Firmware for Samsung Galaxy S6 Edge SM-G925F. Firmware for a copy of Samsung Galaxy S6 g920f Copy of Samsung galaxy s6 w3bsit3-dns.com
Instructions for flashing the SM-G920F smartphone to the new official firmware, as well as getting Root superuser rights to Galaxy phone S6 SM-G920F.
Before you start flashing the firmware for your Samsung SM-G920F phone, you first need to download necessary programs and files to your PC.
1. Download the firmware program - (this program is used in official Samsung services).
2. Drivers for connecting your smartphone with your PC - Drivers for Samsung Galaxy S6
3. Then download the firmware you like for Samsung smartphone Galaxy S6 SM-G920F for example one of these:
4. Unpack the Odin flasher program and firmware into any folder (it’s most convenient for me on the desktop).
Note: Sometimes Odin gives FAIL! due to the presence of Cyrillic (Russian letters) on the path to the firmware (For example, C:\Users\Name\, etc.).
5. Launch the program Odin as administrator (right click on the icon - run as administrator - Yes).
Note: Usually, when you simply open Odin, you are automatically asked for permission to run as administrator.
6. After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the field "BL"
The AP……….tar.md5 file is inserted into the field "AP"
The file CP……….tar.md5 is inserted into the field "CP"
The CSC file……..tar.md5 is inserted into the field "CSC"
7. We switch the phone to firmware mode (To do this, in the off state, press and hold the buttons Volume down + Home + Power and after the menu with a yellow triangle appears, press the button Volume up which actually confirms the desire to enter the smartphone’s firmware mode Samsung Galaxy S6 SM-G920F.
8. Connect the SGS 6 smartphone to the PC, in Odin program should recognize the phone (in the upper left corner the ID: Com inscription will light up in blue), after which you can safely press the button Start. Process Samsung firmware The Galaxy S6 is running, you can monitor the progress of the firmware in the log window, flashing the smartphone lasts from 3 to 15 minutes, it all depends on the power of your PC. Once the firmware is completed, the phone will reboot on its own.
Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try others USB ports or change the USB cable.
For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of different functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.
Smartphones running operating system Android has long filled the whole world with its diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem simple reset Resetting to factory settings may not be enough - you need to flash the Samsung Galaxy S6 Edge SM-G925F.
Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S6 Edge SM-G925F.
What do we need?
- Device charged at least 50% (if possible).
- Original USB cable.
- latest version.
- Latest firmware:
If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.
Samsung Galaxy Core Prime SM-G360H firmware process
- If Kies was installed on your computer, remove it.
- Download and install for Samsung smartphones and tablets.
- Download and install.
- Reboot the computer.
- Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.
- On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number"), turn on " USB Debugging" And “Unlock. predetermined production.".
- We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
- After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.
- The phone has entered download mode.
- Let's launch Odin on behalf of the administrator.
- In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy S6 Edge SM-G925F. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.
Files that can be found in the archive with the firmware
The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.
If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.
- In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.
- This is what the program window looks like ready for firmware:
- Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.
- Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.
Instructions for installing the official single-file firmware on the Samsung Galaxy S6 (SM-G920x).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy S6 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.
Installation instructions
Download and install drivers for your phone.
ATTENTION!
If the program is already installed Samsung Kies, no need to install drivers. You just need to completely unload Kies from memory through the task manager, and then continue.
Disable the option " Activation Lock» in the device security settings.
If the smartphone data was encrypted, it needs to be decrypted.
Download and unpack the archive with the program into a random folder.
It is important that the path to the folder does not contain Cyrillic. For example, "C:\S6FW\".
Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.
Reset your device.
To do this, go to the settings tab " Accounts
" to the section " Archive and reset", select the item " Reset device" and press the button " Delete everything" The phone will reboot.
Run Odin PC as administrator.
Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down, Home and Power keys. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. In Odin the message “ COM».
Click on the “ AP» and select the TAR firmware archive.
Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.
Click on the “ Start" The firmware installation process will begin.
At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.
Regardless of which smartphone you choose - Galaxy S6 or Galaxy S6 Edge, in any case you get the same TouchWiz interface, which this time has become a little simpler and lighter. However, this does not mean that you should not pay attention to custom firmware. On the contrary, third-party Android ROM builds tend to offer better performance and better battery life. And let's be honest, the Galaxy S6 and Galaxy S6 Edge are just missing a bigger battery. Enough time has now passed for developers to release stable builds for the Galaxy S6 and Galaxy S6 Edge.
Unfortunately, there are still some problems. This is due to the fact that Samsung used a new proprietary Exynos processor in the new flagships, and for custom firmware this is problematic. On the other hand, there are still craftsmen who are not deterred by this, and you are offered several firmware options indicating the model numbers of smartphones on which you can install the assembly.
As always, you should think twice before installing third party firmware to a smartphone. Always follow the instructions and be careful, because you will have to address all claims in the future only to yourself.
XtreStoLite Deodexed Mod Edition 1.2
Available for SM-G920F / SM-G920I / SM-G920T
The firmware is quite small in size (467 MB) and is a fairly lightweight version of the firmware with TouchWiz for the Galaxy S6. XtreStoLite offers all the most popular TouchWiz features. The assembly is assembled from the stock G920I DVU1AOE3 Lollipop 5.0.2, but the stock “weighs” almost 1.5 GB and does not have all the features, settings, and mod support that XtreStoLite has. There are 5 options in the reboot menu, a new SuperSU and Busybox built into the firmware, the absence of Knox, recording phone calls, numerous interface settings and many other improvements. Moreover, some problems stock firmware solved here - system memory will not overflow and applications will not be forcibly closed.
This firmware has a lot of new features on top of the stock TouchWiz. For example, the assembly received new firmware modem (XXU1AOE3), supports Edge Contacts (which is in the Galaxy S6 Edge), allows you to change the status bar, adjust the backlight duration, easily switch between user accounts, there are many new settings for the stock launcher, network speed is indicated in the status bar and much more. This build isn't that small compared to the others, but it's worth a look.
AllianceROM
Available for SM-G920F
AllianceROM has several different themes for user interface, but each user can completely customize the interface and change system settings according to their requirements. Quite an impressive list of additional features, some of which are truly unique, which you will not see in other custom firmware. I will not list them all for brevity, but the most important ones deserve mention - AllianceROM for Galaxy S6 initially gives root rights, the firmware is deodexed with the latest Busybox, init.d, Sqlite scripts are pre-installed, all the stock TouchWiz features remain, Aroma installer for selecting settings firmware that you want to install.
WanamLite has a solid list of features, making the firmware an attractive option for those looking for stock but with improved features. First of all, the firmware has a stock kernel that has been improved, there are root rights and Busybox support. If you are a fan of extra functionality, including phone call recording, an improved camera app and other user interface improvements, then check out WanamLite.
CarHD ROM v.1
Available for SM-G925F
Although the developers of this firmware also release builds for other models, CarHD ROM for the Galaxy S6 Edge is a real deficiency - the interface here is translucent, although some may not like it. The assembly is based on the latest official firmware(XXU1AODG) and has all the usual attributes of custom firmware - root rights, latest version SuperSU, BusyBox. The firmware is suitable for those Galaxy users S6 Edge that don't like stock firmware.
Hello dear readers. Sometimes, in pursuit of trends, we buy non-original fashion items and gadgets. Everyone wants to keep up with the times, so what to do when desires do not coincide with possibilities.
That's right, you can buy a copy of the original for much less. In addition, modern Korean and Chinese copy The Samsung Galaxy S6 g920f is so well made that your friends may not notice the difference.
In this material we will look in detail at how to do it. Galaxy firmware S6 SM-G920F. You will find out why it is being carried out, how to prepare your smartphone for it, how long the entire operation will take and, of course, specific instructions for carrying it out.
Why are we flashing the Chinese Galaxy S6 g920f?
Looks like a copy of the Galaxy S6 For a user who is encountering the term firmware for the first time. It seems to be some kind of complex process that must be done at a service center, or by experienced smartphone users.
In reality, things are much simpler. Firmware is the installation process software on the phone. If we draw an analogy with a computer, it reinstalls Windows in the same way. And this process, as everyone knows, is within the capabilities of any schoolchild. For the original smartphone, the Android platform is responsible for the software, but we will have the right to choose.
Thus, we need the Galaxy S6 g920f firmware to install software on the phone that will provide its controllability and further functionality that is convenient for us.
Preparing for firmware
In order for the firmware to be successful, we first need to prepare resources for a full-fledged work front.
First we download from the official server Samsung program Odin.
We also need to download drivers to connect the computer with the phone. Simply put, so that the computer recognizes and sees our smartphone.
Then you need to download the firmware that we prefer, for example G920FXXU4AOCV_6.0_marshmallow.
How long does the firmware take?
In the hands of an experienced user, the firmware takes about 5 minutes. By the way, it is worth noting that this process directly depends on the processor power of the computer on which it is carried out. A beginner can complete this task in half an hour, after which the smartphone will automatically reboot.
If you experience difficulties or problems, try reinstalling the drivers. Or replace the USB cable and connector.
Software download process So, first of all, we will unzip the firmware program and the firmware itself on the desktop. Well, everything seems to be ready, we can start.
We launch the Odin program.
Now we need to arrange the files in order in the corresponding fields: BL in BL, AP in AP, CP in CP, and CSC in CSC.
Then we switch the smartphone to firmware mode.
Now we connect our Korean or Chinese Galaxy S6 g920f to the computer, and watch how the program connects to it, the ID: Com sign should light up.
Now press the start button and let's go. The firmware begins to download.
If your firmware for a copy of the Samsung Galaxy S6 SM-G920F went like clockwork, put upvotes in the comments. If you have any difficulties, feel free to write angry comments, we will be happy to help you.
