Phone as a usb modem for android. How to connect Android to a computer as a modem. What is the essence and cost of such a connection?

However, via tablet or Android smartphone You can connect to the Internet without using WiFi. If you connect your tablet (smartphone) to your computer via a USB connector. Typically this connection is used to copy files. However, you can use your tablet (smartphone) as a USB modem.

First, of course, you need to make sure that the tablet (smartphone) is connected to the Internet and everything is working fine. Then you need to connect the tablet with a cable to the USB connector of the computer. In this case, the tablet will ask you to enable the mode USB storage- this request should be ignored. Next, open the main menu and find there " Settings". In the settings you need to open the tab " Wireless network- Data transfer - More - Modem mode". In the right pane there will be an option " USB modem" and the comment "USB connection is established, check the box to connect":

Enable this option and the computer will see your tablet (or smartphone) as a network device.

Tablets (smartphones) with a processor MediaTek MTK when connected to a computer, they are recognized as a network card with an RNDIS adapter and for this network card a connection is created automatically:

This connection is established and works automatically. You don't need to do anything.

However, Windows XP may not correctly recognize your tablet (smartphone) and install a driver for it. If there is no such connection in your network connections, then open Device Manager and look - there should be an unidentified device there. If it is then you need:

2. In Device Manager, look at the VID and PID values ​​for your tablet (smartphone).

3. Edit the inf file. In the sections you need to add an entry with VID and PID for your tablet.

For the MTK8389 processor it will be VID_0BB4&PID_0003.

4. Save the file and specify it as the driver for your tablet.

Note. This method is possible for Windows XP SP3 or Windows Vista, 7, 8. Windows XP SP2 and earlier cannot work with RNDIS.

If you found this article useful or simply liked it, then do not hesitate to financially support the author. This is easy to do by throwing money at Yandex Wallet No. 410011416229354. Or on the phone +7 918-16-26-331 .

Even a small amount can help write new articles :)

In modern realities, access to the Internet is necessary for most users even more than, say, a mug of water. After all, we all communicate in in social networks, we constantly post photos taken a few minutes ago, watch movies if we’re bored, for example, in class. But what should you do if you need to access the Internet from a computer, but, unfortunately, there is no modem or the provider is carrying out some technical work? Or, in fact, you are somewhere outside the city with a laptop and you urgently need to talk on Skype.

In this case, you can connect your phone and use it as an external modem. In this material we will describe in detail how to connect Android as a modem in various ways.

The instructions are, in principle, suitable for most Android versions, however, menu items and some tabs may have different names.

How to use Android as a modem via USB

If you have a USB cable from your phone with you, you can connect it to your computer and use it as an external modem.

1. To do this, first go to the settings of your device and select the “Other networks” tab.
2. Go to "Modem and Access Point". The system will notify you that you need to connect the device to the computer.
3. Take a USB cable and connect your smartphone to your computer.
4. As soon as the device is connected, the active “USB modem” tab will appear on the screen. Click on it to enable your smartphone to activate modem mode.
5. Now you can open your browser and check that the Internet is working correctly.

How to use Android as a modem over Wi-Fi

One of the most useful and truly necessary options in operating system Android is the distribution of the Internet through a point Wi-Fi access. The idea is that your phone acts as a Wi-Fi hotspot, and other devices can connect to it and use the Internet to access the network. All technologies are supported, both 3G and 4G.

1. To set up traffic distribution via Wi-Fi, you will need to go to “Settings” on your device, select the “Other networks” menu item and go to the “Modem and access point” tab.
2. Here you need to create a new access point, setting parameters for it: point name, security level, password, etc. Once you fill in all the data, save the point and turn on Wi-Fi.
3. Now, to connect to your point, you need to activate Wi-Fi from a computer or other device, find an access point and enter a password. Remember that you specify the password yourself in the settings, and then give it to the person who will connect to your device.

Setting up the EasyTether Lite program to operate the modem on Android

If you have difficulties connecting the device using the methods described above, then use the EasyTether Lite program, which allows you to turn any smartphone into a full-fledged modem for accessing the Internet in a matter of minutes.

1. And so, you need to download the EasyTether Lite program to your device specifically for Android, and a separate version for Personal Computer.
2. Once the programs are installed, take the USB cable and connect your smartphone to the computer. The system will require the installation of additional drivers. Be sure to install them for correct and stable operation of the application.
3. Now enable USB debugging mode on your device. To do this, you will need to go to “Settings”, select the “Applications” tab, then click on the “Development” and “USB Debugging” menu item.
4. On your computer, find the EasyTether Lite shortcut and right-click on it. In the appeared context menu select Connect Via Android.
5. In just a few seconds, your device will be activated and you will be able to access the Internet from your computer.

How to use a Samsung phone as a modem

If you have an Android smartphone from Samsung, then you can use another method. As a rule, Samsung devices also come with a CD containing the program. Samsung Kies.

1. If the Kies application is missing, then download it from the company's official website and install it on your computer.
2. Once the program is installed, go to your Android settings and disable the “USB storage” option.
3. Next, connect the device using a USB cable and install the driver, if necessary. As a rule, in Windows 7 and higher, the system automatically installs the required driver for connected devices.
4. Now go to the “Settings” of your device and select the “Wireless Networks” tab. Next, click the “Modem and access point” menu item and check the boxes next to the “USB modem” and Mobile AP items.
5. Now on your personal computer, go to the “Control Panel” and click on the “Connection” item. Here you will need to display everything network connections, and find your device. If it is in the list, it means the device is connected and working correctly. Now you can access the Internet via your computer.

Possible connection problems

Statistics show that very often novice users encounter a lot of problems, even if they already know how to connect their Android as a modem on a laptop, personal computer or any other device.

Below we have listed the main list possible problems and their solution:

1. No access to 3G, 4G network– you cannot connect and use the device as a modem, because no access to wireless technologies 3G, 4G. The solution is to move to another place in an open area, check the correct operation of the wireless technology, contact the operator cellular communication(perhaps you have restrictions on the transmission and reception of data over the Internet).
2. The device does not connect via USB– the computer does not see the phone, cannot use it as a modem, and does not install drivers. The solution is to check your PC for viruses and latest updates Windows, try using a different one USB port To connect the cable, manually install drivers for the smartphone by downloading them from the manufacturer’s official website or CD, if one was included.

If you have any other problems when connecting your device to a computer or using your smartphone as a modem, leave a comment with detailed description problems, and our specialists will help you as soon as possible.

If you are interested in how to connect a 3g modem to android tablet, then there is nothing simpler. The procedure for connecting a USB modem to any Android device is so simple that even an inexperienced user can handle the steps. However, before you begin, it is worth finding out what problems may arise when performing such an operation.

Tablet and modem

Nowadays it's hard to imagine life without good internet. It is especially missed by tablet owners. The problem is that most of them do not have CDMA and GSM modules, which makes it impossible to have Internet on the road or in places where there is no high-speed Internet distributed via Wi-Fi. This problem can be solved by connecting a modem to the tablet. There are only 2 ways to do this.

The second method is more complicated and causes some inconvenience, but is an order of magnitude cheaper than the previous one. It consists in the fact that the USB modem is connected directly to the device itself. The connection process can be divided into three stages:

• connecting a modem to a gadget;
• Android setup;
• setting up the modem.

Each stage may be accompanied by the emergence of some problems, which, fortunately, are easy to solve.

A few words can be said about the types of modems. Nowadays 2G and 3G technologies are widespread. 2G are representatives of a very slow Internet, which can only be used in the absence of good, high-speed coverage.

3G has a good data transfer speed, which is more than enough for watching a movie, video calling on Skype, etc. The speed may be limited by the tariff you choose.

Connection rules

Carefully read the instructions on how to connect the modem to your smartphone or tablet. Android based. In some cases, we may need an OTG adapter cable and a personal computer or laptop.

First, you need to purchase a USB modem and check it for compatibility with your device (100% operability with Android on Huawei E171/E173/E352, and on ZTE MF-100/MF-120/MF-180). To do this, you need to connect the devices to each other. Here's where you may run into problems:

Internet access is a necessity for many people. Users communicate on social networks, watch videos, and work. But what if you need to access the Internet from a computer, but don’t have a modem?

Can a smartphone be used as a modem? Yes, this option is possible, since it will serve to access the Global Network. The connection procedure is simple, just follow simple rules.

Using a smartphone as a modem via USB

How to use a smartphone as a USB modem? If there is a cable from the phone, then it is connected to the computer and used as an external modem. For the procedure to work, you must perform the following steps:

• You need to open the device settings, and then find the “Other networks” section.
• You should select "Modem and access point". You will be notified that a connection to your computer is required.
• The USB cable must be connected to the PC.
• Then the “USB modem” tab will appear, which you need to click on to activate.
• Then you need to open the browser and check the Internet.

This completes the procedure. If everything is done correctly, the device can work with the Internet. If there are any failures, the procedure must be completed again.

Using a smartphone as a modem via Wi-Fi

One of the necessary functions in the Android OS is the distribution of the Internet using a Wi-Fi access point. How to use a smartphone as a modem for a computer? The phone will serve as an access point, and other devices can connect to access the Network. In this case, 3G and 4G work.

To configure traffic distribution using Wi-Fi on your device, you need to visit the “Settings” section, select “Other networks”, and then click “Modem and access point”. Then you need to create an access point, specifying the necessary parameters: name, security level, password. After filling out, you need to save the data and turn on Wi-Fi.

To connect to the point from a computer or other device, you need to connect Wi-Fi, select an access point, and enter a password. It should be taken into account that you need to come up with control information yourself. Then it can be communicated to the person who will use the Internet.

How Easy Tether Lite works

How to use a smartphone as a modem if difficulties arise with other methods? In this case, the Easy Tether Lite program will help, which is needed to turn a smartphone into a modem. It must be downloaded on both devices. After this, you need to connect the smartphone to the PC via a USB cable. The system requires installation of additional drivers. This is necessary for the application to work correctly.

Then you need to enable the function on the device. Go to the “Settings” section, click “Applications”, “Development” and “USB Debugging”. You need to find the program on your computer and click on it. When the menu appears, you need to select “Connect Via “Android””. After a few seconds, the device will become operational, after which you can use the Internet.

Using a Samsung phone as a modem

How to use a smartphone as a modem if the equipment is Samsung? This company issues a CD with the product, which includes Samsung program Kies. If this application is not available, then it should be downloaded from the company’s official website. After installation, you need to visit the settings, turn off the “USB storage” function.

Then you need to connect the device using a USB cable, and also install the driver. In Windows 7 and other versions, installation is performed automatically. Then you need to go to “Settings”, select “Wireless Networks”. In the “Modem and access point” menu, you need to check the boxes next to the “USB modem” and “Mobile AP” items.

Then on your PC you need to enter the “Control Panel” and click “Connection”. This section will show you the network connections from which you need to select your device. If it is present in the list, this means that the technique is working correctly. Then you can use the Internet. How to use Windows smartphone as a modem? You must use the same scheme.

Possible connection difficulties

In practice, users face many difficulties, even if they know how to use a smartphone as a modem. A common problem is the lack of access to 3G and 4G networks. In this case, you will not be able to use the Internet, because there is no access to wireless technologies. The way out of the situation is to move to another place, as well as check that the device is working correctly. You can call your telecom operator. There may be restrictions on transmitting and receiving data over the Internet.

Another problem is also likely - the equipment does not connect via USB. The phone does not appear on the computer, so it cannot be used as a modem. It is necessary to check your PC to see if there are viruses, and whether Windows updates. You can try using a different USB port to connect the cable. Often helps manual installation driver that needs to be downloaded. If such problems are solved, a smartphone can perfectly replace a modem.

Many smartphone users often need to access the Internet. However, it happens that the 3G module of the phone gives an error and does not allow you to use the global network. Also, many smartphones do not have 3G, but this does not mean that users of such devices are not able to access the Internet. The problem can be solved using a special modem that must be connected to the smartphone. Let's look at how to do this.

Connecting a 3G modem to a smartphone

Connecting a 3G modem to your phone is quite simple. However, a caveat is that the device can often be identified as a flash drive.

In order for your smartphone to detect a 3G modem, you must do the following:

1. Download the HyperTerminal utility.
2. Install it on your computer.
3. Find Device Manager and among installed devices find your modem.
4. Right-click on the device name and go to the “Properties” menu.
5. In this menu you will find information about the port number and speed. They will need to be rewritten and then entered into the “HyperTerminal” utility.
6. Run the utility and enter any connection name.
7. Now you need to enter the data you wrote down.
8. After this, a command prompt will open in which you will need to enter the command “AT1”. Command line may not appear immediately, wait for it to appear. This may take about ten seconds.
9. Next, click “OK” and enter the command “AT^U2DIAG=0”.
10. Wait for a response that the entered command is correct, click “OK” and turn off the modem.
11. If your smartphone does not have a 3G module, download the PPP Widget application.
12. Launch it and enter your details mobile network, which are on the website of your mobile operator.

Now you can connect a 3G modem and use it to access global network. As you can see, the problem is much simpler to solve than it might seem at first glance. And in order to learn more about how to set up the Internet on your phone, you should read these articles.