon.dll /s regsvr32 plugin.ocx /s regsvr32 sendmail.dll /s rem regsvr32 comctl32.dll /i /s rem regsvr32 inetcpl.cpl /i /s rem regsvr32 mshtml.dll /i /s regsvr32 scrobj .dll /s regsvr32 mmefxe.ocx /s rem regsvr32 proctexe.ocx mshta.exe /register /s regsvr32 corpol.dll /s regsvr32 jscript.dll /s regsvr32 msxml.dll /s regsvr32 imgutil.dll /s regsvr32 thumbvw.dll /s regsvr32 cryptext.dll /s regsvr32 rsabase.dll /s rem regsvr32 triedit.dll /s rem regsvr32 dhtmled.ocx /s regsvr32 inseng.dll /s regsvr32 iesetup.dll /i /s rem regsvr32 hmmapi.dll /s regsvr3 2 Cryptdlg.dll /s Regsvr32 ActxPrxy.dll /S Regsvr32 Dispex.dll /S REGSVR32 OCCACHE.DLL /S Regsvr32 OCCACHE.DLL /S /S REGSVR32 IEPEERS.DLL /S RAMSVR32 Winin et.dll /i /s Regsvr32 urlmon.dll /i /s rem regsvr32 digest.dll /i /s regsvr32 cdfview.dll /s regsvr32 webcheck.dll /s regsvr32 mobsync.dll /s regsvr32 pngfilt.dll /s regsvr32 licmgr10.dll /s regsvr32 icmfilter.dll /s regsvr32 hhctrl.ocx /s regsvr32 inetcfg.dll /s rem regsvr32 trialoc.dll /s regsvr32 tdc.ocx /s regsvr32 MSR2C.DLL /s regsvr32 msident.dll /s regsvr32 msieftp.dll /s regsvr32 xmsconf.ocx /s reg svr32 ils .dll /s regsvr32 msoeacct.dll /s rem regsvr32 wab32.dll /s rem regsvr32 wabimp.dll /s rem regsvr32 wabfind.dll /s rem regsvr32 oemiglib.dll /s rem regsvr32 directdb.dll /s regsvr32 inetcomm. dll/ s rem regsvr32 msoe.dll /s rem regsvr32 oeimport.dll /s regsvr32 msdxm.ocx /s regsvr32 dxmasf.dll /s rem regsvr32 laprxy.dll /s regsvr32 l3codecx.ax /s regsvr32 acelpdec.ax /s regsv r32 mpg4ds32.ax /s regsvr32 voxmsdec.ax /s regsvr32 danim.dll /s regsvr32 Daxctle.ocx /s regsvr32 lmrt.dll /s regsvr32 datime.dll /s regsvr32 dxtrans.dll /s regsvr32 dxtmsft.dll /s rem regsvr32 vgx. dll/ s regsvr32 WEBPOST.DLL /s regsvr32 WPWIZDLL.DLL /s regsvr32 POSTWPP.DLL /s regsvr32 CRSWPP.DLL /s regsvr32 FTPWPP.DLL /s regsvr32 FPWPP.DLL /s rem regsvr32 FLUPL.OCX /s regsvr32 w shom.ocx/s regsvr32 wshext.dll /s regsvr32 vbscript.dll /s regsvr32 scrrun.dll mstinit.exe /setup /s regsvr32 msnsspc.dll /SspcCreateSspiReg /s regsvr32 msapsspc.dll /SspcCreateSspiReg /s regsvr32 lic dll.dll /s regsvr32 regwizc.dll / s regsvr32 softpub.dll /s regsvr32 IEDKCS32. DLL /s regsvr32 MSTIME.DLL /s regsvr32 WINTRUST.DLL /s regsvr32 INITPKI.DLL /s regsvr32 DSSENH.DLL /s regsvr32 RSAENH.DLL /s regsvr32 CRYPTDLG.DLL /s regsvr32 Gpkcsp.dll /s regsvr 32 Sccbase.dll / s regsvr32 Slbcsp.dll /s

The second way to solve the “interface is not supported” problem in Windows 7 found on the Internet

1. Run the command line as Administrator. 2. Type CD\ and press enter. 3. Type DIR *.dll /s /b > regdll.bat and press enter (this is to copy all library paths to a file). 4. Enter notepad regdll.bat and press enter, notepad will open with this file. 5. B command line enter path and press enter, copy the current paths and save them to a file somewhere.

6. Enter path=c:\windows;c:\windows\Command;c:\windows\Program~\Accessories and press enter.

7. Check new paths by entering the command in step 5.

8. Enter and press enter, if the message “The system cannot find the specified path.” appears, then enter C:\WINDOWS\System\Regsvr32.exe /s C:\.

9. In the file opened in Notepad, replace all occurrences of C:\ with C:\WINDOWS\System32\Regsvr32.exe /s C:\ (C:\WINDOWS\System\Regsvr32.exe /s C:\). Save file. 10. At the command line, enter regdll.bat. Re-registration will start. It will be a long walk. In this case, the system can “think” for quite a long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system, also Regsvr32 *32). Errors may occur. Just click “Ok”.

11. After this, enter the value saved in step 5 on the command line.

Other publications:

artkiev.com

“Interface not supported”, how to get rid of it?

Hello friends. Several weeks have already passed since I updated to the new Windows 10. Well, what can I say, the new system is completely satisfactory for me so far, and in my opinion, it looks good visually. Even the recycle bin, which everyone dislikes so much, just because it is slightly similar to the recycle bin from Windows 98, does not cause any disgust.

But still, recently, I encountered the first problem on the new Windows 10. When I tried to launch any program, I started getting an error - “The interface is not supported.” But honestly, I have a suspicion that this error appeared due to the installation of one utility that I ran literally before this problem appeared. So, new system I didn't blame.

So, when I started looking for a way to fix the “Interface is not supported” error, the first thing I did was, of course, restart the computer, but this did not bring any results. Then, I decided that I should try to restore the system to an earlier state, but as it turned out, when I tried to start a system restore, this message was again displayed in front of me.

But due to the fact that I have a second account on my computer, I switched to it to check if such a problem was present there. After loading, I launched the browser, the normal page loading began, which means that here (on this account), Everything is fine. And the way everything works here, this means that by creating a new account the problem will disappear, but this solution to the “Interface is not supported” error did not work for me, since there is a lot of money on my profile various programs, in which a lot is stored important information for me. Therefore, I started looking on the Internet for tips and recommendations that could help me get rid of this problem.

Looking ahead, I will say that I succeeded, but at the same time, I tried a lot of different options, and only a few turned out to be really sensible. Therefore, now I will share with you some tips that really helped me get rid of the “Interface is not supported” error.

Fixing the "Interface not supported" error

1. The first method is the simplest and most convenient. This method is simple in that you only need to download the Fix file already prepared by Microsoft and install it on your computer. But the downside of this option is that this fix is ​​only compatible with Windows 7 and 8.1.

And since I updated to the new ten, I received a notification that this operating system is not supported, so I continued my search. (For those who have Windows 10, go straight to the second point, but if you have Windows 7, then read on).

Now, download the following archive, which contains the registry file. By running it, we will restore the association of exe files. Afterwards, as before, do not forget to restart the computer to apply all the changes.

Personally, for me, everything worked only after executing both files, but for many it was enough to just run the first batch file and reboot the computer. So try it, test it, and be sure to share your results in the comments.

3. And finally, the third option is to create a new user. If nothing helps you with the words described above and the “Interface is not supported” error still appears, then the one hundred percent solution is to create a new account.

To do this, right-click on the computer and select “Manage.”

In the window that opens, indicate the name of the new account and, if desired, a password. Also, do not forget to uncheck the “Require password change” checkbox and click “Create”.

That's all, after restarting the computer you can boot from the new account. After transferring the data, if you wish, you can remove it in the same “Users” menu, where, having selected an unnecessary account, delete it with the “DEL” key or using the “Delete” item.

These are the methods that seemed to me to really work. Be sure to try to do everything one by one and you will definitely get rid of the “Interface is not supported” error. In any case, if anything, leave a comment, and as always, I will try to figure it out and help solve your problem.

inforkomp.com.ua

Error: “Interface is not supported” in windows 7 (explorer.exe) » MS windows » Blog of useful articles about website development and promotion

After installing some programs (Photoshop, Illustartor and others), when trying to change the screen resolution by right-clicking on the desktop, the explorer.exe error “No such interface supported” appeared, the same thing happened in some other cases , for example, even when changing the icon on the “My Documents” icon. At the same time, some control panel items stopped working (including uninstalling programs). Some people stop running exe files, bat files, etc. The problem turned out to be in the libraries (dll). In order to eliminate it, you need to re-register all libraries or simply create a new user. But sometimes creating a new user is problematic in the sense that quite a lot of settings are stored on the current user windows systems 7.

You need to re-register the dll in the following way:

• Just in case, create a backup copy of the system.
• Run the command line with administrator rights (to do this, right-click on the desktop->create->shortcut, enter cmd in the field, then right-click on the shortcut->run as administrator).
• Type CD\ and press enter.
• Type DIR *.dll /s /b > regdll.bat and press enter (this is to copy all library paths to a file).
• Enter notepad regdll.bat and press enter, notepad will open with this file.
• In the command line, enter path and press enter, copy the current paths and save it somewhere to a file - we will need it in the last paragraph.
• Type path=c:\windows;c:\windows\Command;c:\windows\Program~\Accessories and press enter.
• Check new paths by entering command step 5.
• Enter C:\WINDOWS\System32\Regsvr32.exe /s C:\ and press enter, if the message “The system cannot find the specified path.” appears, then enter C:\WINDOWS\System\Regsvr32.exe /s C:\ .
• In the file opened in Notepad, replace all occurrences of C:\ with C:\WINDOWS\System32\Regsvr32.exe /s C:\ (C:\WINDOWS\System\Regsvr32.exe /s C:\). Save file.
• At the command line, enter regdll.bat. Re-registration will start. It will be a long walk. In this case, the system can “think” for quite a long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system, also Regsvr32 *32).
• After that, enter the previously saved value on the command line.

If errors occur during execution, skip them by clicking the “OK” button.

Other publications:

artkiev.com

FAQ #196. We answer your questions! - "Hacker"

Usually, when an error like this occurs, the problem turns out to be in the DLLs. To fix it, you need to re-register them all. To do this, you need to launch the command line as administrator and run there:

Cd\DIR *.dll /s /b > regdll.bat

This way we will copy all the paths to the libraries into the batch file. Now let's see what's in our path:

Save the output of the command to a text file and enter:

Path=c:\windows;c:\windows\Command;c:\windows\Program~\Accessories

After changing the paths we execute

C:\WINDOWS\System32\Regsvr32.exe /s C:\

If Windows complains “The system cannot find the specified path,” enter

C:\WINDOWS\System\Regsvr32.exe /s C:\.

Let's open our batch file in Notepad and replace all occurrences of C:\ in the file with

C:\WINDOWS\System32\Regsvr32.exe /s C:\

Save and run regdll.bat. Re-registration will take a long time, it may freeze, produce a mountain of errors, and in a very severe case, kill the Regsvr32 processes, and in a 64-bit system, also Regsvr32 *32. Once finished, enter path with your parameters that you previously saved. It also often happens that you can’t open the console or save the batch file, try loading into safe mode and launch processes through the task manager.

To do this, you can use a command like

In a similar way, you can do the opposite, that is, encode the string you need:

Echo "base64" | base64

As you can see, it’s nothing complicated, and by writing a simple wrapper in the same Python, you can do similar transformations even faster, without turning to various online decoders.

In principle - yes, there are such things, even a couple. For example, in MyScript Calculator you can draw a formula yourself, and, as the developer claims, after this the application begins to do its magic of converting symbols and numbers into digital text format and provides the result in real time. Supported operators include:

Basic math operations: +, -, x, ÷, +/-, 1/x Other operations: %, √, x!, |x| Exponentiations/Exponents: ℯx, xy, x2 Brackets: () Trigonometry: cos, sin, tan Inverse trigonometry: acos, asin, atan Logarithms: ln, log Constants: π, ℯ, phi

No less interesting is the PhotoMath application; it allows you to solve equations by simply pointing the camera at the formula. The developers are constantly improving things and increasing the functionality of the application, but don’t expect any special miracles. Especially if you’re in your second year of higher education or something worse.

To do this, just use a similar command:

Md5sum disk.iso

Or you can use the dd utility:

Dd if=/dev/cdrom | md5sum

When DVD recording additional action needs to be taken. This is due to the fact that when writing to DVD, service information is also written, so to check DVD disks with the dd utility you need to accurately specify the size and number of blocks. In order to find out how many significant blocks (extents) there are in the ISO image, run:

Echo $(($(ls -l disk.iso | awk "( print $5 )") / 2048))

The result will be the number of blocks, we will substitute this number in the dd command. Let's say we received 159381, then the command will look like this:

Dd if=/dev/cdrom bs=2048 count=159381 | md5sum

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\HwOrder\

We need to edit the ProviderOrder parameter:

WDNP32,SnacNp,RDPNP,LanmanWorkstation,webclient

Computer Policy\Computer Configuration\Administrative Templates\System\logon

We are interested in the setting

Always wait for the network at computer startup and logon

Set it to Enabled and reboot.

Personally, I really like WkHtml for these purposes, which is installed using the long-familiar commands:

Cd /opt wget http://downloads.sourceforge.net/project/wkhtmltopdf/0.12.1-dev/wkhtmltox-0.12.1-c22928d_linux-wheezy-amd64.tar.xz tar -xpJf wkhtmltox-0.12.1-c22928d_linux- wheezy-amd64.tar.xz rm wkhtmltox-0.12.1-c22928d_linux-wheezy-amd64.tar.xz

We launch it with the command

/opt/wkhtmltox-0.12.1-c22928d/bin/wkhtmltoimage --width 1000 --height 1000 --crop-w 1000 --crop-h 1000 --format png --quality 80 http://xakep.ru/ /tmp/snap/xakep.ru/WkHtml.png

Toolza is very convenient to use in different scripts - there are many different settings. If for some reason you don’t like this tool, here is a list of analogues:

• webscreenie;
• PhantomJs;
• Python-webkit2png.

Try installing BlueMan, it is in the repository:

Apt-get install blueman

If BlueMan flatly refuses to see the adapter, run in the console:

Apt-get install bluetooth echo "0000" >> /etc/bluetooth/pin /etc/init.d/bluetooth start hcitool scan

First, we install a module for working with Bluetooth, then we set a password for the connected devices, then we start the daemon, and all that remains is to scan for the presence of Bluetooth devices. After installing the module, you can control Bluetooth from the console or through the shell, whichever you prefer.

Try using Foreign Linux for these purposes - it is a dynamic binary translator and emulator that allows you to run unmodified binary Linux packages under Windows without using drivers or modifications, thereby implementing a completely different approach than Cygwin and other tools. On this moment The following tools are available in FLinux:

• basic utilities: Bash, Vim, nano;
• development environments: Python, GCC;
• package manager: pacman;
• games for the terminal: vitetris, nethack;
• utilities for working with the network: wget, cURL, SSH;
• X environment applications: xeyes, xclock, glxgears.

Personally, I use two tools for this purpose. The first one is remmina, installed from the repository, has many different plugins that can be delivered:

RDP, VNC, NX, XDMCP, SSH, Telepathy

It has a simple, unloaded interface and is very easy to manage. And the second is the forever young rdesktop, which only those living in a bunker have never heard of. The syntax is something like this:

Rdesktop -u user -r disk:home=/home/user -g 1280x975 -k en-us -d domain 192.168.0.1

Here, in addition to connecting to the remote desktop, we also connect to the home folder, which sometimes comes in handy at work. Some will say that this is inconvenient, but believe me, this is a matter of habit, aliases and scripts bound to hotkeys.

As analogues, I can offer the following packages:

• knoda;
• GNOME-DB;
• Berkley DB.

Also, if you need to open a database from a network resource and enter data into it or display reports on the screen plus use VBA, take a closer look at these solutions:

• MDB Tools;
• Linux MDB driver;
• Kexi.

The most must have, in my opinion, is “ The Web Application Hacker's Handbook: Discovering and Exploiting Security Flaws." In addition to the necessary basics, a methodology for testing a web application is described, which will give you a certain number of skills on the topic. But in general - keep links to the top hackbooks: one and two. They are partly repeated, but there are also differences. There are a lot of interesting things that should not only occupy your shelf, but also replenish your stock of knowledge.

Easily! To warm up and get started, you can look at the bWAPP project; it contains just a huge number of different bugs. Take a look yourself:

• SQL, HTML, iFrame, SSI, OS Command, XML, XPath, LDAP and SMTP injections
• Blind SQL and Blind OS Command injection
• Bash Shellshock (CGI) and Heartbleed vulnerability (OpenSSL)
• Cross-Site Scripting (XSS) and Cross-Site Tracing (XST)
• Cross-Site Request Forgery (CSRF)
• AJAX and Web Services vulnerabilities (JSON/XML/SOAP/WSDL)
• Malicious, unrestricted file uploads and backdoor files
• Authentication, authorization and session management issues
• Arbitrary file access and directory traversals
• Local and remote file inclusions (LFI/RFI)
• Configuration issues: Man-in-the-Middle, cross-domain policy files, information disclosures,…
• HTTP parameter pollution and HTTP response splitting
• Denial-of-Service (DoS) attacks: Slow HTTP and XML Entity Expansion
• Insecure distcc, FTP, NTP, Samba, SNMP, VNC, WebDAV configurations
• HTML5 ClickJacking, Cross-Origin Resource Sharing (CORS) and web storage issues
• Unvalidated redirects and forwards, and cookie poisoning
• Cookie poisoning and insecure cryptographic storage
• Server Side Request Forgery (SSRF)
• XML External Entity attacks (XXE)
• And much much much more…

The official website of the project describes what can be found there. I also strongly advise you to take a look, there is a whole selection of boot2root images for everyone.

To do this, you can use a syntax like this:

Tar -zxvf file.tar.gz --wildcards "file/bin" -C ./

Thus, we will unzip only the file/bin folder from the file.tar.gz archive into the current directory.

Is it possible to install a virtual machine on a server without a GUI?

Yes, for example, you can use QEMU. QEMU refers to programs that emulate a hardware environment. Its basic functions are similar to VMware, VirtualBox, Bochs or Virtual PC. Although some features are different. For example, two types of emulation are supported:

• Full system emulation - a full-fledged virtual machine is created, which has its own processor and various peripherals;
• User mode emulation - a mode supported only in Linux, allows you to run programs compiled for another platform on your native processor.

In the second option, QEMU takes care of translating processor instructions and converting system calls. In this mode, it is possible to emulate not only x86, but also processors of other architectures: ARM, SPARC, PowerPC, MIPS and m68k, which is pretty cool. QEMU is available in the Debian repository.

Sudo apt-get install qemu kqemu-common kqemu-source

Now we assemble the kqemu QEMU Accelerator Module. It allows you to execute part of the code directly on a real processor, bypassing the virtual one, thereby speeding up the work of the guest system. Thanks to it, the launch of a virtual OS increases significantly.

Sudo module-assistant prepare sudo module-assistant auto-install kqemu

Let's try to load the module:

Sudo modprobe kqemu lsmod | grep kqemu kqemu 124196 0

To avoid loading it manually in the future, add the kqemu line to /etc/modules. To launch itself virtual machine enough command

Qemu -hda test-disk -cdrom ubuntu-server.iso -m 512 -boot d -localtime

The possibilities of QEMU are almost limitless, and the documentation contains a huge number of pages of information; it is simply impossible to describe the entire process and all the subtleties. Therefore, if you are interested in this tool, I advise you to definitely try it and use it in your projects, since it is not as complicated as it seems at first glance.

How to transfer windows to an SSD and install Linux there while preserving partitions and data? In this case, other Windows partitions should be saved on the HDD and swap should be installed with /home.

1. According to the initial conditions, we have one HDD 1 TB, divided into three partitions (C: D: E:). You need to deliver an SSD disk and split it into three partitions. After the transfers you should get the following:
2. HDD, instead of drive C: there will be two partitions: /dev/sda1 -> /swap; /dev/sda2 -> /home; sections D: E: we do not touch.
3. SSD, /dev/sdb1 -> Win7 bootloader, which will subsequently be overwritten by grub; /dev/sdb2 -> C:; /dev/sdb3 -> / (Linux)
4. First, you need to make a backup of all important and critical data. If you wish, you can even remove a disk image, just to be sure, you can use Clonezilla for this, which was written about in the previous issue ][.
5. Now you can start transferring partitions. For these purposes, Acronis Disk Director is quite suitable for us. After launching and defining two HDDs and SDD, select the Windows bootloader (this is a 100 MB partition on sda) and select transfer the volume to the SSD. We do the same with the C: drive. After a reboot, our Windows should swear and not boot, which is logical. Don't be alarmed, insert the boot disk and let it restore the correct paths to the bootloader. The most important thing is not to go further until the system starts normally.
6. After there are no problems loading Windows, we move on. Let's start installing Linux. We need to put /swap at the beginning hard drive sda, then put everything that remains from the former C: drive under /home, and put everything else on the SSD and install grub on it.
7. After the reboot, you should get the desired map that you planned. Two operating systems, split on two disks. This gives a good increase in the performance of both operating systems, but also adds some inconvenience due to the fact that data cannot be lost and such experiments have to be carried out on a combat vehicle. If possible, I advise you to practice “on cats” or at least on virtual machines before starting.

SSD or HDD in a laptop for daily work?

A. An SSD will give a significant increase in speed compared to a regular HDD, plus if you use the so-called server SSDs, designed for a larger number of rewrite cycles, you can achieve very good indicators in terms of hours between failures. Plus quiet operation and lighter weight of the laptop.

How to remove grub and restore windows 7 bootloader

Well, what can I say, so far I am completely satisfied with the new system, and in my opinion, it looks good visually. Even the recycle bin, which everyone dislikes so much, only because it is slightly similar to the recycle bin from Windows 98, does not cause any disgust.

But still, recently, I encountered the first problem on new Windows 10. When I tried to launch any program, I started getting an error - “”. But to be honest, I have a suspicion that this error appeared due to the installation of one utility that I ran literally before this problem appeared. So, I didn’t blame the new system.

So, when I started looking for a way to fix the “Interface is not supported” error, the first thing I did was, of course, restart the computer, but this did not bring any results. Then, I decided that I should try to restore the system to an earlier state, but as it turned out, when I tried to start a system restore, this message was again displayed in front of me.

But due to the fact that I have a second account on my computer, I switched to it to check if such a problem was present there. After loading, I launched the browser, the normal page loading began, which means that here ( on this account), Everything is fine. And the way everything works here, this means that by creating a new account the problem will disappear, but this solution to the “Interface is not supported” error did not work for me, since my profile has a lot of different programs in which a lot of important information is stored. information for me. Therefore, I started looking on the Internet for tips and recommendations that could help me get rid of this problem.

Looking ahead, I will say that I succeeded, but at the same time, I tried a lot of different options, and only a few turned out to be really sensible. Therefore, now I will share with you some tips that really helped me get rid of the “Interface is not supported” error.

Fixing the "Interface not supported" error

1. The first method is the simplest and most convenient. This method is simple in that you only need to download the Fix file already prepared by Microsoft and install it on your computer. But the downside of this option is that this fix is ​​only compatible with Windows 7 and 8.1.

And just like me, I received a notification that this operating system is not supported, so I continued my search. ( For those who have Windows 10, go straight to the second point, but if you have seven then read on).

Here is the link to download this file. All you have to do is install it and restart your computer when finished.

Download the archive from this link to any folder on your computer and unpack it. Next, run the file “ interfacenotsupportedfix.bat", We wait for the process to complete and restart the computer.

Now, download the following archive, which contains the registry file. By running it, we will restore the association of exe files. Afterwards, as before, do not forget to restart the computer to apply all the changes.

Personally, for me, everything worked only after executing both files, but for many it was enough to just run the first batch file and reboot the computer. So try it, test it, and be sure to share your results in the comments.

3. And finally, the third option is to create a new user. If nothing helps you with the words described above and the “Interface is not supported” error still appears, then the one hundred percent solution is to create a new account.

To do this, right-click on the computer and select “”.

In the window that opens, indicate the name of the new account and, if desired, a password. Also, don’t forget to uncheck the “ Require password change", and click "Create".

That's all, after restarting the computer you can boot from the new account. After transferring the data, if you wish, you can remove it in the same “Users” menu, where, having selected an unnecessary account, delete it with the “DEL” key or using the “Delete” item.

These are the methods that seemed to me to really work. Be sure to try to do everything one by one and you will definitely get rid of the “” error. In any case, if anything, leave a comment, and as always, I will try to figure it out and help solve your problem.

“Interface not supported”, how to get rid of it?

When installing programs that can be launched from the contextual Windows menu, an error occurs - 2147467262 The interface is not supported. You can find out how to fix it in this article. This problem can appear on all versions of Windows OS. But more often it occurs on Windows 7. Will be used different methods elimination. If one doesn't work, use another.

Reasons for the error in Windows

Error 2147467262 may be caused by system file failures during software installation. In this case, violations could already be in the system before the programs were installed. A message appears when the user tries to use context menu(by pressing the right mouse button (RMB)). These OS symptoms may indicate the presence of viruses on the computer, which often damage system files.

Error 2147467262 in Windows - what to do

First, try simple steps that can solve most temporary system glitches. First of all, restart your computer and try to trigger the “Interface not supported” error. The following step may help determine which program is causing the error. We need to try to boot into a “clean” Windows. To do this, follow these recommendations:

Restart your computer and try again to trigger the error. If it appears, then system services have nothing to do with it. But if the system message no longer appears, you can determine which service is calling it. To do this, you need to check one box on the service one by one and restart your PC. To speed up the process of finding a causal service, you can select not one, but several services at once. The main thing is to remember the group in order to later identify the non-working one from this group.

In the “Startup” tab, select each application that starts with Windows and click the “Turn off” button at the bottom. When logging into the system using the clean boot method, they also need to be enabled one by one to determine the cause of error 2147467262. Once you identify the service, you can temporarily disable it. Then find out how you can troubleshoot problems with this service. Also try reinstalling or uninstalling the program that you installed on your working operating system.

Recovering system files

If the previous method did not help resolve the error, let's try to restore all possible failures in system files. Windows has its own utilities for this. You will need a stable internet connection as the utilities will need access to the Microsoft server to download damaged files. Follow these instructions:

If this method also did not help, like the previous one, try restoring the system using a bootable Windows disk. The DVD from which you installed the system. To boot from the disk, you will again need to set the boot options from disk drive in BIOS. The following steps are similar to installation. Only when selecting actions you need to specify “System Restore” instead of installation. Next, follow the wizard's instructions.

Windows Fix Utility

Previously, a utility from the creators of Windows was available on the official Microsoft website. It allowed you to fix many problems on your computer and was called Windows Fix It. The developers of the utility implemented its functions differently. It has not been available at the download address for a long time. IN latest versions Windows developers have appropriated the capabilities of a once-existing utility in the OS's built-in Troubleshooter. IN earlier versions this item was never considered effective by users. But today, by running Troubleshoot on Windows 8.1, 10, the wizard really becomes useful.

A group of programmers developed another unofficial version of this utility. You can download it at https://windowsfix.ru/. Since the developer is unknown, check the utility for viruses before launching and installing. There is another utility for Windows 10 that also solves many errors and crashes. You can download it at http://www.softportal.com/get-42386-fixwin.html. It doesn't need to be installed, it's portable program. Only required to start executable file. For computer security purposes, the utility also needs to be checked for viruses.

If we are talking about unofficial solution methods, try downloading and running the utility from this forum - http://delphidevelop.ru/forum/29-312-1/. The link is in the first post. Everyone who tried it claims that the error was eliminated.

Other ways to solve the error

If error code 2147467262 appears and you cannot open folders on your computer, try creating a new account. It will not help solve the error on the administrator account, but you will have access to files that can be transferred to another disk, flash drive, or to the cloud.

1. If the user does not have access to the standard Start or Control Panel window, press WIN+R together and enter “netplwiz”. Press ENTER;
2. Click the “Add” button and create a new user, assigning the necessary parameters;
3. Restart your computer and select a new account.

Once you are logged in, try opening the folders where important data is located and transfer it. By saving copies of the files, you can try to restore or reinstall the system.

There is another way that can solve error 2147467262 - interface is not supported. It involves re-registering dynamic link library (dll) files. To use it, you need to enter a large number of commands sequentially. In terms of complexity, it is comparable to reinstalling Windows.

An error appeared on some computers: explorer.exe "interface not supported". Not rolling back the restore point, not updating did not give positive results. After the error occurred, the system began to behave horribly: programs stopped working (exe simply did not execute), Explorer did not open - in general, it was not possible to debug and find out the reason

The problem was with the dll libraries. There are several solutions. On one computer one thing will help, on another - another:

The first solution to the "interface is not supported" problem in Windows 7

Create .bat. Run it as Administrator and then restart your computer:

Regsvr32 comcat.dll /s regsvr32 CSSEQCHK.DLL /s regsvr32 shdoc401.dll /s regsvr32 shdoc401.dll /i /s regsvr32 asctrls.ocx /s regsvr32 oleaut32.dll /s regsvr32 shdocvw.dll /I /s regs vr32 shdocvw.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /I /s regsvr32 msrating.dll /s regsvr32 mlang.dll /s regsvr32 hlink.dll /s rem regsvr32 mshtml.dll /s regsvr32 mshtmled. dll /s regsvr32 urlmon.dll /s regsvr32 plugin.ocx /s regsvr32 sendmail.dll /s rem regsvr32 comctl32.dll /i /s rem regsvr32 inetcpl.cpl /i /s rem regsvr32 mshtml.dll /i /s regsvr32 scrobj .dll /s regsvr32 mmefxe.ocx /s rem regsvr32 proctexe.ocx mshta.exe /register /s regsvr32 corpol.dll /s regsvr32 jscript.dll /s regsvr32 msxml.dll /s regsvr32 imgutil.dll /s regsvr32 thumbvw.dll /s regsvr32 cryptext.dll /s regsvr32 rsabase.dll /s rem regsvr32 triedit.dll /s rem regsvr32 dhtmled.ocx /s regsvr32 inseng.dll /s regsvr32 iesetup.dll /i /s rem regsvr32 hmmapi.dll /s regsvr3 2 Cryptdlg.dll /s Regsvr32 ActXPRXY.DLL /S Reggr32 Dispex.dll /S REGSVR32 OCCACHE.DLL /S Regsvr32 OCCACHE.DLL /I /S Regsvr32 IEPEERS.DLL /S RAMSVR32 Winin et.dll /i /s Regsvr32 urlmon.dll /i /s rem regsvr32 digest.dll /i /s regsvr32 cdfview.dll /s regsvr32 webcheck.dll /s regsvr32 mobsync.dll /s regsvr32 pngfilt.dll /s regsvr32 licmgr10.dll /s regsvr32 icmfilter.dll /s regsvr32 hhctrl.ocx /s regsvr32 inetcfg.dll /s rem regsvr32 trialoc.dll /s regsvr32 tdc.ocx /s regsvr32 MSR2C.DLL /s regsvr32 msident.dll /s regsvr32 msieftp.dll /s regsvr32 xmsconf.ocx /s reg svr32 ils .dll /s regsvr32 msoeacct.dll /s rem regsvr32 wab32.dll /s rem regsvr32 wabimp.dll /s rem regsvr32 wabfind.dll /s rem regsvr32 oemiglib.dll /s rem regsvr32 directdb.dll /s regsvr32 inetcomm. dll/ s rem regsvr32 msoe.dll /s rem regsvr32 oeimport.dll /s regsvr32 msdxm.ocx /s regsvr32 dxmasf.dll /s rem regsvr32 laprxy.dll /s regsvr32 l3codecx.ax /s regsvr32 acelpdec.ax /s regsv r32 mpg4ds32.ax /s regsvr32 voxmsdec.ax /s regsvr32 danim.dll /s regsvr32 Daxctle.ocx /s regsvr32 lmrt.dll /s regsvr32 datime.dll /s regsvr32 dxtrans.dll /s regsvr32 dxtmsft.dll /s rem regsvr32 vgx. dll/ s regsvr32 WEBPOST.DLL /s regsvr32 WPWIZDLL.DLL /s regsvr32 POSTWPP.DLL /s regsvr32 CRSWPP.DLL /s regsvr32 FTPWPP.DLL /s regsvr32 FPWPP.DLL /s rem regsvr32 FLUPL.OCX /s regsvr32 w shom.ocx/s regsvr32 wshext.dll /s regsvr32 vbscript.dll /s regsvr32 scrrun.dll mstinit.exe /setup /s regsvr32 msnsspc.dll /SspcCreateSspiReg /s regsvr32 msapsspc.dll /SspcCreateSspiReg /s regsvr32 lic dll.dll /s regsvr32 regwizc.dll / s regsvr32 softpub.dll /s regsvr32 IEDKCS32. DLL /s regsvr32 MSTIME.DLL /s regsvr32 WINTRUST.DLL /s regsvr32 INITPKI.DLL /s regsvr32 DSSENH.DLL /s regsvr32 RSAENH.DLL /s regsvr32 CRYPTDLG.DLL /s regsvr32 Gpkcsp.dll /s regsvr 32 Sccbase.dll / s regsvr32 Slbcsp.dll /s

The second way to solve the “interface is not supported” problem in Windows 7 found on the Internet

1. Run the command line as Administrator.
2. Type CD\ and press enter.
3. Type DIR *.dll /s /b > regdll.bat and press enter (this is to copy all library paths to a file).
4. Enter notepad regdll.bat and press enter, notepad will open with this file.
5. In the command line, enter path and press enter, copy the current paths and save them to a file somewhere.
6. Enter path=c:\windows;c:\windows\Command;c:\Windows\Program~\Accessories and press enter.
7. Check new paths by entering the command in step 5.
8. Enter C:\WINDOWS\System32\Regsvr32.exe /s C:\ and press enter, if the message “The system cannot find the specified path.” appears, then enter C:\WINDOWS\System\Regsvr32.exe /s C :\.
9. In the file opened in Notepad, replace all occurrences of C:\ with C:\WINDOWS\System32\Regsvr32.exe /s C:\ (C:\WINDOWS\System\Regsvr32.exe /s C:\) . Save file.
10. At the command line, enter regdll.bat. Re-registration will start. It will be a long walk. In this case, the system can “think” for quite a long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system, also Regsvr32 *32).
Errors may occur. Just click “Ok”.
11. After this, enter the value saved in step 5 on the command line.

Typically caused by incorrectly configured system settings or irregular entries in Windows registry. This error can be fixed with a special software, which restores the registry and configures system settings to restore stability

If you have an EXE error. This interface is not supported. then we strongly recommend that you Download (EXE error. This interface is not supported.) Repair Tool .

This article contains information that shows you how to fix EXE error. No such interface supported.