How to connect an additional network drive. Methods for connecting a network drive. Mapping a network drive on Windows XP

Shared folder on a network drive Windows 10

So, how to map a network drive on Windows 10? We already know how to create it, but it’s not very convenient to search for the required shared folder in the network environment, especially if there are a lot of computers. It is much easier to have it appear as a separate drive that appears along with your “C” drive when the system boots.

To connect the network hard drive On Windows 10, the first step is to allow sharing of files and folders on your computer. To do this, right-click on the “Start” menu and go to “ Network connections»

Here in the left column click on “Change settings” public access»

• Enable network discovery
• Enable file and printer sharing
• Let Windows manage your homegroup connection

Mapping a network drive Windows 10

This was the preparatory stage - now let's move on to the main question, how to connect a network drive in Windows 10?
To do this, you need to open Explorer and in the left column, where the tree of drives and folders is, find the “My Computer” link - right-click on it and select “Map network drive...”.

In the window that pops up after this, select the letter for our future network Windows disk, for example "X".

After selecting the folder, leave the “Restore at logon” checkbox so that you don’t have to create it again every time you turn off the computer. And click “OK”.

Now, when you go to “Computer” in Explorer, among other system hard drives we will be able to see the “Z” drive in the “Network Location” section. You can get to it provided that the computer on which this network drive-folder is located is turned on.

Mapping a network drive on Windows XP

The technique for connecting a network drive on Windows XP is similar to that already described above. Therefore, we will describe here the connection method directly from the “Network Neighborhood” section.

Go to “Start > Network Neighborhood” and find the shared folder we need on one of the computers local network. Right-click on it and select the “Map network drive” menu item. You can also simply select “Service” in the top menu and select the same section.

Now if you go to “My Computer”, you will see hard disks, as well as network folders connected as network drives, indicated by separate icons.

That's all. For those who have not yet understood what it’s like, here’s a video:

Thank you! Did not help

A network drive is a tool used to open access to your resources within a local network. Connecting this element can be done in several ways, differing in complexity and software involved in the procedure. You can find out about them further.

Using network drives will significantly speed up work and navigation for users who frequently use the network.

How to map a network drive in Windows

Via "Computer"

Let's start looking at the procedure for setting up a network drive, which you can implement if you use the Windows operating system:

If you have completed all the steps described above correctly, then a separate disk should appear in the system, which can now be used as a network disk.

For normal operation network drive and other users gaining access to it, the computer where it is located must be turned on and connected to the local network.

The procedure for connecting a network drive is described more clearly in the video:

Via command line

Managing network drives via the command line requires at least minimal knowledge of code commands, so this method is rarely used by ordinary users. First, let's figure out how to launch the command window itself. To do this you will need:

Now let's look at the basic commands that are used when working with network drives:

• net use – this command used to check existing network connections and drives. After entering it, you can find out which letter indicates the active network drive, remote address and other information.
• net use W:\serverdoc– with this command you can create a new network drive. In the system it will be designated by the letter W, and the doc folder located on the server server will be used as the file directory.
• net use W: \serverdoc /user:DomainMyPC 12345678– this command is also used when creating network drives, but with advanced parameters. It indicates that a disk will be created with the name W, with a directory for storing files in the doc folder on the server server. The MyPC domain Domain record will be used as the account user. A password will also be set on the network drive – 12345678.

Thus, using just 3 commands, you can independently create and edit network drives if necessary.

Through group policies

The method of creating a network drive through group policies is already considered outdated by many, but most system administrators they use it. Let's look at how to map a network drive using group policies:

This method is quite difficult for users who do not have sufficient knowledge of the architecture of the Windows system itself, so it is recommended for use only by those who have a higher level of training.

How to map a network drive on Mac OS?

Mac OS differs significantly in its interface, as well as functionality from any Windows versions, therefore, we will consider the procedure for connecting a network drive on Apple computers separately. This procedure is carried out in the following way:

It is worth noting that you will have to do similar actions every time you turn on the computer. But this can be avoided by configuring the system so that it independently launches the network drive upon activation. Let's look at how to do this:

After completing all the above procedures, you can configure automatic start network drive when you turn on the computer under guidance Mac systems OS.

You can clearly see the instructions for connecting a network drive on Mac OS in the following video:

How to configure cloud storage as a network drive?

Today, many users use cloud storage to store their files. This is due to the fact that they are more protected in case of failures in the operating system. But how to turn cloud storage into a network drive? Let's consider several possible options:

The storage supports working with WebDav

Yandex.Disk is one of the most popular cloud storage services that supports the WebDav protocol, so to connect it as a network drive you do not need to install any additional software or carry out complex manipulations with the settings. To carry out the procedure, it is enough to know the special address of the storage facility, as well as the login and password to enter it.

Connecting Yandex.Disk storage can be implemented in a manner similar to setting up regular folders. To do this, launch Explorer, find the item “Computer” or “This computer” and select the item “Map network drive”. After this, a window will open in which you will see possible options connections:

Select any unallocated letter that will be used to designate the network drive in the future. Then, at the bottom of the main window, you need to click on the link “Connect to a site where you can store documents and images,” which will take you to the next settings screen, where in the “Folder” line you need to specify a link to the Yandex storage and click “Next” ":

It is important to note that it may take some time to establish a connection with the cloud storage, so you will have to be patient and wait.

After this, a window will open where you will be asked to enter personal data from your Yandex.Disk account:

Be sure to check the “Remember credentials” checkbox. Otherwise, you will have to re-enter them every time you start the system.

After entering them, just click “OK”. Now the disk storage will appear in the system as a network drive. You can treat it like any other directory.

The storage does not support working with WebDav

There are also storages that cannot be connected using the method described above, because they do not support working with WebDav. But the problem is easily solved with the help of special bridge programs. The biggest problem is that you will have to select software for each storage separately. Let's look at how this is done with Google Drive. To define the storage as a network drive, you should download the DAV-pocket lab program. After installation you will need to go through a simple registration.

Be sure to remember that the password and login for your account in the DAV-pocket lab program itself must be different from your data that is specified in the Google Drive storage.

After this, all you need to do is log in Google system Drive. Connecting a network drive is carried out in the same way as the method described for Yandex.Disk. Only in the folder line you will need to specify the following address: https://dav-pocket.appspot.com/docso

We've figured out Yandex.Disk and Google Drive, but what if you work with Dropbox? Despite the popularity of this repository, there are no special bridge programs for it. What to do in this case? You can use a universal client called CarotDAV. It allows you to connect several network drives from various cloud storages at once. To do this, simply select the required service and enter your login information:

Extended type error when mapping a network drive

Many users complain that when connecting to a network drive, the system displays an error in the following format: “The network drive could not be mapped due to the following error: Extended type error.” In this case, the user is unable to access his network resource. What to do and how to solve the problem?

The most common cause of such failures is an incorrect date and time. Incorrect data can cause conflicts in the network, which leads to such problems. To solve the problem, simply set the correct date and time.

If this does not help, you should contact a technician who specializes in working with local networks. Independent attempts to correct the situation can lead to irreversible consequences - loss of important data, failures in the network itself, etc.

Mapping a network drive is a fairly simple and safe procedure that can be carried out by almost every user, but for this you need to follow a certain sequence of actions. Incorrect connection can lead to malfunctions, which must be remembered.

So, first of all, let’s define what a network drive is and why it is needed. A network drive is practically the same as a regular hard drive that is in a computer. But its main difference is that it is physically located on another computer or server. For uninitiated users, a network drive will not be any different from the drive that is installed on their computer.

The only thing they may notice is that the speed of writing or reading data from a network drive will be significantly lower. But this will depend on the speed of the local network. Most often I use a network drive in large organizations where I work in programs with large databases. The database itself lies on the server, and users only have a client and they connect to the database through a network drive. It's very convenient and safe. But it is possible to connect a network drive simply to exchange documents between computers.
In order to connect a network drive you need to perform several simple steps that in all operating systems ah Windows are almost the same. In this example, we will connect and disconnect a network drive in Windows 7.

Let's open my computer.

Enter the address of the network drive and select the volume letter. Check the box next to Recover at login. This is necessary so that the network drive is connected every time the system starts. If you don't check the box after you reboot network will disappear disk.

Click ready. After which your network drive should open.

Next, let’s go into my computer and check if the network drive appears underlined in red. That's all we have connected to a network drive. In order to disconnect a network drive, you need to right-click on it and select Disconnect, then click OK.

Now you have learned how to connect and disconnect network drives. You can connect any number of them. Agree, everything is not so difficult.

Hello.

Let me outline a typical situation: there are several computers connected to a local network. It is necessary to share some folders so that all users from this local network can work with them.

To do this, you need:

1. “share” (share) the desired folder on the desired computer;

2. on computers on the local network, it is advisable to connect this folder as a network drive (so as not to search for it every time in the “Network Neighborhood”).

Actually, how to do all this will be described in this article (the information is relevant for Windows 7, 8, 8.1, 10).

1) Opening public access to a folder on the local network (folder sharing)

Before you can share a folder, you must first configure Windows accordingly. To do this, go to the panel Windows management at the following address: " Control Panel\Network and Internet\Network and Sharing Center"(see Fig. 1).

Then open the " Change Extra options public access«.

Rice. 1. Network and Sharing Center

1. private (current profile);
2. all networks;
3. guest or public.

You need to open each tab in turn and set the parameters as in Fig.: 2, 3, 4 (see below, clickable pictures).

Rice. 2. Private (current profile).

Rice. 3. All networks

Rice. 4. Guest or public

Now all that's left is allow access to the required folders. This is done very simply:

1. Find the desired folder on the disk, right-click on it and go to its properties (see Fig. 5);
2. Next, open the tab “ Access" and click the " Sharing" button (as in Fig. 5);
3. Then add the user “guest” and give him rights: either read only, or read and write (see Fig. 6).

Rice. 5. Opening public access to a folder (many people simply call this procedure “sharing”)

Rice. 6. File Sharing

By the way, to find out which folders are already shared on the computer, just open Explorer, then in the “Network” tab click on the name of your computer: then you should see everything that is open to public access (see Fig. 7).

Rice. 7. Shared folders (Windows 8)

2. How to map a network drive in Windows

In order not to climb into the network environment every time, not to open tabs again, you can add any folder on the network as a disk in Windows. This will slightly increase the speed of work (especially if you often use a network folder), and will also make it easier for novice PC users to use such a folder.

And so, to connect a network drive, right-click on the “ My computer (or This computer)" and in the pop-up menu select the function " Connect a network drive"(see Fig. 8. In Windows 7 this is done in the same way, only the icon " My computer" will be on the desktop).

Rice. 9. Windows 8 - this computer

After this you need to select:

1. drive letter (any free letter);
2. specify the folder that should be made a network drive (click the “Browse” button, see Fig. 10).

Rice. 10. Connecting a network drive

In Fig. Figure 11 shows folder selection. By the way, after making your selection, you only have to click “OK” 2 times - and you can start working with the disk!

Rice. 11. Browse folders

If everything was done correctly, then in “ On my computer (on this computer)"A network drive with the name you selected will appear. You can use it almost the same way as if it were yours. HDD(see Fig. 12).

The only condition: The computer on whose disk the shared folder is located must be turned on. Well, of course, the local network must work...

Rice. 12. This computer (network drive connected).

Very often people ask what to do if they cannot share a folder - Windows writes that access is impossible, a password is required... In this case, most often, the network was simply not configured appropriately (the first part of this article). After disconnecting password protection- problems, as a rule, do not arise.

Good job 🙂

Today, when prices are computer equipment become more or less acceptable, get your own own computer every family member can. There is nothing to say about small and medium-sized enterprises; the use of several computers connected into a single local network is commonplace. Naturally, in such conditions, users often have to exchange files while working. Using removable portable drives for this is not very convenient, so operating system developers have implemented such an option as creating a network drive. Essentially, this resource is a directory or a separately created logical section to which it opens, i.e. Hosts connected by a local network can connect. Very rarely, network drives on a home PC are created to be accessed from global network, for example, when a machine is used as a mini-server, generally shared folders on cloud services are used to provide unified access to user files from the Internet.

Today we will learn how to create and add a network drive on the local network. The main distribution computer is usually the administrator's computer, but it can also be any other PC on the network.

Sharing

It all starts with creating an ordinary folder with unusual properties. Our example resource will be called WorkFolder. Create a folder with a suitable name in the location you need, open its properties, switch to the “Access” tab and click the “Advanced settings” button.

In the new dialog box, check the “Share…” checkbox, set, if required, the number of concurrent users accessing it, and then click “Permissions.” By default, everyone has read-only permission, if you want other users to be able to edit files on the disk and write their data to it, change the permissions accordingly. Save the settings one by one.

At the last stage of saving, in the properties window you should see the message “Shared access available” and the path itself, starting with two slashes.

Now, by clicking the share button, add in the window that opens users who will be able to access the shared folder on their PCs, otherwise they will receive a network error, the description of which is presented in the screenshot below.

At this stage, the basic configuration of the network drive ends. The next step is to test network discovery. If your network is defined as private, discovery should be enabled by default, but if it is defined as public, you will most likely have to open it. Execute in the window Run command control /name Microsoft.NetworkAndSharingCenter, and then click on the “Change advanced sharing settings” link on the left.

Activate the "Enable network discovery" radio button in the current profile and apply the changes. To be able to connect a network drive, the manipulations done should be sufficient; if the latter then does not want to connect, try changing the network mode.

Adding a network drive

You can connect the newly created resource different ways, including through the usual CMD console, but we will consider the simplest option. Right-click on the “This Computer” shortcut (no matter where) and select “Map network drive” from the menu.

In the window that launches the wizard, select a letter for the future resource, be sure to check the “Use other credentials” checkbox, otherwise other users will not even be able to see it on their computers.

Using the browse button, select the folder for which you set up sharing.

After clicking the “Finish” button, Windows will ask for your current login and password.

The corresponding section should also become visible in the main workspace of this computer.

To disable a network resource, right-click on it and select “Disable” from the menu. You can also select it with the mouse and select “Disconnect network drive” from the Network ribbon menu.

Connect by name or IP address

There are also other ways to connect a created and configured shared resource, but they are less convenient. For example, instead of searching for it through browsing, you can specify its symbolic or IP address in the connection window field. The symbolic address is specified in the folder properties, the IP in the adapter properties “Local Area Connection” (IPv4 address parameter).

The same address can be obtained from command line by executing the command in it ipconfig /all(the data will be located in the section of the same name).

Using the Command Line

And finally, let's see how to map a network drive in Windows 7/10 using Command CMD lines or the PowerShell console, perhaps some will find this method even faster. The general command syntax looks like

net use \\ComputerName\ShareName[\volume]
username]

Here drive is a free drive letter, and \ComputerName\ShareName– path to the shared folder. Let's connect our WorkFolder folder from the desktop as a network drive, for which, in a line run with administrator rights, run the following command:

net use Z: //DESKTOP-8CS7OLG/WorkFolder /user:compik 11111

Parameter /user necessary so that the system does not request authorization. The string element “compik” in this example is the name of the computer administrator, and “11111” is his current password. To make a network drive mapped to permanent basis, and not just during an open session, you can add the key to the end of the command /persistent:yes.

To disconnect the disk, run the command net use z: /delete, where z is the drive letter.

Unfortunately, in the Windows 10 we tested, when connecting with the net use command, the corresponding volume was not displayed in the “This PC” section, remaining accessible from the Explorer navigation bar.

So, now you know how to set up a network drive, but these, of course, are only general recommendations. Practice shows that in the process of connecting this type of resource, you often have to deal with various errors, of which the most common is “Network path not found.” The causes of failures may be problems with the settings of network adapters, drivers, parameters network security and so on. In such cases, problems are usually resolved privately based on the identified cause.