Umbrella system control unit for electric boiler. ZONT - H Thermostats for remote control of the boiler. Technical characteristics of "ZONT H1"

A large number of materials on the Internet are devoted to setting up the ZONT EVAN H-1 GSM modem. This article is devoted to setting up an analogue called ZONT H-1 V, in a modular design for a DIN rail. made of gray plastic, top cover with logo image, removable. The connectors are located at the bottom.

Included in the package modular block power supply also for DIN rail installation. There is no power cord with plug. Output - 12 Volts direct current. Power is connected to pins 9 and 7, do not confuse polarity!

The protective cover of the modem is removed using a miniature flat screwdriver, under it there is a SIM card slot, LEDs and a jumper for turning on the battery. The function of LEDs is the same as in

The passport indicates the assignment of the contacts in the connector. Let me immediately draw your attention to the fact that there is an error in the passport: normally closed contact - number 3, not 2, as indicated in the passport. We verify this by measuring the resistance between the contacts.

When the yellow LED is on (the boiler is working), contacts 1 and 2 are closed. That is, the 2nd contact is normally open. All gas boilers with a jumper in the thermostat circuit are connected to contacts 1-2 of the GSM modem (the jumper is first removed).

We connect the temperature sensor in accordance with the diagram in the passport on pins 4 and 6. We don't confuse polarity!

The modem kit also includes a 220/12V converter to convert a 220 Volt emergency signal to an acceptable value of 12 Volts. This voltage can be safely applied to input “8” of the GSM modem.

The modem settings in your ZONT-ONLINE personal account do not differ from the modem settings.

Additional technical advice can be obtained online, to do this, fill out Technical support request form.

GSM-Climate ZONT H-1 - heating boiler remote control unit

• Control of an electric or gas boiler from the phone and via the Internet;
• Notification about the activation of security sensors (GSM alarm);
• Installation in a convenient location;
• Controls the temperature in the house;
• Saves heating resources;
• Maintains comfortable temperature conditions;
• Warns of a boiler failure;
• Informs about penetration into the premises;
• The maximum number of sensors is 5;
• Recommended for self-installation.

Among other things, Micro Line has developed applications for Android and iOS, through which you can control your heating boiler from anywhere in the world.

An intelligent GSM thermostat will control your boiler so that it will heat your home only when it is really needed, maintaining a comfortable temperature in the house according to an individual schedule.

By logging into the application, you can not only find out the temperature in the room, but also set the boiler to preset modes, turn it on according to a schedule, or simply turn off the boiler.

Attention! For correct operation of the GSM module in the Autonomous Republic of Crimea, an operator SIM card is required mobile communications"Wave mobile".
Today, Volna Mobile provides mobile data services in 2G, 3G, 4G standards throughout the Republic of Crimea and Sevastopol.

Control your comfort from your phone, tablet or computer

ZONT H-1 is a room thermostat with its own SIM card, connected to a heating boiler. Commands can be sent to it from any phone, tablet or PC.

For ease of use there is free apps for telephone and personal account on the website. To protect against unauthorized access, access to your personal account is password protected.

Individual setting of operating modes

Comfortable temperature is different for everyone. Some people love tropical heat, others believe that 20-22 degrees is more than enough.

We have provided several home heating modes so that you can select the one you need at the moment in one move.

In addition, you can easily create a weekly operating schedule for your heating boiler for the most optimal consumption of electricity or gas.

Safe boiler operation and comfortable temperature

The thermostat measures the room temperature and turns the output relay on or off, controlling the operation of the boiler so that the room temperature corresponds to the set value.

It monitors the technical condition of the boiler and signals in case of an accident or power outage.

Alert system for all occasions

The thermostat controls the temperature in the house and outside, supply voltage, technical condition of the boiler and much more.

If the values ​​deviate from the specified ones, it informs you about this by call or SMS message.

10 temperature sensors for any purpose.

You can simultaneously connect 10 temperature sensors to the thermostat. These can be either wired or radio sensors.

The main readings are used to control the operation of the boiler. An additional one is assigned to his reserve. If the main thermostat malfunctions, it automatically switches to operation using the backup sensor and control of the boiler does not stop.

The readings of the remaining sensors are used for general monitoring of the heating system.

Easy installation, no special skills required

ZONT H-1 easily connects to an electric or gas boiler instead of a room thermostat. A SIM card of any operator that provides stable reception is inserted into it, and the supply voltage is supplied. You need to send an SMS to the SIM card number from the owner’s phone and “introduce” the devices.

There is no need to pay to use the device

Pay only the actual costs of communication between you and the thermostat according to the tariffs of the selected operator. And no subscription fee!

On which boilers can a ZONT thermostat be installed?

ZONT, ​​in its main purpose, is a simple room thermostat, but only implemented on a hardware platform using a GSM/GPRS modem and WEB technology.

The principle of its operation and the method of connection to any gas or electric boiler is exactly the same as that of conventional thermostats. It connects to the connector for the room regulator and controls the boiler, maintaining the set temperature according to the readings of its temperature sensor. To do this, the thermostat turns the boiler on or off by closing the contacts of its output relay.

Thus, if your boiler provides the ability to control commands from a room thermostat, then the ZONT thermostat can be used with it.

Equipment data

• Modern technologies have firmly entered the lives of many people and have made it much more comfortable. Indeed, now we have access to many benefits of civilization, the existence of which was quite difficult to imagine a few years ago. One of the devices that allows you to create new level comfort is a system Zont H-1. This system helps to remotely control the temperature in the room, monitor the health of the heating boiler, and also control it remotely!

  Convenient heating system control

  In the winter season, maintaining a comfortable climate in the house is usually ensured by a whole group of heating devices, which are not always convenient to control manually. However, with the help of the Zont H-1 smart thermostat, you can easily customize your heating system to suit your needs. This way, the house will always maintain a comfortable temperature.

  Remote control

  In addition, you have the opportunity to control the climate in your home from a distance! You can call or send the necessary command via SMS message to enable any operating mode and find out the balance SIM cards, current system state, etc. This function will be especially useful for users who may be away for a long time on business trips, travel outside the city, etc. You can remotely turn on the economical heating mode, and create a comfortable heating temperature before returning home.

  

  Creating a heating schedule

  Zont H-1 allows you to configure the operation of the heating system in accordance with a specific schedule. For example, if you are only at home in the evenings and on weekends, then the system will maintain a minimum temperature in your absence and provide the necessary heating upon your return. Thus, the system allows save energy resources and your funds.

  How does the system work?

  The thermostat can be controlled using voice menu, sending SMS messages or via an Internet service via PC or smartphone. To use the Internet service, you do not need to install special programs; any modern web browser(Opera, Chrome, IE 8 and above, Firefox). Access to the service is provided through the user’s personal page on the website zont-online.ru. You can also control the device using a special application for Android, which is available for download at Play Market.

  

  Through your personal account on the zont-online.ru service. the user needs to set comfortable temperature values, as well as threshold levels for generating alarms when the temperature deviates to a critical value.

  Zont H-1 receives information about temperature changes using temperature sensor supplied with the system. Depending on the sensor readings, the thermostat turns off or turns on the output relay, which controls the operation of the boiler. This principle of operation allows you to maintain the required temperature in the house.

  If a malfunction occurs in the operation of the heating boiler, Zont H-1 will notify the owner, which will allow a prompt response to this event.

  System functionality

  Indoor temperature change alert: t˚above the set threshold t˚below the set threshold Notification when a malfunction occurs: if the temperature sensor is faulty in case of boiler failure Event memory: temperature sensor readings SMS commands changes in operating modes power on/off updates software(BY) Indoor temperature monitoring: update period - 1 minute

  Boiler operating mode control: SMS commands via internet service Internet access: constant connection with the server viewing temperature graphs for any period of time display of thermostat status (room temperature, current operating mode, emergency operating mode indication) transfer of accumulated data changing the thermostat operating mode “in one click” entering and editing settings weekly temperature schedule editor Remote software update: The current firmware version is updated from personal account user at his command.

  Supply voltage: 10-14 V

  Maximum current consumption: 150 mA

  One analog input

  One dry contact output (make/break)

  Maximum current through relay contacts: 1000 mA

  WEB interface

  1-Wire interface

  Operating temperature range: from -30 to +55 °C

  GSM modem frequency ranges: 800, 900, 1800, 1900 MHz

  GPRS data channel

  Built-in GSM antenna (optional can be external)

  Internal non-volatile memory

  Backup battery: BL-5C 1000 mA*N (optional)

  Time to reach operating mode: no more than 50 seconds.

  Overall dimensions: 77 x 86 x 33 mm

  Weight: 0.200 kg.

  Plastic case

  Individual packing

  External GSM antenna

  Terminal block (2 pcs.)

  Mounting base

  Thermostat

  Digital temperature sensor

  Network adapter 220/12 V.

  The thermostat does not come with a battery or SIM card.

  
  Total weight: 1.19 kg Sold: 29 pcs Manufacturer: Russia

  “ZONT H-1” is a module for remote monitoring and control of a heating boiler. Configuration and management are carried out via GSM channel and via the Internet. In accordance with given parameters, automatically regulates the operation of the boiler in heating mode to maintain the desired room temperature. Also, the device can monitor the technical condition of the boiler and signal a malfunction if an accident occurs or the power supply is cut off.

  Why should you buy "ZONT H-1"

  • Control from your phone, tablet or computer. Commands can be sent to the thermostat from any phone, tablet or PC. For ease of use, there are free phone applications and a personal account on the website. To protect against unauthorized access, access to your personal account is password protected.
  • Customization operating modes. It is possible to set up several home heating modes in advance, so that in the future you can select the desired mode at the moment with one movement.
  • 10 temperature sensors for any purpose. You can simultaneously connect 10 temperature sensors (wired or radio sensors) to the thermostat. The main readings are used to control the operation of the boiler. An additional one is assigned to his reserve. If the main thermostat malfunctions, it automatically switches to operation using the backup sensor and control of the boiler does not stop. The readings of the remaining sensors are used for general monitoring of the heating system.
  • Alert system for all occasions. The thermostat controls the temperature in the house and outside, supply voltage, technical condition of the boiler and much more. If the values ​​deviate from the specified ones, it informs you about this by call or SMS message.
  • Simple installation that does not require special skills. Easily connects to an electric or gas boiler instead of a room thermostat. A SIM card of any operator that provides stable reception is inserted into the device, and the supply voltage is supplied. You need to send an SMS to the SIM card number from the owner’s phone and “introduce” the devices.

  Capabilities of the GSM module “ZONT H1”

  • Through a free WEB interface, the following options are provided: real-time display of the current state of the boiler and the temperature in the room, control of the boiler operating mode, monitoring of temperatures (inside, outside the room, coolant) for any selected period of time, programming the boiler operation according to a weekly schedule, display notifications about the activation of additionally installed sensors.
  • Remote control of the boiler operation can be carried out via SMS, calling the voice menu, via the Internet (WEB interface and mobile app for Android and iOS devices).
  • Notification of events: deviation of the measured temperature from the specified threshold values, boiler failure (provided the thermostat is connected to the emergency output of the boiler), malfunction of the temperature sensor and transition of the thermostat to emergency operation mode, loss/restoration of power (mains) (only with a backup battery installed) .
  • Using the module for GSM security - monitoring the status of additional sensors (security or water leaks/gas leaks) connected to the “Alarm” input of the thermostat.
  • Event memory: diary of measured temperatures for any period without a statute of limitations, date and time of detection of a boiler failure, date and time of change in the operating mode of the boiler and thermostat, list of executed control commands via the voice menu, transmitted by SMS, software updates, date and time of loss/recovery power supply (network).
  • Remote software update without disconnecting the module itself and dismantling it.

  For which boilers is the GSM thermostat “ZONT H-1” suitable?

  The “ZONT H-1” module is essentially a simple room thermostat, but only implemented on a hardware platform using a GSM/GPRS modem and WEB technology. The principle of its operation and the method of connection to any gas or electric boiler is exactly the same as that of conventional thermostats. It connects to the connector for the room regulator and controls the boiler, maintaining the set temperature according to the readings of its temperature sensor. To do this, the thermostat turns the boiler on or off by closing the contacts of its output relay.

  Thus, if your boiler provides the ability to control commands from a room thermostat, then the ZONT H-1 thermostat can be used with it.

  Technical characteristics of "ZONT H1"

  Supply voltage	10-28 V
  Maximum current consumption	150 mA
  Number of inputs	2
  Output dry contact (make/open)	1
  Type of connected wired temperature sensors	DS 18S20
  Type of connected radio thermal sensors	ML-703
  Total number of simultaneously connected temperature sensors	10
  Maximum permissible length of cable with temperature sensors	100 m
  Maximum current through relay contacts	1000 mA
  Maximum voltage of switched relay contacts	~120 V, DC 24 V
  Voice interface	There is
  WEB interface	There is
  1-Wire interface	There is
  Operating temperature range	from -30 to +55 °С
  GSM modem frequency ranges	800, 900, 1800, 1900 MHz
  Data link	GPRS
  GSM antenna	external
  Internal non-volatile memory	There is
  Time to reach operating mode	no more than 50 seconds
  Average service life	7 years
  dimensions	77 x 86 x 33 mm
  Weight	no more than 200 g
  Housing material	ABC plastic

  Delivery set "ZONT H-1"

  • Thermostat "GSM-Climate ZONT H-1".
  • Mounting base.
  • Power adapter from 220 V mains.
  • GSM antenna.
  • Wired temperature sensor.
  • Screw terminal blocks.
  • SIM card.
  • User guide.
  • Warranty card.
  • Branded packaging.

  Buy Zont H-1 GSM-Climate- means getting ownership of a compact thermostat with its own SIM card from any operator, which allows you to control the indoor climate from any phone (satellite, mobile or fixed line), tablet or PC. Manufactured by Micro Line specifically for the Russian manufacturer of heating boilers Evan.

  Zont H1 GSM-Climate will ensure economical consumption of fuel spent by the boiler for heating, will allow you to remotely set the temperature in the house and monitor the proper operation of the heating boiler, as well as remotely control its operation!
  Agree that manual control of heating devices is quite troublesome, and from a distance it is almost impossible. With Zont H 1 block remote control A heating system is not only possible, but also extremely simple and convenient! No matter how far from home you are, all you need to do is call or send a command with mobile phone or via the Internet to change the heating boiler mode and ensure a comfortable temperature in the house. Convenient, isn't it?

  New opportunities!

  Additional functions of the device allow you not only to save heating costs and control the operation of the heating boiler, but also to monitor the safety of the facility! The user can connect additional sensors, for example, motion, disconnection, water leaks, gas leaks, fire and smoke sensors, etc. Information is transmitted via mobile communications and the Internet.

  Features of Zont H-1 GSM-Climate

  Supports various preset temperature modes:
  Economy - economical fixed temperature.
  Comfort - a comfortable fixed temperature (usually a few degrees higher than the economical temperature).
  Schedule - maintaining the set temperature according to a schedule.
  Off - anti-freeze mode
  Alarm – thermostat operating mode when the temperature sensor is faulty.

  The module will call only the owner’s phone or trusted numbers determined by him, warning him about all changes or emergency situations. Accordingly, Zont GSM-Climate can receive commands only from the owner or from “its” phones. Unauthorized access is absolutely excluded - even if someone dialed the number by mistake, the device will ask for a password that only the owner and, for example, other family members or trusted persons know. In addition to SMS control, it is possible to control via the voice menu.
  In fact, the GSM Climate Zont H1 module acts as your personal assistant - you called it, gave a command, for example, to heat it hotter in advance, and the whole family will eventually arrive in a warm and cozy home. Or vice versa: if you forgot to turn down the power in the morning when leaving for work - no problem, you can do it right from work, via the Internet.

  Unlike competitors, it does not have a control panel and all monitoring and control operations are performed using either personal computer, or mobile devices: a smartphone or tablet, which allows the owner to control the situation wherever he is, while significantly reducing the cost of the equipment.
  Zont-H1 unit works even when lost cellular communications, executing, for example, a predetermined weekly schedule.
  It is possible to use control commands in the form of SMS text and even using the voice menu.
  Used simple, functional and convenient GUI via a web browser or mobile application. All data is stored on the server and at any time you can view convenient and visual system operation graphs, information messages, or make the necessary settings.
  Most boilers have terminals closed with a jumper (corresponding to the boiler being on) for connecting a room thermostat. It is to these terminals that the Zont-H modules are connected: this jumper is removed and the Zont H relay contacts are connected in its place.

  New!

  Weather-dependent automation - energy-efficient heating control taking into account changes in outside temperature (the function is available for modules with firmware version 122:74 and higher)

  How does the GSM-Climate thermostat control the boiler?

  The thermostat measures the room temperature and turns the output relay on or off, controlling the operation of the boiler in heating mode so that the room temperature corresponds to the set value.
  It controls the temperature in the house and outside, the supply voltage, the technical condition of the boiler and signals in the event of an accident or power failure. If the values ​​deviate from the specified ones, he informs the owner in any pre-selected way: by calling, SMS message or notification via the Internet.

  

  To use the Internet service, you do not need to install additional software; work is carried out using any modern WEB browser. Access to the Internet service is provided through a personal page on the zont-online.ru server
  From your personal account on the Internet service zont-online.ru, you need to set the desired indoor temperature values, as well as threshold levels for generating alarm messages when the temperature deviates to a critical (emergency) value.
  The unit analyzes changes in indoor temperature using its own remote temperature sensor. Depending on the measurements taken, it turns on or off the output relay, which controls the operation of the boiler in heating mode so that the indoor temperature corresponds to the value of the set operating mode.
  If a boiler malfunction occurs, the system will immediately notify the owner of this event, which will help avoid troubles.

  

  Functionality of the GSM thermostat Zont H-1 GSM-Climate

  Remote control of the boiler operation can be carried out:
  - SMS commands;
  - when dialing a SIM card number using the voice menu;
  - via the Internet (WEB interface and mobile applications for Android and iOS devices).

  Convenient and simple WEB interface with the following capabilities:
  - displaying the current state of the boiler and room temperature;
  - boiler operation control;
  - temperature monitoring (inside, outside the room, coolant) for any selected period of time;
  - programming the boiler operation according to a schedule;
  - notifications about the activation of additional sensors.

  Various event alerts:
  - when the measured temperature deviates from the specified threshold values;
  - about a boiler failure (provided the thermostat is connected to the emergency output of the boiler);
  - about a malfunction of the temperature sensor and the thermostat going into emergency mode;
  - about the loss or restoration of power supply, in which case it is necessary to have a backup battery;

  The event log
  - a diary of measured temperatures for any period without a statute of limitations;
  - date and time of detection of the boiler failure;
  - date and time of changing the operating mode of the boiler and thermostat;
  - list of executed control commands via voice menu, transmitted by SMS, software updates;
  - date and time of power failure or restoration.

  Signaling about the status of additional sensors connected to the “Alarm” input of the thermostat;
  Memorizing events:
  - temperature sensor readings;
  - date and time of the boiler accident;
  - changes in operating modes;
  - voice menu commands
  - SMS commands;
  - software updates;
  - power on/off.
  Update the current version of the unit’s firmware without turning it off and removing it from the user’s personal account.

  Connection diagrams for the Zont H-1 GSM-Climate thermostat

  

  

  Scope of delivery Zont H-1 GSM-Climate

  Thermostat
  Mounting base
  Digital temperature sensor
  Terminal blocks (2 pcs.)
  Network adapter 220/12 V.
  External GSM antenna
  Passport
  Backup battery (optional)

  

  Technical characteristics of the Zont H-1 GSM-Climate thermostat

  Article: 112005 (Evan), ML12074 (Micro Line)
  Manufacturer: Micro Line (ordered by Evan)
  Supply voltage, volts: 10 - 28
  Maximum current consumption, mA: 150
  One analog input
  One dry contact output (make/break)
  Maximum voltage of switched relay contacts: AC. 120 V, DC 24 V
  Maximum current through relay contacts, mA: 1000
  Adjustable hysteresis, °C: +/-0.1 - 2
  Voice interface: yes
  WEB interface: yes
  1-Wire interface: yes
  Operating temperature range, °C: from -30 to +55
  GSM modem frequency ranges, MHz: 800, 900, 1800, 1900
  GPRS data channel: yes
  External GSM antenna: yes
  Internal non-volatile memory: yes
  Time to reach operating mode, sec: no more than 50
  Overall dimensions, mm: 77 x 86 x 33
  Weight, grams: 200
  High-strength plastic housing
  Additional compatible Zont equipment: ML-489, ML-703, Zont Home, OpenTherm interface, Astra-9, Astra 512, Astra C, IO 102-16/2, Astra 361, ML-711, ML-712