Zte blade phone won't turn on. ZTE phone won't turn on, what should I do? How to reboot a frozen phone even with a non-removable battery. Restoring dead ZTE phones that won't turn on at home

Flashing a phone is always a risky business. It would seem that even if you follow everything strictly according to the instructions, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a working phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

Firstly, the phone should always be charged more than 50%. Secondly, before installing the firmware you must do backup data (Backup). In this case, you can return the phone to the initial state. Having found on a reputable forum instructions for any firmware that pioneers have already successfully flashed, you should not neglect these points, unless, of course, you are a guru in unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in a forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule can be considered personal attentiveness and strict adherence to instructions.

Even if after flashing your ZTE V880E does not turn on at all, and it has become clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a “dead” device.

Recovery instructions for ZTE V880E

• If the phone is still working and the radio module has not been backed up, then be sure to do Backup QPST. How to do this is described. If the ZTE V880E does not turn on and Backup was not done, then the IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack into any folders. We also download Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume “+” and “-” and insert the cable, without releasing the volume, press “on”. DFU mode is loading. The phone is detected as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The checkbox on the right side is not selected. Click left button at the bottom. After the process is completed, the smartphone will enter FTM mode on its own. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English language(gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). For those who don’t have it, skip this point.

Instructions: What to do if ZTE Blade X3 does not turn on? The cause of the malfunction can be either mechanical damage or incorrect operation. operating system. Often in requests search engines the question arises: why did the ZTE Blade X3 go out and stop turning on? instructions and do-it-yourself repairs. The causes of the malfunction are:

1. Increased load on the battery. With constant use of various applications and regular switching on Wi-Fi smartphone consumes a large amount of energy, which causes instant shutdown. Check the condition of the battery and replace the battery if necessary.
2. Faulty charging device. Perhaps a wire or contact on the charger has come loose. It happens that the charger overheats too much, as a result of which the battery does not receive the necessary energy and, despite the indicator being 100%, the phone is charged no more than 20%. You should not use someone else's charger (especially if the device Bad quality). This can have a detrimental effect on the condition of the phone and it will soon fail.
3. The phone does not work after the updates are completed. The smartphone regularly undergoes new updates. Installing some of them may make the device unsafe. Problems arise after completion: the phone turns off and then turns on on its own (this happens regularly).

Troubleshooting the operating system and solving mechanical problems is best left to the experienced specialists of the Telemama service center. Do-it-yourself repairs can lead to additional problems, but professionals can restore your smartphone in a matter of hours.

Price:

Our advantages

Ordering phone repair services from the Telemama service center is profitable because we:

1. We perform free diagnostics, with the help of which we determine the exact cause of the malfunction.
2. When repairing, we use only original parts from the manufacturer ZTE Blade X3. We cooperate directly with all manufacturers, so we offer spare parts at low prices.
3. We carry out work at competitive prices.
4. We provide warranties on spare parts and service for up to one year.

The Telemama service center offers its customers high-quality repair services for smartphones of any complexity. Thanks to the professionalism of our craftsmen, the work is completed within a strictly specified time frame. When repairing, we use only genuine parts from the manufacturer of the same name, which ensures long-term operation of the smartphone. There is a flexible discount system for regular customers; we also provide a guarantee for all types of services.

4 years ago

Hi all. Today I would like to look at all the most common reasons why an Android smartphone may not turn on. I will not touch on situations where disassembling the phone and interfering with the electronics is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly stops turning on, you don’t have to immediately run to a service center or workshop and have it repaired. Most likely, there is a chance that you can do it on your own and save some money (programs for home accounting on Android will also help you save money, look for them on the blog). Below we will look at the main measures that can be taken if your Android smartphone or tablet does not turn on. So, let's get started.

Android phone won't turn on. 5 ways to solve the problem.

Method No. 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole problem turns out to be a dead battery. And I understand perfectly well when they tell me that they’ve been charging their smartphone all day, but it still won’t turn on. Some devices have one unpleasant feature - if you discharge the battery too much, it will not charge, even if you keep it on charge all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then you insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old cell phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not connected to the outlet at this time.

We fix the exposed wires to the battery with tape for a few minutes.

Important. Do not reverse the polarity.

Method No. 2

Faulty charging. Of course, the second thing to check is the serviceability of the charger. Everything is simple here - we take a known working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds banal, it helps every fifth person.

Method No. 3

If the phone does not turn on, then perhaps it is simply frozen. To revive your device, we’ll use a long-known but still relevant method - remove the battery and reinsert it.

Unfortunately, this technique does not work on many modern phones with non-removable batteries. In this case, to reboot you need to find the reset button and press it, for example with a paper clip. It can be anywhere, but, as a rule, it is located near the SIM card slot or on the back of the smartphone or tablet. Near the reset button there is sometimes a message reset or off. The photo below is an example of the location of such a button in a smartphone.

Method No. 4

This method is applicable if your phone not only does not turn on, but does not turn on completely. For example, it gets stuck on your Android logo and nothing else happens. This happens due to a glitch in the smartphone software. Then a hard reset will help us ( hard reset) or, translated, hard reset. It is done differently for each device model. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future I hope to create a separate section on this topic on the blog.

Unfortunately, not all smartphones support hard reset; it depends on the recovery installed in the device. If you are interested in learning more about what it is, search the Internet.

For example, this function is not available by default in many Sony phones, but the manufacturer has provided the ability to restore the software using special utility Sony pc companion.

Method No. 5

Not often, but it still happens that smartphone won't turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to use tweezers or a small screwdriver to bend the contacts to improve the connection to the battery. The main thing here is to avoid fanaticism, otherwise you will only make things worse.

If none of the methods helped and your phone still won’t turn on, then the problem most likely lies in the hardware itself and only a service center can help you.

Sincerely, Ivan Derbenev.

Now let’s figure out why your Android phone doesn’t load beyond the logo (it doesn’t turn on after the manufacturer’s or robot’s splash screen). Further in the text: first about the reasons and then a deciphering of what to do in this or that case.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

If we divide all the reasons why your Android phone hangs on the logo screensaver and does not load further, then this will be

• errors in software(possibly eliminated yourself);
• problems with hardware (only in the service center).

Causes of failure and why it turns on but does not boot

⭐️⭐️⭐️⭐️⭐️ If Android does not load on your phone or tablet when you turn it on, or your Android smartphone starts but does not go beyond the logo splash screen, then the reasons for this may be the following:

• Errors when flashing the device. These include installing an inappropriate or damaged assembly, out-of-order firmware, power failure, and other factors.
• Lack of memory. The system may not start due to lack of memory. The solution may be to delete unnecessary data.
• Incompatible with memory card. If your smartphone turns on but does not boot completely, try removing the memory card and trying to restart the system.
• Hardware problems that occur after impact, fall, liquid ingress, or exposure to extreme temperatures.
• Damage to the power button or its cable, which “shorts” the phone and it goes into a cyclic reboot, loading up to the logo and then in a circle. We encounter this from time to time and can only be diagnosed at a service center.

Before you try to troubleshoot Android, you need to understand why the system won't boot.

Restoring functionality

If the phone shows that the charge is coming, then the causes of the problem must be looked for in the operation of Launcher Android. If your device vibrates or its screen flickers, there is a possibility that the screen is damaged.

If you determine that the problem is software in nature (for example, the problem arose after a firmware update), then a simple reboot will not help. The system must be reset via Recovery Mode or reflash the device. Let's see what to do:

1. While holding down the power button and the volume down key (there may be other combinations, look for your model), go to Recovery Mode. If the phone is , then the problems are at a deeper level, so you need to contact a service center.
2. Perform a factory reset by selecting “Wipe data factory”.
3. Select "Reset" to reboot the device.

This will delete the user's personal data and settings. If this method does not help, perform a flashing. To do this, upload the file with the appropriate firmware to the root of the memory card, insert the drive into the phone and select “Install zip from sdcard” in Recovery Mode.

Increase

WITH software glitch You can do it yourself, but how to fix hardware problems? The most reasonable option is to contact a service center for diagnostics and repairs.

Extracting information from a broken Android

Even if the problem can be solved without financial investment, by simply flashing it, users have an important question - how to save the data stored in the phone’s memory. There are no problems with the memory card: you just need to remove it from the device. But how to save data from the internal drive? For example, pull out contacts.

If you did backup copy system or at least, then it will be very easy to get contacts. All you have to do is go to the Contacts app on the Google website to see full list synchronized contacts. If you want to transfer them to another device, all you need to do is add a Google account to it.

Telephone – despite the continuously evolving information system, these small funds for telephone communication continue to remain at the peak of their popularity. Thousands of residents cannot imagine how their life would change, what direction it would turn in, if they did not have this small but irreplaceable assistant at their disposal, like a telephone or smartphone. Many will agree that this is not even a communication device, but an extension of the hand, whose malfunction can cause serious discomfort. Many people cannot afford to be left without a phone for a minute. What if at exactly this second the device receives important message or a call that will radically change the course of events in the life of the owner of the phone. And extreme panic can begin the second the owner of the smartphone realizes that there are some problems with the device. It’s okay if the music file doesn’t open, or the pictures on your phone have become more blurry and inaccurate. But what if the phone turns off and then doesn’t turn on at all? What to do in such a situation? Start ringing the bells and turn on all your friends who may also have had this situation, or find an experienced specialist who can correctly understand the “whims” of the phone and return its owner to the usual rhythm of life as quickly as possible. After all, some people have absolutely no idea how they can sleep, watch TV, or go to an important meeting without such a faithful telephone, which is already integral to the human essence. It’s good if the phone has faithfully served its owner for many years and he can afford to be capricious, but if a failure occurs in a brand new smartphone, then the nerves and peace of mind of the smartphone owner are in big question.

Don't harm yourself!
The first thing to do if your phone turns off and won’t turn back on is not to panic. At such moments, there is a high probability of taking actions that will further aggravate the situation.
What do almost everyone whose smartphone won’t turn on do? Everyone opens the cover of the phone and begins to look and find out what is going on with the phone? What part could fail? And to clarify these questions, everyone starts pulling wires and nuts. You shouldn’t do this if you want to leave even the slightest chance of restoring your phone. The fact is that a person who is not familiar with the secrets of a smartphone is unlikely to be able to independently find the cause of the breakdown. It may be a small thing, but excessive curiosity quickly turns a minor problem into a bigger nuisance. Who knows, maybe the only reason is that the battery suddenly ran out and the device itself just needs to be charged. Experts identify a number of reasons that can lead to such a problem as the phone not turning on. Let's talk about this.
1. Check the battery.
Just a couple of minutes ago, the phone was working correctly, and there was no sign of trouble to come; this is how those smartphone owners who have already encountered this problem can characterize the situation.
The charger on the phone showed an almost full battery, so you could forget about recharging the device for the whole day. However, it is worth considering the fact that modern mobile devices, equipped with Wi-Fi or Bluetooth options can consume many times more energy. The thing is that the phone is in constant search a new accessible network that would allow the owner to access the Internet. This uses a lot of battery energy. Of course, these functions are indispensable for the modern user, but you can turn them off and turn them on only in those moments when this service is needed. Otherwise, the phone's battery is discharged in a matter of seconds, and is completely impossible to manipulate, which would allow the phone to turn on again. In this situation, the only thing that can solve the problem is to put the phone on charge! In some cases, the battery will only need half an hour before it can return the phone to working condition, and some smartphones take about a day to charge and only then turn on again. It all depends on the condition of the battery itself.
2. Check your charger!
If the smartphone does not turn on again, even after being charged for more than a day, then in this case it is necessary to inspect the charger itself. Who knows, maybe some wire in it has become disconnected, or some contact has come loose? The problem may also lie in the phone socket. Indeed, in modern devices it has only one hole, which performs many functions - charging, headphones, connecting to a computer, etc. The only option to check the functionality of the charger is to charge the phone using a frog battery. If your phone starts working fine, get a new charger.
Other people's chargers can also damage your phone. Many cases have been identified where expensive mobile devices have become unusable due to contact with strangers that are not suitable for their type. chargers. This can lead to a more serious problem, which can only be resolved by flashing the smartphone.
3. On/off button
Another reason that may explain why the phone does not turn on is a malfunction of the button responsible for turning the mobile device on and off. There could be a lot of reasons for this. In the case of a new device, all responsibility lies with the manufacturing company, which could have made a mistake and a defect occurred during production, leading to the inoperability of the button. The owner must contact directly the store where he purchased his device. There they may offer him new phone, or they will suggest contacting a service center, where they will try to find out the cause of the breakdown and try to fix it.
In the case of an older model, when you can be more confident about the condition of the buttons, such unpleasant incidents can also happen. It only very often happens that if one button fails, then the entire keyboard may not work. A number of cases can lead to this: the phone was dropped, which caused the keyboard to move, or moisture got into the device, which has a more detrimental effect on the device. Regardless of the reason, you need to contact a specialist who can identify the cause of the button’s inability. You may be offered several options in the future:
replace the keyboard panel;
perform a complete cleaning of the mobile device;
partially or completely replace the keyboard controller.
Even the most ordinary flash drive can be the reason why your phone is not working. In many cases, mobile devices are released without a memory card and the buyer must purchase additional memory for his device. Often the selected model and manufacturer turns out to be incompatible with the telephone device. You should buy flash drives only in trusted stores that sell original products from reputable manufacturers. It is also necessary to check the compatibility of these two systems in the store. Place the flash drive in your phone and try to turn it on. If the phone immediately begins to freeze or does not see the device itself at all, then you can safely return the selected flash drive to the seller. If the smartphone refuses to work with any type of flash drive, even with minimal memory, then you will have to contact a service center where they will flash the device.
4. Installing updates.
Who doesn't love downloading new updates to their phone? Especially if you have full access to the Internet, and there is certainly something interesting to download to your device. But not all updates can benefit a smartphone; some updates are incompatible with system features mobile phone, which leads to device failures. If this is the case, then the phone immediately begins to send signals that the new application is not in contact with the phone. The device just starts to glitch. Inscriptions are periodically displayed on the monitor, the phone can turn on and off on its own. What should you do in this situation? Turn off the phone, remove the battery, wait a couple of minutes, then turn it on again and quickly delete new applications and settings that have been made recently. Even if you did everything correctly, the device will take time to return to its previous functionality.
If the phone is not restored, then you will have to take more serious measures to wipe the phone - a function that removes all phone settings and returns the previous factory settings. This function does not affect the content of the SIM and memory card, and everything else is updated.
5.The cause of the problem may be mechanical damage.
When presenting a new smartphone model, every manufacturer praises their products, but modern phones shouldn’t be called invulnerable either. Many people often put their phone in the back pocket of their jeans. It’s worth bending down or sitting down, the phone will fall and may break. It’s good if the phone just doesn’t turn on yet, but this can still cause a lot of troubles that will have to be addressed to a service center.
At first glance, smartphone owners do not find any damage to the device and cannot themselves explain why their phone failed. Maybe you lent your phone to someone, but it was dropped and they didn’t tell you? Anything can happen. It may even be that the co-owner of the phone did not notice how he sat down and damaged his smartphone.
First you need to restart the phone, remove the battery, put it back in place and try to turn on the phone. If these measures do not lead to the desired result, the phone does not turn on, then you need to urgently contact a specialist; perhaps the contact has come loose and the phone can be easily repaired. In many cases, the service center offers to reflash the phone, arguing that this is the only way restore your phone. In some cases this is true. There is no need to be afraid of flashing the firmware; the device will work as before, maybe even better.