Silicon power formatting utility. Programs for repairing flash drives Transcend, Silicon Power, Adata, Kingston. Procedure for restoring Silicon Power drives

Various problems with USB drives or flash drives are something that probably every owner faces. The computer does not see the flash drive, files are not deleted or written, Windows writes that the disk is write-protected, the amount of memory is displayed incorrectly - this is not a complete list of such problems. Perhaps, if the computer simply does not detect the drive, this guide will also help you: (3 ways to solve the problem). If the flash drive is detected and works, but you need to restore files from it, first I recommend that you familiarize yourself with the material.

If various ways fix USB drive errors by manipulating drivers, actions in Windows Disk Management, or using command line(diskpart, format, etc.) did not lead to positive result, you can try utilities and programs for repairing flash drives provided by both manufacturers, for example, Kingston, Silicon Power and Transcend, as well as third-party developers.

On the official website of Silicon Power in the “Support” section there is a program for repairing flash drives from this manufacturer - USB Flash Drive Recovery. To download you will need to enter an address Email(not checked), then the UFD_Recover_Tool ZIP archive is downloaded, which contains the SP Recovery Utility (requires .NET Framework 3.5 components for operation, will be downloaded automatically if necessary).

Similar to the previous program, SP Flash Drive Recovery requires an Internet connection to work and restoration of work occurs in several stages - determining the parameters of the USB drive, downloading and unpacking a suitable utility for it, then automatically performing the necessary actions.

Download the repair program Silicon flash drives Power SP Flash Drive Recovery Software is available for free from the official website http://www.silicon-power.com/web/download-USBrecovery

If you are the owner of a Kingston DataTraveler HyperX 3.0 drive, then on the official Kingston website you can find a utility for repairing this line of flash drives, which will help format the drive and bring it to the condition it had when purchased.

You can download Kingston Format Utility for free from https://www.kingston.com/ru/support/technical/downloads/111247

ADATA USB Flash Drive Online Recovery

The manufacturer Adata also has its own utility that will help fix flash drive errors if you cannot read the contents of the flash drive, Windows reports that the disk is not formatted, or you see other errors related to the drive. To download the program you will need to enter serial number flash drives (so that exactly what is required is loaded) as in the screenshot below.

After downloading, run the downloaded utility and follow a few simple steps to restore the operation of the USB device.

Official page where you can download ADATA USB Flash Drive Online Recovery and read about using the program - http://www.adata.com/ru/ss/usbdiy/

Apacer Repair Utility, Apacer Flash Drive Repair Tool

Several programs are available for Apacer flash drives - different versions of Apacer Repair Utility (which, however, cannot be found on the official website), as well as Apacer Flash Drive Repair Tool, available for download on the official pages of some of the Apacer flash drives (look specifically on the official website yours USB model drive and look at the downloads section at the bottom of the page).

Apparently, the program performs one of two actions - simple formatting of the drive (Format item) or low-level formatting (Restore item).

Formatter Silicon Power

Formatter Silicon Power - free utility low level formatting flash drive, which, according to reviews (including in the comments to the current article), works for many other drives (but use it at your own peril and risk), allowing you to restore their functionality when no other methods help.

The utility is no longer available on the official SP website, so you will have to use Google to download it (I do not provide links to unofficial locations within this site) and do not forget to check the downloaded file, for example, on VirusTotal before launching it.

SD Memory Card Formatter for repairing and formatting SD, SDHC and SDXC memory cards (including Micro SD)

The SD Memory Card Manufacturers Association offers its own universal utility for formatting the corresponding memory cards if problems arise with them. Moreover, judging by the available information, it is compatible with almost all such drives.

The program itself is available in versions for Windows (Windows 10 is also supported) and MacOS and is quite easy to use (but you will need a card reader).

You can download SD Memory Card Formatter from the official website https://www.sdcard.org/downloads/formatter/

D-Soft Flash Doctor program

The free D-Soft Flash Doctor program is not tied to any specific manufacturer and, judging by reviews, can help fix problems with a flash drive through low-level formatting.

In addition, the program allows you to create an image of a flash drive for subsequent work not on a physical drive (to avoid further malfunctions) - this can be useful if you need to get data from a Flash drive. Unfortunately, the official website of the utility could not be found, but it is available on many resources with free programs.

How to find a program to repair a flash drive

In fact, there are much more such free utilities for repairing flash drives than are listed here: I tried to take into account only relatively “universal” tools for USB drives from different manufacturers.

It is quite possible that none of the above utilities are suitable for restoring the functionality of your USB drive. In this case, you can use the following steps to find the desired program.

Additionally: if all the described methods are repaired USB drive didn't help, try.

Good day!

If your flash drive begins to constantly fail: it cannot be formatted, when connected to a computer it often freezes, when copying files to it errors occur, but it has not been subjected to mechanical stress - there is a CHANCE for restoring its functionality!

It would be nice if, when connecting a flash drive, it was at least somehow detected, for example: a connection sound is made, the flash drive is displayed in "my computer", the LED on it blinks, etc. If the computer does not see the flash drive at all, then first I recommend reading this article:

In general, give universal instructions, how and with what program what to do to restore a flash drive - impossible! But in this short article I will try to give an algorithm that will help even novice users to understand the problem and solve it.

Restoring a flash drive // ​​step by step

Controller Model Definition

By the will of fate, it turned out that I had one flash drive, which Windows refused to format - an error occurred "Windows can't complete formatting". The flash drive, according to the owner, did not fall, no water got on it, and in general, it was handled quite carefully...

All that was clear after examining it was that it was 16 GB, and its brand was SmartBuy. When connected to a PC, the LED lit up, the flash drive was detected and visible in the explorer, but it did not work properly.

SmartBuy 16 GB - "experimental" non-working flash drive

To restore normal work flash drives, you need to reflash the controller chip. This is done with special utilities, and for each type of controller there is its own utility! If the utility is chosen incorrectly, then with a high degree of probability you will completely ruin the flash drive... I’ll say even more, for one model range flash drives - there may be different controllers!

Each device have their own unique identification numbers - VID and PID , and the flash drive is no exception. To select the correct flashing utility, you need to determine these identification numbers (and the controller model based on them).

One of the most simple ways find out the VID, PID, and model of the flash drive controller - use this special utilities. One of the best of its kind is .

Flash Drive Information Extractor

A small free utility for getting maximum information about a flash drive. No need to install it!

The program will determine the model of the USB flash drive, model and type of memory (all modern flash drives are supported, at least from normal manufacturers)...

The program will work even in cases where it is not defined file system flash drives when the computer freezes when connecting the media.

Information received:

• controller model;
• possible options for memory chips installed in the flash drive;
• type of installed memory;
• maximum current consumption declared by the manufacturer;
• USB version;
• the full physical volume of the disk;
• disk space reported by the operating system;
• VID and PID;
• Query Vendor ID;
• Query Product ID;
• Query Product Revision;
• Controller Revision;
• Flash ID (not for all configurations);
• Chip F/W (for some controllers), etc.

Important! The program only works with USB flash drives. MP3 players, phones and other devices - it does not recognize. It is advisable, before starting the program, to leave only one flash drive connected to the USB ports, from which you want to get maximum information.

Working with Flash Drive Information Extractor

1. We disconnect everything that is connected from the USB ports (at least all drives: players, external hard disks etc.).
2. Insert the flash drive to be repaired into the USB port;
3. We launch the program;
4. Press the button "Get information about the flash drive" ;
5. After some time, we get maximum information about the drive (see screenshot below).
6. If the program freezes- don’t do anything and don’t close it. After a couple of minutes, remove the flash drive from the USB port, the program should “hang” and you will see all the information that it managed to pull out from the flash drive...

Now we know the information about the flash drive and we can start searching for the utility.

Information about the flash drive:

• VID: 13FE; PID: 4200;
• Controller model: Phison 2251-68 (second line in the screenshot above);
• SmartBuy 16 GB.

Addition

You can reliably determine the controller model if you disassemble the flash drive. True, not every flash drive case is collapsible, and not every one can be put back together later.

Usually, to open the casing of a flash drive, you need a knife and a screwdriver. When opening the case, be careful not to damage the inside of the flash drive. An example of a controller is shown in the screenshot below.

Disassembled flash drive. Controller model: VLI VL751-Q8

Addendum 2

You can find out the VID and PID of a flash drive using the device manager (in this case, you don’t need to install anything). True, in this case we will not recognize the controller model, and there is some risk that VID and PID it will not be possible to accurately identify the controller. And yet, suddenly the above utility freezes and does not provide any information at all...

How to find a utility for flashing a flash drive

Important! After flashing the flash drive, all information on it will be deleted!

1) Knowing the controller model, you can simply use search engines (Google, Yandex for example) and find what you need.

The operating algorithm is as follows:

1. We go to the site:
2. Enter yours VID and PID into the search bar and look for it;
3. You'll likely find dozens of lines in the results list. Among them you need to find a line that matches: controller model, your manufacturer, VID and PID, flash drive size .
4. Further in the last column you will see the recommended utility. By the way, please note that the version of the utility also matters! All that remains is to download the necessary utility and apply it.

After you find and download the required utility, run it and format the media - in my case, you only had to press one button - Restore .

Formatter SiliconPower v3.13.0.0 // Format and Restore. An end-user utility designed for both low-level and high-level (FAT32) formatting of flash drives on Phison controllers of the PS2251-XX line.

After a couple of minutes of blinking the LED on the flash drive, it began to work normally, messages from Windows about the impossibility of formatting no longer appeared. Result: the flash drive was restored (became 100% working) and given to the owner.

That's all, actually. I would be grateful for any additions on the topic. Good Luck!

Manufacturers of USB drives place software on official websites for the convenience of users. Therefore, Silicon Power recommends flash drive recovery using the UFD Recover Tool software.

To do this, you need to go to the official website, register, download the program directly in the registration window. In addition, on the same site there is software from the official partner of the Piriform company called Recuva File Recovery. It restores files deleted from the drive.

When you insert some USB storage devices into a slot, the computer incorrectly detects the amount of memory. There are known cases when the case was marked 32 GB, and when disassembled the chip turned out to be 1 GB in size.

Recovery Features

The most common case in which the Silicon Power flash drive recovery program is in demand is the message in the window: “Error, write protection” / “The drive is write protected.” A program to determine the controller being used will help you choose the optimal utility for restoring a Silicon Power 16 Gb flash drive. At the same time, it is very important to know the type of microcircuit, since the software edition depends on it.

The ChipGenium program copes better than others with the task of recognizing a player or flash drive. It successfully interrogates most models, and for rare exceptions it takes data from the VId\PID database, displaying information about them with a high degree of probability.

Old versions of ChipGenium (3.0, 3.1) are useless for our chosen task, since they cannot poll devices. Assemblies operating system editions of ChipXP, Zver, Windows PE will also not allow you to display the correct information. ASMedia controllers 3.0 are not designed for this utility.

The domestic software manufacturer is not lagging behind its Western competitors. ANTSpec Software produces Flash Drive Information Extractor software. The advantage of the utility is its compatibility with USB ports 3.0 from AS Media. Decrypted information is released only in program versions older than 7.0. I recommend this software for SMI, Phison, Innostor, Alcor controllers.

The last program needed to select the correct utility to recover a Silicon Power 8 Gb flash drive is ChipEasy. The utility polls the latest generation 3.0 connectors with errors, therefore, it is better to use the traditional 2.0 port. The operating principle differs from the previous two, however, the program confidently takes third place in the ranking.

Drive firmware

In difficult cases, when the programs discussed above are not able to restore a Silicon Power 4 Gb flash drive, I recommend flashing the device with one of the utilities and programs. To do this you will need to find out the VID&PID and follow the instructions:

• The flash drive is pulled out of the connector
• after launching the utility, the installation of drivers is confirmed, which should be removed automatically after flashing the firmware and closing the program
• To do this, you need to manipulate the menu: Driver > Uninstall drivers
• The flash drive is inserted into the PC, the OS offers to install a driver on it
• click “Automatic”, after installation click Enum
• Now the computer detects the device, you can click Start to flash the firmware
• OK status means firmware without errors, otherwise you can decipher the problem using the error code (Menu Help > Error Code List)

At the penultimate stage, a problem is possible - the computer does not detect the device. In this case, go to: C:\Program Files\Program nameDriver\InfUpdate.exe, launch it by double-clicking, register the VOD&PID of the flash drive in it. Users who do not know this parameter can use ChipGenium. After flashing the firmware, the program should be uninstalled, otherwise the drivers will not be removed, and the OS simply will not see the flashed flash drive. At the last stage, in order to restore the Silicon Power b32 Gb flash drive, the drive is formatted using Windows.

Thus, you should first obtain accurate information about the controller and the type of chip. Then try to revive the media using the utility from the official website, and, if unsuccessful, use the firmware option followed by formatting using your OS.

Losing information on a memory card is a very unpleasant thing. What if there was valuable information on the drives? Its loss can be a real tragedy, and a flash drive recovery utility can be a salvation. But before we describe the process of recovering information on a hard drive, let’s consider possible reasons loss of information on memory cards:

Drive software failure. If your flash drive does not open and asks you to format it, this is exactly the case. It is usually caused by a crash of a special driver installed on any flash card. You can install it again, and then the drive’s functionality will be restored. However, the information will have to be restored separately. - Virus attacks. Yes, picking up a virus by transferring information from one PC to another is as easy as shelling pears. Some viruses specialize specifically in deleting/damaging files. - Mechanical damage. May be caused by temperature changes, shocks, falls, etc. In this case, the memory card may become completely unusable. But even in this case, it is possible to recover information! - Incorrect operation. A flash drive and/or information on it may be damaged in cases where: you do not use the “Safely Remove Hardware” option, remove the USB drive while downloading, recording information, watching movies, etc.

Flash drive recovery programs

How to recover information on a flash card? In almost all of the above cases, special utilities for flash drive recovery will help us. There are a huge number of them now. We recommend that you use only proven software products. “Flash Drive Recovery 2.0” is a powerful utility for recovering flash drives. She is capable of:

Recover information on drives of different formats and manufacturers (Silicon Power, Kingston Datatraveler, Alcor Micro, Corsair Voyager) and any sizes (4gb, 8gb, 16gb, 32gb).
Work in cases where the flash drive has been formatted many times.
Recover information even on damaged memory cards.

Recover up to 100% of deleted information.

Flash drive recovery software can recover data from any type of storage device (music devices, digital cameras, flash drives, USB drivers, PC cards, etc.). This utility repairs all damaged and deleted files even if the memory card has been reformatted.

How to recover a Silicon Power flash drive

In our world, almost everything breaks and Silicon Power flash drives are no exception. The damage is very easy to notice. In some cases, some files begin to disappear from your storage device. Sometimes the drive simply ceases to be detected by the computer or any other device (it happens that it is detected by the computer, but not detected by the phone, or vice versa). Also, the memory card can be detected, but not opened, and so on.

In any case, it is necessary to restore the flash drive so that it can be used again. Unfortunately, in most cases you will not be able to recover any information and it will be permanently deleted. But after this, the USB drive can again be fully used and information can be written to it without fear that it will be lost somewhere. It is worth noting that removable media from Silicon Power very rarely last long after restoration; they still have to be replaced.

You can restore Silicon Power removable media using the programs that the company itself released. Besides this, there is something else software, which helps in this matter. We will analyze proven methods that have been tested by users from all over the world.

Method 1: Silicon Power Recover Tool

The first and most famous utility from Silicon Power. It has only one purpose - to fix damaged flash drives. Silicon Power Recover Tool works with removable media with Innostor IS903, IS902 and IS902E, IS916EN, and IS9162 series controllers. Its use is extremely simple and looks like this:

Download the utility, open the archive. Then open the folder AI Recovery V2.0.8.20 SP" and run the file RecoveryTool.exe from it.

Insert your damaged flash drive. When the utility is launched, it should automatically detect it and display it in the box labeled " Device" If this does not happen, choose it yourself. Try restarting the Silicon Power Recover Tool several times if the drive still doesn't show up. If nothing helps, then your media is not suitable for this program and you need to use another one. But if the media is displayed, just click the " Start

Method 2: SP ToolBox

The second proprietary program, which includes as many as 7 instruments. We only need two of them. To use Silicon Power ToolBox to recover your media, do the following:

Download latest version programs. To do this, go to the official Silicon Power website and below, opposite the inscription “,” click on the download icon. Below are links to download instructions for using SP ToolBox in PDF format, we don't need them.

Next you will be asked to log in or register. It’s convenient that you can log in to the site using your Facebook account. Enter your email address in the appropriate field, check two checkboxes (“ I agree..." and "I read...") and click on the " Continue».

After this, the archive with the program we need will be downloaded. There is only one file in it, so open the archive and run it. Install SP ToolBox and launch it using the shortcut. Insert the flash drive and select it where it initially says “ No device" Do some diagnostics first. To do this, click on the button " Diagnostic Scan", and then " Full scan" to perform a full scan rather than a quick scan. Under the inscription " Scan result"The result of the check will be written. This simple procedure will allow you to find out whether your media is truly damaged. If there are no errors, most likely it is a virus. Then just scan your media with an antivirus and remove everything malware. If there are errors, it would be best to format the media.

For formatting there is a button " Secure Erase" Click on it and select the function " Full Erase" After this, all data will be erased from your storage device and it will restore its functionality. At least that's how it should be.

Also, for fun, you can use the health check function (that’s what it’s called) of the flash drive. There is a button for this Health" Click on it and you will see the status of your media under the inscription “ Health».

Critical- means critical condition;

Warming- not very good;

Good- implies that everything is fine with the flash drive.

Under the inscription " Estimated Life Remaining» You will see the approximate service life of the storage media you are using. 50% means that the flash drive has already served half of its life.

The program can now be closed.

Method 3: SP USB Flash Drive Recovery Software

The third program from the manufacturer, which recovers flash drives from Silicon Power with great success. In fact, it performs the same process that users usually do using the iFlash service. Read about what it is and how to use it in the lesson on restoring Kingston flash drives.

The point of using this service is to find the necessary program and use it to restore the flash drive. The search is carried out using parameters such as VID And PID. So, USB Flash Drive Recovery independently determines these parameters and finds the desired program on Silicon Power servers. Its usage looks like this:

Download USB Flash Drive Recovery from the company's official website. This is done in exactly the same way as in the case of SP ToolBox. Only if the system requires authorization again, remember that after registration you should have received a password by email, which you must use to log into the system. After authorization, download the archive, open it, then open the only folder that you will see on the screen several times (one folder inside another). Finally, when you reach the final folder, run the file " SP Recovery Utility.exe».

Then everything happens completely in automatic mode. First, the computer is scanned for a Silicon Power flash drive. If one is detected, USB Flash Drive Recovery determines its parameters (VID and PID). Then she searches the servers for a suitable recovery program, downloads it and runs it. All you have to do is press the desired button. Most likely, the downloaded program will look like the image below. If so, just click on the “Recover” button and wait for the recovery to complete.

If nothing happens and all the above processes fail, perform them manually. If scanning does not start, which is highly unlikely, check the box next to the inscription “ Scan Device Information" The field on the right will begin to display relevant information about the ongoing process. Then check the box next to “ Download Recovery Tool Kit" and wait for the program to download. Then unzip the archive - it's marked " Tool Kit UnZip"and use it, that is, run it - " Execution Tool Kit" Then the recovery utility will launch.

Using this tool also does not make it possible to save the data contained in the drive's memory.

Method 4: SMI MPTool

This program Works with Silicon Motion controllers, which are installed in most Silicon Power flash drives. SMI MPTool differs in that it performs low-level recovery of damaged media. You can use it as follows:

Click on the button Scan USB" to start scanning your computer for a suitable flash drive. After this, your media should appear on one of the ports (column " Items"on the left). Click on it in this column to highlight it. Actually, if nothing happens, it means that the program is not suitable for your carrier.

Now click the button Start" and wait for the restoration to complete.

In some cases, it helps if you do the above steps several times. In any case, it's worth a try. But, again, don’t expect data to be saved.

Method 5: Recuva File Recovery

Finally, we have reached a method that allows us to restore at least part of the damaged information. Only then will it be possible to restore the functionality of the device itself using one of the utilities described above. Recuva File Recovery is not SP's own development, but for some reason it is located on the official website of this company. It is worth saying that this is not the same program that is familiar to all of us. All this only means that Recuva will be the most effective in working with flash drives from Silicon Power.

Only when you choose where you want to scan for deleted or damaged files, select the option " On my media card"(this is step 2). If the card is not detected or no files are found on it, start the whole process again. Only now select the option “ In a specific location" and specify your removable media according to its letter. By the way, you can find it out if you go to “ My computer”(or simply “Computer”, “This computer” - it all depends on the version of Windows).

Scan" at the bottom of the program window.

After this, the scanning process will begin. In the largest field you can see all the files and folders available for recovery. On the left there are two more fields - the results of a quick and deep scan. There may also be folders and files that can be recovered. To do this, select the desired file with a checkmark and click the “Recover” button in the lower right corner of the open window.

After the recovery of lost data has been completed, use one of the above utilities to restore the functionality of the entire drive. You can also use the standard Windows tool to check disks and fix errors.

Finally, you can format your removable media using other programs or the same standard means Windows. As for the latter, you need to do the following:

In the window " Computer"("My Computer", "This Computer"), right-click on your flash drive. In the drop-down menu, select “ Format…».

When the formatting window opens, click on the " Begin" If it doesn’t help, start the process again, but uncheck the box next to “ Quick…».

Good luck to you!