Original firmware for highscreen boost 2. Necessary for obtaining Root rights
Instructions for flashing the Highscreen Boost 2 smartphone to a new official or custom firmware, installation custom recovery(recovery) and obtaining root superuser rights.
Before you start flashing your phone's firmware, you need to install drivers to connect your PC with the Highscreen Boost 2 phone. To do this, download the archive - ADB, unpack it and install it.
Connect the turned on phone to the computer. USB debugging should be enabled by default in your phone settings; if you disabled it, enable it. Right-click on the “My Computer/This Computer” icon and context menu select “Properties”. In the window that opens, look for “Device Manager” on the left and open it.
In the “Device Manager” window we see the connected device, for me it is “YunOS ACB phone”, click on it 2 times to open the list, we see “YunOS ACB Interface”. You have the driver installed.
If there is a yellow triangle next to your device, it means you do not have drivers installed.
In the folder where the drivers are located (by default C:/adb/) with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window”. Opens command line, write adb devices
List of devices attached
………………………. device
There should be symbols instead of dots.
Installing custom recovery on Highscreen Boost 2
Download any recovery that is suitable for the Highscreen Boost 2 smartphone
What you need is a file in the .img format, for example recovery.img. Place the downloaded file in the folder C:/adb/
Turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes it is necessary), and insert it back. Press the volume down and power on keys and hold for 5 seconds. will appear eternal Highscreen inscription (fastboot mode). We connect the phone via a wire to the computer.
In the C:/adb/ folder, with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window” and in the window that opens, write fastboot devices and see the following:
Then we write fastboot flash recovery recovery.img and press enter, then we write fastboot boot recovery.img and press enter, after which the process of flashing custom recovery on the smartphone should start.
Ready! The phone will boot into recovery on its own!
Installing custom firmware using recovery
The installation of the firmware will take place through the custom recovery TeamWin Recovery Project, and it is assumed that you installed this recovery from the previous paragraph of these instructions.
First, download the firmware you like and put it on the flash drive in your phone
Download Highscreen Boost 2 firmware – MIUI 4.8.8 RUS | cm-11 | Baidu_V6
We go into recovery, with the phone turned off, press the volume up key and the phone power button.
Do Backup (Required!), press the “Backup” button, move the bottom slider to the right and wait. We wait a long time... until the green inscription appears successful. While the recovery is running, the screen may go dark; the phone is locked.
Then we clean your smartphone from unnecessary system files, that is, we do a wipe. We go to the main recovery screen and press the “wipe” button, move the slider again and wait a long time again.
We install the firmware. Go to the main recovery menu and click the Install button. Find the downloaded firmware and click on it. Again we move the slider and jam again) At the end of the process the message sucsesful and 2 buttons restart system and wipe dalvik will appear.
Download firmware for Highscreen Boost 2 SE
| date | OS version | Name | Link |
| 13-09-2017 | Android 7.1 | Lineage OS 14.1 | |
| 13-09-2017 | Android 7.0 | zNougat | |
| 13-09-2017 | Android 7.1 | Phoenix Rom | |
| 29-07-2015 | Android 4.4 | 20141202_V2.9IIse | |
| 29-07-2015 | Android 5.1 | MIUI v5 | |
| 29-07-2015 | Android 5.0.2 | CyanogenMod 11 |
We must warn you that if you decide to update Android and reflash Highscreen Boost 2 SE, then you act at your own peril and risk. If with stock versions you can still roll back and return old firmware, then after installing an alternative version this may not work.
| Additional information on Highscreen Boost 2 SE . Getting root rights . User guide . Examples of photos and videos . Codes, Engineer . Tests (performance, battery, crash) . LineageOS . How to do a Hard Reset . Disassembly instructions . Remove pattern key . UnRoot |
The main difference between this smart and the rest is the huge battery. Highscreen Boost 2 battery capacity 6000 mAh!!!
Another plus is that you can add 2 gigabytes of RAM.
Disadvantages and problems
Based on reviews from real users. This gadget has few problems and these are what they are: it gets hot, it glitches, it turns off. Sometimes the Highscreen Boost 2 SE's buttons blink, won't turn on after flashing the firmware, won't charge, and the camera, sensor or GPS module won't work. It also happens that the speaker wheezes or the smart phone does not see the memory card. It happens that Play app market displays a message stating that there is not enough memory. Users are also interested in how to increase the speaker volume and enable 3G on Highscreen Boost 2.However, don’t let this long list of shortcomings of this smartphone scare you. These are isolated cases, just collected in one place;)
Firmware Highscreen Boost 2 SE
Highscreen Boost 2 SE detailed specifications
Model Housing Performance
| Chipset | Qualcomm Snapdragon 400 MSM8228 |
| Configuration | 4x 1.6 GHz ARM Cortex-A53 |
| Frequency | 1400 MHz |
| Cores | 4 |
| Bit | 64 |
| Graphic arts | Adreno 306 |
| Cores | 24 |
| Frequency | 400 MHz |
| Antutu v6 | 22.373 |
| GeekBench | 1232 |
| 3D Mark Ice Storm Unlim. | 4774 |
For new official or custom firmware, installing custom recovery (recovery) and obtaining root superuser rights.
Before you start flashing your phone, you need to install drivers to connect your PC with your Highscreen Boost 2 phone. To do this, download the archive - ADB, unpack it and install it.
Connect the turned on phone to the computer. USB debugging should be enabled by default in your phone settings; if you disabled it, enable it. Right-click on the “My Computer/This Computer” icon and select “Properties” from the context menu. In the window that opens, look for “Device Manager” on the left and open it.
In the “Device Manager” window we see the connected device, for me it is “YunOS ACB phone”, click on it 2 times to open the list, we see “YunOS ACB Interface”. You have the driver installed.
If there is a yellow triangle next to your device, it means you do not have drivers installed.
In the folder where the drivers are located (by default C:/adb/) with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window”. The command line opens, write adb devices
List of devices attached
………………………. device
There should be symbols instead of dots.
Installing custom recovery on Highscreen Boost 2
Download any recovery that is suitable for the Highscreen Boost 2 smartphone
What you need is a file in the .img format, for example recovery.img. Place the downloaded file in the folder C:/adb/
Turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes it is necessary), and insert it back. Press the volume down and power on keys and hold for 5 seconds. will appear eternal Highscreen inscription (fastboot mode). We connect the phone via a wire to the computer.
In the C:/adb/ folder, with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window” and in the window that opens, write fastboot devices and see the following:
Then we write fastboot flash recovery recovery.img and press enter, then we write fastboot boot recovery.img and press enter, after which the process of flashing custom recovery on the smartphone should start.
Ready! The phone will boot into recovery on its own!
Installing custom firmware using recovery
The installation of the firmware will take place through the custom recovery TeamWin Recovery Project, and it is assumed that you installed this recovery from the previous paragraph of these instructions.
First, download the firmware you like and put it on the flash drive in your phone
We go into recovery, with the phone turned off, press the volume up key and the phone power button.
Do Backup (Required!), press the “Backup” button, move the bottom slider to the right and wait. We wait a long time... until the green inscription appears successful. While the recovery is running, the screen may go dark; the phone is locked.
Then we clean your smartphone from unnecessary system files, that is, we do a wipe. We go to the main recovery screen and press the “wipe” button, again move the slider and again wait for a long time.
We install the firmware. Go to the main recovery menu and click the Install button. Find the downloaded firmware and click on it. Again we move the slider and jam again) At the end of the process the message sucsesful and 2 buttons restart system and wipe dalvik will appear.
Click restart and wait until the Highscreen Boost 2 phone reboots with the new firmware and rejoice.
Most owners of trendy smartphones or Highscreen smartphones have the Boost 2 SE model on the operating Android system 4.3 with a color IPS screen, touchscreen - 1280x720 dpi They believe that it is impossible to change the firmware in these gadgets yourself, but they are deeply mistaken.
The reasons why you need to flash a phone, a Highscreen smartphone model Boost 2 SE on the Android 4.3 operating system with a color IPS touch screen - 1280x720 dpi, are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore software after an unsuccessful installation or just wanted to install the most new version firmware.
Firmware Flashing of Highscreen alpha rage, spade, pure f and other models.
- You can do the firmware yourself on all phones, Highscreen smartphone model Boost 2 SE on the Android 4.3 operating system with a color IPS touch screen - 1280x720 dpi.In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash a mobile device to Android kit kat.
In what cases should you update the firmware of smartphones, Highscreen smartphone model Boost 2 SE on the Android 4.3 operating system with a color IPS screen, touchscreen - 1280x720 dpi and for other models:
If the phone does not turn on, although the reason may not be in the firmware;
If the phone constantly glitches and reboots;
If the firmware is unsuccessful and the phone needs to be returned to its original state;
If you need to install the latest, most modern firmware version;
Download firmwares, programs, flashers and Highscreen firmware.
Download free firmware for your Highscreen phone from your computer.
- official website of the manufacturer cell phones Highscreen, for the following models spade, pure f, verge and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example for Highscreen spade, pure f, verge, where you can also download RU, RP, software and driver for free on your mobile device.The search for software, first of all, should always be carried out on the official website of the electronics manufacturer; there are always the most current and latest firmwares for the Highscreen Hercules phone with a color IPS screen, touch dpi and other models with other characteristics.
Instructions for Highscreen firmware.
How to properly flash a smartphone. Instructions for firmware using the example of a Highscreen five pro, Hercules phone.
On your smartphone, go to Settings->Developer options and enable USB debugging.
We connect the USB cable from the phone to the computer and install the firmware.
Disconnect the phone from the computer, turn it off and remove the battery.
Launch the SP program on the computer Flash Tool, it is needed to upload new firmware to the phone.
In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.
Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).
Now click the Download button. We answer “Yes” to any pop-up messages.
We connect the smartphone (with via USB cable) to the computer, new firmware will start pouring into our device automatically.
When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.
For more information on how to do this, see the video instructions:
To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .
Instructions for flashing Highscreen five pro, hercules
One more example. Instructions for flashing the Highscreen five pro, hercules mobile phone.
Firmware for Highscreen five pro, hercules phone: download firmware for
Firmware Highscreen five pro, hercules
1. To update the firmware on Highscreen five pro, hercules, you need to download the firmware from the link above, the Smart Phone Flash Tool loader and USB firmware.
2. Turn on the phone, connect the USB cable and install the firmware.
3. After installing the firmware, turn off the device.
4. Run the loader program "Flash tool.exe".
5. Click “Download Agent” and select the “MTK AllnOne DA.bin” file (in the downloader folder).
6. Click “Scatter-loading” and select the file “MT6573 Android scatter.txt” (in the folder with the firmware).
7. Uncheck “PRELOADER”, click on “Download” and connect the USB cable.
8. After downloading the firmware, the bootloader will show the software installation status.
Note: When you connect your phone, the program should see it and start flashing the firmware. If the phone is not detected, then disconnect it from the computer, remove and insert the battery and reconnect it to the computer
Instructions for flashing Highscreen from the mobile version of the site.
And another example of firmware for the Highscreen five pro, Hercules smartphone. Other phone models are flashed similarly. The main thing is to find the required firmware for your phone model. You can find them on the Internet via Yandex. I can also recommend a good site with firmware
So, let's take it as an example Highscreen firmware five pro, hercules.
The first thing you need to do is download the firmware itself. It is presented as an archive in zip format. There is no need to unpack it, since you can reset it to an external storage medium, that is, an SD card.
The next thing to do is turn off the phone and fully charge its battery. After the battery is fully charged, you need to remove Charger and remove the battery, and after about 30-40 seconds put it back into the phone.
Next, press the power button and hold it for 1-2 seconds, while simultaneously pressing the key that decreases the volume. These two buttons must be held until the manufacturer's logo appears on the phone screen - Highscreen five pro, hercules. After this, you need to release the on/off key, but you must hold down the volume down until the Android logo appears. After it appears, you need to release the volume button and press up once, that is, increase the volume. We use the same button when moving through menu items, and select the required option with the power key. Select the menu item “apply update from external storage”, then select the archive that was saved to the external storage medium.
This completes the Highscreen five pro, hercules firmware. As you can see, during the installation process operating system there is nothing heavy on the phone and you can really do it yourself without resorting to paid services service centers or self-taught “handicraftsmen”.
But it should be noted that in case of incorrect actions when flashing the phone, it can be irrevocably damaged, turned into a “brick” - a useless and good-for-nothing piece of plastic and iron. Therefore, if you are not confident in your abilities, then it is better to entrust the flashing of a mobile phone or tablet to experienced programmers from an electronics repair service.
Download firmware for modern models Highscreen is better just from the official website of the phone manufacturer, you can do this by clicking on the link: download
To download proprietary software, use the link: official website firmwares. Here is a description of how to find a driver for your phone.
Using the link posted above in the text, you can download for free and read a description of how you can make firmware for the Android phone Highscreen five pro, Hercules and other models. This page contains a video review and instructions on how you can reflash your smartphone yourself; here you can download the firmware for your phone for free through the official website.
How to independently flash Android on a Highscreen five pro phone model on the Android 5 OS platform on a screen with a resolution of 1280x720, AMOLED color type, 16.78 million colors, touch, program on a computer Instructions for flashing, download and change the firmware on the phone Highscreen power ice, zera f, Boost 2 SE, four, zera s rev s, five pro, hercules, bay, alpha rage, spade, pure f, verge, winwin, pure j, spark 2, thor black, Alpha R, omega prime s mini, spider, winjoy, black gtx, Zera U, spark, yummy duo, boost 3 pro, blast, strike, alpha gtr, explosion, alpha gt, cosmo, jet duo for free through the official website.
Popular reviews on Highscreen
| How to watch and listen to outdated files in old formats, in particular, flash format on your phone? | |
 | Where can I download ringtones for free or listen to music on my Highscreen phone? |
 | Here you can find the latest and most current drivers for mobile phones and Highscreen tablets. This link contains the correct, correct programs and latest versions drivers for mobile devices Highscreen. |
| Where to download and how to install the application for free - Traffic Rules with questions and answers and explanations on Highscreen | |
 |
