After loading windows there is a black screen what to do. Black screen on a laptop or computer: looking for the cause and troubleshooting. Rollback to one of the previously created restore points

If you have never encountered such a phenomenon as a black screen, namely a black screen when loading Windows, this does not mean that this cup will pass you by. Therefore, our note is intended both for those who have already encountered this problem, and for all other personal computer users. Let’s formulate the problem more precisely: what to do if a black screen appears on the display while the computer is booting, and further startup of the machine turns out to be impossible. Very often, on this black background there is one white spot: a blinking cursor in the form of a horizontal line in the upper left corner of the screen. Such a black screen and cursor plunged more than one user into despondency.

At first glance, the situation seems deadlocked. In practice, it turns out that the way out is quite simple. Moreover, there is not one, but several recipes for dealing with a dark display on a computer at the beginning of startup. We will look at some of them, namely those that lead to success in the most direct way. There are many different problems that can occur when starting a computer, but this is one of the most infamous. For the simple reason that an IT neophyte is unlikely to find a way to solve it on his own. So, let's take a closer look at this topic.

The place where the problem is solved

To localize the problem, you need to gain access to the Windows interface in any way. The only question is how to do this if the system does not want to start. The answer in this case is simple: use the safe mode service. For those who do not know what this is, we will give some explanations. A safe mode of operation of a computer is a mode of its operation in which only the most necessary components. If Windows is, in principle, capable of showing signs of life, then turning on in safe mode will certainly be possible.

To go to a safe moment when starting the computer, you need to hold down a special key (usually the F8 key). In this case, something like this will appear on the screen with options:

One of the options is safe mode work. There are several varieties of this mode with or without network infrastructure support, with or without command line support. We'll need the one labeled simply as "Safe Mode." Use the arrow keys on your keyboard to move the cursor to this option and press “Enter.” After this, you may have to wait.

Authentication failed

If you are using an unlicensed system starting with version 7, then each update entails sending information to Microsoft about the authenticity of your license. What if you don’t have such a license at all? If you use an ineptly “cracked” Windows that literally screams about it to the entire Internet? There are three solutions to this problem:

• Disable system update.
• Purchase a license.
• Use a special program that cracks the licensing system.

It’s quite easy to do both, and the third. But our advice to you: pay the money for the license and don’t worry about anything else. The slogan: “Pay and don’t worry” could be written in capital letters on the Microsoft logo. If you don't do any of the above, then any solution to the black screen problem will be temporary. After the next update, you will see this screen again.

The OS will notify you that it is aware of your license issues when running in Safe Mode. Firstly, the usual background picture, and secondly, a warning message will appear at the bottom of the screen. Like this:

For example, a cracking program: the RemoveWAT21 utility, you can search for it on the Internet.

Reason: video card

What should I do if a black screen appears when I have an OS license? It must be said that there are many reasons for the appearance of blackness on the display: one of them is the video card of your computer. More precisely, drivers for the video card. Damaged or crashed video adapter drivers inevitably lead to problems like ours. If the problem really is with the video card, then you need to restore the damaged driver, preferably by downloading it latest version

• on the adapter manufacturer's website. For uninformed citizens, here is a list of video card parameters that you should focus on when installing the driver:
• Adapter manufacturer (NVIDIA, AMD, etc.).
• OS type: Windows, Linux.
• OS version: XP, 7, 8, 10.

All these parameters will need to be specified on the card manufacturer’s website page from which the driver will be downloaded. To determine the manufacturer, it is enough to have the DirectX library installed on the system. Type the following command in the Run window: dxdiag. A window similar to this will appear:

The “Manufacturer” field indicates the manufacturer of the equipment.

Reason: broken registry

Let's move on. You have entered the secure registry, everything is in order with your license, you have updated the video card drivers, but Windows still does not load - a black screen appears. How to start Windows, how to restore its operation? Perhaps a black computer screen began to appear due to accumulated critical errors in the system registry.

For those who don’t know what a registry is, here’s some information: Windows registry– a special database containing settings for both the system itself and the programs installed on it. Data in the registry can also be damaged by a virus.

You can get to the registry data using the registry editor, which is called up in the “Run” window with the regedit command. An editor window will appear on the screen:

This window has a left pane with a tree of registry keys and a right pane with registry keys in a key-value format. We will be interested in the section HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon. And the key is in this section called Shell. If this key is empty, then enter the string “explorer.exe” into its value and save the changed data. All this is done, as usual, in safe mode. After this, restart the computer. After this, the system should be restored and normal boot progress should be restored.

AVZ utility

When a black screen and cursor begin to appear after loading Windows, you can try using the AVZ utility. This multifunctional program can help in many situations. Usually, after restoring the system with its help, everything starts working normally. But this is a topic for another conversation. Here we will only indicate the very possibility of its use. We hope you found our article useful and the black screen disappeared from your monitor.

A black screen appears when Windows startup? Don't panic, read all the reasons for a black screen and ways to solve this problem in this article! Modern computers and its mobile analogues are multi-component devices, and the more complex the device, the greater the number of reasons that can lead to malfunctions. A quarter of all users experience the problem and see a black screen on their display. Faced with this popular failure, people often turn to specialists for paid help, however, practice proves that often the causes of problems can be quickly and inexpensively eliminated by anyone on their own. The material below will help you successfully complete the task.

Content:

Identifying the cause will allow you to specifically eliminate the problem when the black screen turns on. You just need to be attentive to the little things, for example, when you turn on the PC, is there any noise, whether the indicators on the case light up, etc. Even seemingly insignificant mechanical impacts on a complex device and the appearance of liquids on internal components as a result of temperature changes or careless user operation with the device are most often the causes of problems leading to a black screen.

Also, among the main reasons why a black screen appears, special attention needs to be paid to the following:

1. Hardware or software conflicts resulting in the graphical interface not being displayed;
2. Battery malfunction;
3. Problems with video accelerator, RAM, motherboard, hard drive, etc.;
4. Driver incompatibility;
5. Device overheating;
6. System failure;
7. Problems with the display (monitor).

What to do if a black screen appears when loading Windows 10 or 7?

Black Windows screen indicates serious problems with the PC, so people who do not have sufficient experience are better off trusting a specialist.

I consider it my duty to note that all the recommendations below serve as informational material and not a call for mandatory implementation. Interfering with the operation of complex devices without experience can damage an expensive gadget.

It is better to perform simple actions, the meaning of which is completely clear to a person, and not try to gain experience at the cost of causing unconscious harm to the computer.
For example, simply completely disconnecting the PC from power and then turning it back on in half the cases leads to the successful loading of Windows 7-10.

Only when this does not help should you proceed to more complex measures described later in this guide.

After installing a utility or game on your computer, a black screen often appears when loading Windows. In these cases, using the restore point (TV) function through safe mode (BR) will help.

The following steps must be taken:

1. Start the PC from a bootable USB flash drive;
2. Click “System Restore”;
3. For the PC to enter BR after reboot, use the command: “bcdedit /set safeboot minimal”;
4. Restart PC;
5. Log in to the control panel (in “Ten” this menu was called “Options”);
6. Open the “Update/Security” tab and go to the “Recovery” section;
7. Click “Start”;
8. Next, choose one of the two proposed options for action (at the personal discretion of the computer owner);
9. Wait until the process completes.
10. Ready.

LifeCD will help eliminate the appearance of a black screen when starting a PC.
The sequence of steps is as follows:

1. Install lifeCD into the drive;
2. Next, while the PC is booting, enter the BIOS and set the priority of starting the OS from the drive;
3. Close the BIOS, saving the adjustments entered into it;
4. Wait for the PC to start from the disk;
5. "System Restore";
6. "Further";
7. Click “Startup Recovery”;
8. Wait;
9. Ready.

If a black screen appears when you turn on the computer, it is recommended to use BR (safe mode).
To start in BR and fix the problem, you only need to complete a few steps:

• Immediately after turning on the PC, press “F8” (another button may be used, so you must first read the accompanying documents for the PC);
• Using the arrows on the keyboard, select BR and click “Enter”;
• Wait for loading;
• "Start";
• “Programs” and go to the “Standard” section;
• Click “Service”;
• Click “System Restore”;
• Specify TV (recovery point) and click “Next”;
• Click “Done”;
• Wait for completion;

Disabling unnecessary or conflicting programs

After loading into BR, open the control panel and go to the “Programs and Features” tab, where you sort programs by the time they were installed on the PC. Often simply uninstalling the most recently installed utilities will fix the problem. Also, CCleaner, which is available for free on the Internet, allows you to uninstall applications without leaving “tails” behind them.

If the user does not want to uninstall utilities, they can be disabled and excluded from the Windows autorun list:

• In the search line (Windows key combination + R) of Start, type “msconfig”;
• After clicking on “Enter”, enter Services in the menu that appears, where to disable unnecessary programs, and from the “Startup” tab remove applications that are unnecessary for everyday use.

For Tens users, to get to the startup section, just launch the “Task Manager” (TZ).

Video drivers are available for free, but during installation you need to be careful so that the software is fully compatible not only with the components of the PC, but also with the operating system running on it. To find out the exact information about which drivers need to be installed, it is recommended to use the “dxdiag” parameter.


By clicking on the “Windows and R” key combination, you will need to type the above word and click “Ok”. A menu will be displayed where, in the “Screen” tab, you can view information about the video accelerator installed in the PC. After searching for drivers, downloading and installing them current versions The black screen no longer appears. However, it happens that it is also caused by malicious applications that have infected the system. The next paragraph of the instructions is devoted to this reason.

Even after the procedure for restoring the operating system, it is advisable to carry out a full analysis for the presence of “malware” in it, which again damages the OS files.
If the OS still does not start at all, you need to remove the hard drive from the problematic PC and connect it to a work computer and check for viruses. You can use “Dr Web CureIt” for this. In it you need to select the connected hard drive and start the analysis by clicking “Run scan”.

Restoring the Windows Registry and Explorer

Windows provides automatic creation and saving of copies of the registry in the “System32\config\RegBack” directory, which is located in the Windows partition.

You need to move the files from the specified directory to the “config” directory. Of course, in this case you will have to confirm the firmness of your intentions and click “Replace”.
This is easy to do when the conductor is functioning normally, but if not, you will need to restore it using boot disk OS and AVZ utility.

To this end, perform the following actions:

1. Open the main menu “AVZ” (you can use the “portable” version of this free antivirus program, which runs from a flash drive);
2. Click “File”;
3. Click “System Restore”;
4. Check the boxes for “Explorer Restore” and “Desktop Restore”;
5. Click “Perform selected operations”;
6. Log in to the “Control Panel”;
7. Next, go to the “Add and Remove Programs” tab;
8. Uninstall suspicious utilities;
9. Install bootable media with the OS into the drive and then in the “File” tab click “DZ”;
10. Click “New task” and continue to command line type "sfc /scannow";
11. Click “Enter”;
12. Restart the PC by logging into Windows in BR;
13. Open the directory located on the OS CD under the name “i386”;
14. Copy explorer.ex_, temporarily removing one letter from the extension;
15. Copy the created file to the system volume;
16. Next, add the missing letter “e” in the extension;
17. After typing “regedit”, click “Ok”;
18. Open the directory HKEY_LOCAL_MACHINE;
19. Expand content “Software”;
20. Go to the “Microsoft” folder;
21. Open the “WindowsNT” subfolder;
22. Next, from the “CurrentVersion” directory, go to the “Winlogon” subdirectory;
23. For “Shell”, indicate the location of the file created when performing steps 15-17;
24. Click “Ok”;
25. Open the “DZ” menu again;
26. Right-click on the “explorer.exe” process;
27. Click “End process”;
28. Then in the remote control “New task”;
29. Type "cmd";
30. Click “Ok”;
31. In the console, type “Cd C:\”;
32. Click “Enter”;
33. Type “copy explorer.exe C:\Windows”;
34. Input;
35. "Yes";
36. Restart PC;
37. Ready.

How to remove the black screen after updating Windows 10?

If such a failure occurs after Windows updates 10, correcting the error does not take much time, since usually the mouse cursor and keyboard remain operational.
The sequence of actions is as follows:

1. CTRL + Shift + Esc;
2. In the DZ, click “File”;
3. Click “Run new task”;
4. Type “cmd” and specify creation with extended privileges;
5. Type “sfc /scannow”;
6. "Input";
7. Automatic analysis and error correction will begin.

Black screen when turning on the computer before Windows loads

If there are no signs of life on the display before Windows starts, that is, the monitor has a black screen from the very beginning, but there is sound. System sounds are heard when the OS starts and you can hear, for example, the noise of coolers, creaking of RAM, etc., which means you need to check the operation of the monitor and the elements connecting it to the system unit. If you have this problem with your laptop, check the cable connecting the display to the motherboard.

Desktop and mobile PCs are equipped with a VGA socket.
You can connect another monitor through this socket. If there is no such socket, then you will need to use the HDMI connector. The main thing is that the procedure for connecting an additional display is carried out with the PC turned off.


When normal operation with an additional monitor, you can make a diagnosis of a malfunction of the original one.
With monitor repair yourself to the average user It is beyond our power to cope, so it is recommended to consult a specialist.

The most difficult part of a PC is the motherboard ( motherboard). There are dozens of components on it, any of which is a fragile and small element. It is not possible for a simple user to identify the cause of a motherboard malfunction, since this requires special diagnostic equipment.

Mechanical damage occurs when PC components, such as RAM strips, cards, and the processor itself, are installed incorrectly on the motherboard.
Even a simple case of a needle or a piece of wire getting on the surface of the motherboard leads to the failure of expensive equipment.
Upon careful examination, sometimes you can identify defects in contacts in slots, crumpling (swelling) of resistors, broken tracks (scratches), darkening of some areas on the motherboard, but without the skills and tools to repair the component, it is not recommended to carry out resuscitation actions on your own.

Sometimes even the burning smell coming from the computer case can tell you what the problem is.

Similar problems apply to video cards, which usually need to be replaced with new ones after mechanical damage.

Although the most scary situation, when the motherboard fails, but an equally unpleasant surprise is the failure of the hard drive. Moreover, there is not even a cursor arrow on the monitor.
You should diagnose the hard drive and, perhaps, you will be able to save the data stored on it. important information. In case of negative diagnostic results, all that remains is to buy another HDD or hard drive for your PC.
You can tell that it is the HDD that is broken (if the PC cannot boot) by the smell of burning, strange sounds from the HDD when it is operating, or the absence of minor vibrations or heating during its operation.

The easiest and most effective way to remove a black screen

If you can’t start in BR (safe mode), then it’s easier to get rid of the black screen by standard reinstalling the OS. As a result, the user receives a stable working system. It is convenient to use for this purpose bootable USB flash drive by creating it in the Rufus utility.

The application is free and fully Russified, and most importantly, tested by millions of users.

Why does a black screen appear when launching games or steam?

Gamers are the most likely to encounter glitches. Even the acquisition official versions games does not guarantee the absence of errors and black screens. Most often, the weak link is the video accelerator and problems with drivers, as already noted above in this guide.

Therefore, first of all, it is advisable to analyze the operation of the graphics adapter, for example, with the FurMark application. It will provide information about the video card model and its operating modes.
The Game Booster program has similar functionality. Gamers are recommended to regularly analyze the operation of the video accelerator using these software.

Based on the results of the analysis, the user will know what measures need to be taken, for example, upgrading drivers.
Also, failure to launch games occurs if there are problems with other PC components, which often overheat under increased load. It is necessary to clean them from accumulating dust and change the thermal paste, otherwise heat will be dissipated less efficiently.
Gamers for popular games have developed standard algorithms for eliminating failures in the form of a black screen. About them we'll talk further.

Solving the black screen problem when starting Far Cry 4

To solve this problem you need to follow these 5 steps:

• Open the page “www.playground.ru/files/far_cry_4_extreme_inject” and install the patch;
• Disable antivirus software;
• Extract the contents of the patch into the “bin” directory;
• Run “Extreme Injector v3.exe”;
• Ready. Now the game will open normally and work without interruptions.

Getting rid of the black screen when starting watch dogs 2

Follow 4 steps to solve black screen problem for watch dogs 2:

• Launch the toy;
• After the black screen appears, click Alt+Enter;
• Make adjustments to the screen resolution through the game menu;
• Ready.

Simply lowering the resolution quickly resolves the glitch.

Black screen when watching videos on the Internet in Windows - what to do?

If a black screen appears when watching a video and interferes with your enjoyment online broadcast favorite content, the following steps will help:

1. Right-click on the video;
2. Click “Options”;
3. Uncheck the box in the menu that appears;
4. Click “Close”;
5. Exit the Internet browser;
6. After restarting the video in the browser, the crash will no longer bother the user.

Black screen YouTube: How to remove the black screen on Android when watching a video from YouTube (but there is sound)

You can get rid of the black screen on your Android phone when playing a video by installing updates for YouTube.


If this does not help, then you need to do the following:

1. Clean the CoolPlay services using one of the “cleaner” utilities;
2. Disable mobile data reception and transmission on the device and deactivate the Wi-Fi module;
3. Enter settings;
4. Go to Applications - all;
5. Delete GooglePlay data;
6. For the YouTube application, also clear all data;
7. Next, delete the cache in the Memory tab;
8. Close all running menus and reboot the gadget;
9. Connect to the Internet;
10. Ready.

What if when you turn on the laptop there is a black screen and cursor?

If there is an arrow on the screen, then you can fix the problem using software methods.

Adjusting the software settings:

1. Disconnect the laptop from the network and remove the battery;
2. Hold down the power button for about 10 seconds;
3. Connect to the power supply (remembering to install the battery back; it is recommended to first wipe the contacts with alcohol);
4. Turn on the laptop;
5. Click start in normal mode;

Programs designed to remove the Windows black screen

In addition to the programs mentioned above, the “RemoveWAT21” utility effectively allows you to fix failures in Windows 7 computers due to activation problems.
Steps:

• Install the utility;
• Remove activation;
• Reactivate and disable system license analysis;
• Ready. Now a black screen due to failed activation will never appear.

The described utility is equipped with a manual, so even beginners will not have any difficulties after installing it.
Also, one of the most multifunctional programs is AVZ, the use of which has already been introduced above. An antivirus program can eliminate most of the causes of the error in question.

It is able to quickly restore the OS response to exe files, scr, pif and com, and also help reset Internet Explorer protocol prefixes. If necessary, restores the Windows desktop and Explorer.

Fully ready for Windows work can be read after the desktop and applications added to startup are loaded; until this point, the system may experience slight freezes. But it may also happen that at some stage an error occurs and Windows will not be able to boot completely. A typical example of this is the appearance of the so-called black screen of death or Black Screen.

It looks like this: the computer successfully passes the POST procedure, the system boots normally, but the desktop does not appear. Instead, after loading Windows 7/10, the user sees a black screen with or without a mouse cursor. Another variation of the same problem is that a window appears on a black screen with the error “The script file C:/Windows/un.vbs cannot be found.” This happens most often because the Explorer file responsible for the operation of the system’s graphical shell cannot start normally.

There may be several reasons for this, but usually it is either some kind of conflict in operating system, or the consequences of viruses. The likelihood that the problem is caused by hardware problems, in particular, the failure of the video card, is small, otherwise the screen would be completely black, and there would be neither a cursor nor the Windows logo on it. So, what should you do if you get a black screen when loading Windows 7/10? In any case, do not make hasty decisions and do not rush to reinstall.

Delays after installing system updates

It has been noticed that sometimes Black Screen appears immediately after installing cumulative or major Windows updates. This may be temporary, so you may need to wait a bit. If the desktop does not appear within an hour or two, then this should be a cause for concern. Restart the computer, not with the Reset button, but through the Task Manager called up by pressing Ctrl + Alt + Del.

Select from its menu File – Create New Task and run the command in the window that appears shutdown /r /t 0.

If the black screen appears again when starting Windows 7/10, most likely you have become a victim of an error when installing updates or a bug in the updates themselves.

Error during update installation

The appearance of a black screen when loading Windows 7/10 can cause a failure during the installation of updates, for example, a sudden shutdown of the PC at the time of installation. In addition, the updates themselves may contain bugs, which Microsoft itself admits. If you have every reason to believe that updates are the cause of the black screen, you need to remove them.

It is best to do this in safe mode. To enter it, press the F8 key during reboot or run the command in the window for creating a new task msconfig.

After the system boots, go to Control Panel, launch the Add or Remove Programs applet and click on View installed updates on the left.

Remove Latest updates, then reboot.

Software conflict

Everything that has been said regarding updates is also true for video card drivers, screen adjustment programs, etc. If the problem appeared after installing a new driver, then you need to remove it, again by booting into safe mode. The same applies to installed new programs.

Damage to registry entries, viruses

An even more common cause of the problem is the action of malware that overwrites the parameters in the system registry that are responsible for launching the graphical shell. Then you will see a black screen when you start the computer in both boot modes. In this case, we do this. Using Task Manager, open with the command regedit registry editor

Expand the thread:

HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/Winlogon

Pay attention to the parameter Shell. Its value must be specified explorer.exe and nothing more.

If something else is specified, then you need to replace this entry with explorer.exe, otherwise the graphical shell will not start either in normal or safe mode. If the Shell parameter does not exist at all, create it and set it to the specified value. At the same time, check the parameter value Userinit, it must be C:/Windows/system32/userinit.exe.

Note: on 64-bit systems you should also check the Shell and Userinit values ​​in the key HKEY_LOCAL_MACHINE/SOFTWARE/Wow6432Node/Microsoft/Windows NT/CurrentVersion/Winlogon and fix them as shown above.

After making changes to the registry, reboot as usual. This method has proven to be effective in many cases of PC infection with viruses; it allows you to quickly eliminate the black screen and cursor when starting Windows 7/10, however, it does not solve the main task - removing malware from the system, so after loading the desktop you need to carefully check the entire contents of the disk antivirus scanner.

Failure to install updates, viruses, or incorrectly working video card drivers are the main reasons why the user sees a black screen and cursor when turning on the computer. In fact, there may be more. The appearance of Black Screen was noted when changing parameters account administrator, after optimizing and cleaning Windows with third-party tweakers and cleaners.

It may not be possible for a novice user to determine what exactly causes the error. If, when starting Windows 7/10, a black screen with a cursor continues to appear, it is best to roll back to the system. Such points are automatically created by Windows when important changes are made to the system - installing programs, drivers, etc. Best used for these purposes installation disk with the distribution kit of your system version.

Boot from such media, wait for the installation wizard window to appear, click “Next” and then “System Restore”.

Then we choose Troubleshooting - System Restore.

Specify the target system and click “Next” in the window.

Select the desired point and follow the further instructions of the wizard.

Once the procedure is complete, you will be prompted to restart your computer.

Rolling back to a restore point is effective way restore the functionality of the damaged system, but this is only possible if Windows settings The corresponding protection function is enabled. Its capabilities, however, are also limited. If your computer won't start, there's a blinking horizontal cursor on a black screen, or error messages appear at the top, these could all indicate more serious problems. In such cases, the need to conduct hardware diagnostics or restore the system partition from an exact copy (image) cannot be ruled out.

PC users are sometimes taken by surprise by an unpleasant situation when the computer does not start after turning on, but looks at the user indifferently black screen with text or blinking cursor. Why did this happen and what to do now?

If, when you turn on your computer, you suddenly don’t see the familiar Windows 7 splash screen (XP, 8,9,10), but only black screen without signs of life - don’t panic and don’t rush to reinstall Windows! It is quite possible that you can cope with the problem on your own.

Let's take it step by step possible options what happened.

1. Let's consider situations when, when you press the computer's power button, it refuses to work and start loading Windows. Perhaps there is a very simple explanation for this - the lack of electricity supply.

What to do to check this

2. If, when you turn on the computer, you hear the rustling sound of the computer starting up. hard drive, but the display remained black, then you need to find out where exactly the problem happened and what specifically does not work.

How can I check this?

• Carefully disconnect the monitor cable from system unit. If the message “No signal” appears on the screen, this means that the monitor itself is fine, and the problem is somewhere in another part.
• If, after turning on the computer, you see the monitor on indicator light, but the image itself is missing, try bringing the flashlight close and shining it - the image may be visible, but it is very faint. If you can see it, this indicates a malfunction of the backlight lamps or the monitor inverter. This problem can only be resolved by an experienced technician at a service center.

3. If you have completed all the steps described above, investigating the causes of possible mechanical external inconsistencies, but still have not established the cause of the appearance black screen, it is possible that the problem lies within the system hardware.

How to check what happened

4. If you have done all the steps described above, but when you turn on the computer still refuses to work and load Windows, demonstrating black screen with a cursor flickering on it, and maybe some text. This means that a glitch occurred somewhere in the software.

What to do in this case

In conclusion, I want to reveal simple secrets on how to prevent yourself from seeing a black screen:

• shut down your computer correctly, this will protect it from malfunctions and allow the system to boot without errors;
• regularly defragment your hard drive and check it for errors;
• install antivirus program and make sure it scans your computer daily for malware;
• If possible, try to prevent overheating of the computer components; if necessary, take care of an additional fan;
• Regularly clean the system from dust, this will ensure reliable contact between the connections.

I hope that thanks to this article you were able to find the answer to the question: “what should I do if, when I turn on the computer, it refuses to work and I don’t see the usual Windows boot?”

A black screen when loading Windows 7 means that the system initially boots after turning on the PC in the same way as usual, but stops at the stage when the cursor flickers on a dark background. For an inexperienced user, this situation can be very frightening. But don't worry: the black screen is a modified version of " blue screen death." Unlike its older “brother,” a black screen allows the user to perform any actions and more effectively correct errors in the OS. So, how to restore the system?

Method number 1. Using safe mode

If you see a black screen when loading Windows 7, the first thing you should try to do is solve the problem through Safe Mode. To do this, start restarting the computer and press the F8 button on the keyboard. This must be done before the logo appears on the screen. An entire menu with several items will be displayed on the monitor, from which you need to use the "" and "↓" buttons to select "Safe Mode" and then press Enter. What will it give? This mode provides the ability to run only those programs and services that are necessary for the correct operation of the system. This same mode is used by specialists to use computers that have been subject to virus attacks, and it is also used to recover deleted data and to prepare the computer for reinstalling the OS. If, after switching to safe mode, you see a desktop with shortcuts, a taskbar and other tools on the screen, it means that the black screen when loading Windows 7 appeared due to a malfunction of some service that you installed shortly before the problem arose. The most logical solution to the problem would be to perform a system restore or remove recently installed programs and drivers using the "Control Panel" ("Uninstall Programs" item).

Method number 2. Restoring or reinstalling Windows

If you are unable to enter Safe Mode, you can perform a system restore. To do this, insert a Windows disc into the drive and, following the prompts on the screen, select the appropriate options. If the black screen problem persists even after doing this, you will most likely need to completely reinstall Windows.

Method number 3. Reactivate Windows

Sometimes errors related to system activation lead to a black screen appearing when Windows 7 starts. If you are using licensed software, you just need to re-enter the code and confirm the data.

Method number 4. If your computer is infected

Perhaps this reason is the most common among those that cause a black screen to appear when loading Windows. There is a certain algorithm of actions, following which you can correct the situation. First of all, you should press the Alt+Del+Ctrl button combination and open the task manager. In the window that opens, you will see the "Processes" tab. That's what we need. You need to find the explorer.exe process. If there is none, click on the “New task” button and enter its name in the window that opens. If the black screen disappears after completing the steps, the problem is almost solved. All that remains is to select the “Run” item in the “Start” menu, enter the path HKEY_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> WindowsNT -> CurrentVersion -> Winlogon, and then enter the value explorer.exe next to the Shell item. If something else is already written there, it must be erased.

Method number 5. Restore the system using an antivirus

This is another method that can help you fix black screen when loading Windows XP and other versions of the popular OS. If the steps described in method 4 did not help, you need to open the task manager again. Using the “New task” item you already know, open Internet Explorer(to launch the browser, enter iexplorer.exe). Should be installed AVZ program, and then run it. Next, in the program window, select “File -> System Restore” and check the boxes responsible for the Explorer launch key and Explorer settings.

Method number 6. System recovery

And finally, the last option on how you can independently fix the black screen when loading Windows 7. To do this, while the black screen is displayed, you need to press the Shift button five times in a row or hold it down for 10-15 seconds. A dialog box will appear asking you if you want to enable Sticky Keys. At the bottom of the window there is a link offering to go to the Special Center. opportunities - click on it. At the top of the new window you can see the search bar in the control panel. Enter “Task Manager” and wait for the Control Panel to open. We need an item called "System". Next, go to the "Protection" tab. The “System Properties” window will appear on your monitor, where you will immediately see the “Restore…” button. Following the program's instructions, select a restore point - it is best to choose those made during the period when the OS was 100% stable.